DOD MIL-S-37205-1976 SURVIVAL KIT INDIVIDUAL《个人求生背包》.pdf

1、MILITARY SPECIFICATION SURVIVAL KIT, INDIVIDUAL This specification is approved for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 This specification covers a kit containing specified medical and survival items for individuals stranced in isolated areas. 2. APPLICABLE

2、DOCUKENTS 2.1 Issues of documents. The following documents of the issue in effect on date of invitation for bids or request for proposal form a part of this specification to the extent specified herein: SPECIFICATIONS FEDERAL L-P-375 L-P-378 L-P-390 EE-B-575 EE-M-101 QQ-A-25011 PPP-B-566 PPP-B-636 P

3、PP-B-676 PPP-T-60 PPP-T-97 STANDARDS MILITARY MIL-STD-105 MIL-STD-129 Plastic Film, Flexible, Vinyl Chloride. Plastic Sheet and Strip, Thin Gauge, Polyolefin. Plastic Molding and Extrusion Material, Polyethylene and Copolymers (Low, Medium, and High Density). Bouillon, (Soup and Gravy Bases). Match,

4、 Safety and Match Non-Safety (Strike Aluminum Alloy 1100, Plate and Sheet. Boxes, Folding, Paperboard. Boxes, Shipping, Fiberboard. Boxes, Setup. Tape, Packaging, Waterproof Tape, Pressure-Sensitive Adhesive Filament Reinforced. Anywhere). Sampling Procedures and Tables for Inspection by Marking for

5、 Shipment and Storage. Attributes. FSC 6545 G Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIGS-37205 DRAWING Defense Personnel Support Center (DPSC) 24336 SURVIVAL KIT, INDIVIDUAL (Copies of specifications, standards, drawings, and publications r

6、equired by contractors in connection with specific procurement functions should be obtained from the procuring activity or as directed by the contracting officer . ) 3. REQUIREMENTS 3.1 Components. The survival kit shall consist of a molded polyethylene container packed with the components listed on

7、 the Drawing. 3.2 Materials. Except as specified herein, materials shall conform to the applicable portions of the specifications, standards, and drawhgs specified herein and shall be capable of meeting the requirements shown therein. men materials are not specifically designated, those used shall b

8、e Of the highest Commercial quality and entirely suitable for the purpose intended. 3.2.1 Plastic for containers. Containers shall be molded of polyethylene plastic conforming to the requirements of L-P-390 for type I, class 1. thickness of the plastic shall be 0.050 - 0.072 inch. semi-rigid and suf

9、ficiently transparent as to permit labels and identification cards, printed as specified herein, to be read through two thicknesses of ma- terial without difficulty. Plastic shall be sufficiently flexible to conform to the shape of the packaged material at the open ends of the container shells, whil

10、e retaining its molded shape at the closed ends. The The plastic shall be 3.2.2 Polyethylene bags. The polyethylene bags used to contain individual components shall be fabricated of clear natural color lay-flat tubing conform- ing to the requirements of L-P-378, Type I, Class 1. The minimum average

11、wall thickness of the bag shall be 0.003 inch with no less than 80% of the nominal wall thickness at any point. vent moisture from entering or to prevent escape of fluid contents in the event of leakage; excess air shall have been excluded from the sealed bag so that bag conforms to the shape of the

12、 component therein. of excess material, the width of commercially available tubing shall be of a dimension which shall closely fit the individual component to be enclosed. The length of the tubing between seals shall be the minimum to contain the component. containing an individual-item shall be cap

13、able of passing the leakage test specified in 4.3.1. Both seam and closure shall br heat sealed to pre- To insure A minimum Excess tubing beyond the seals shall be cut off. Each sealed bag 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-37205

14、 65 7997706 026540LI 5 MIL-S-37205 3.2.3 Tape for handles. Tape for top and bottom section handles, shall conform to the requirements of PPP-T-97, Type II, class B. for top section shall be 9 inches 5 1/4 inch; length of handle for bottom section shall be 8-1/2 inches t1/4 inch. shall be applied as

15、a shield to the exposed adhesive area of each handle. Length of handle A length of suitable plastic tape 3.3 Rit contents. At the time of kit assembly, all components within the kit shall have sufficient remaining shelf life to support the assembled kit through its first 12 months. 3.3.1 Government

16、furnished components. The components listed below shall be furnished to the contractor by the Government. quantity of each of the potency dated components, the contractor shall de- termine from the marked expiration date(s) that at least 12 months potency remains beyond his predetermined assembly da

17、te. termine, when applicable, that each component is legibly marked. On receipt of the required The contractor shall de- NSN - Item Identification Expiration Dated Potency(P) Items 6505-00-118-1948 Aspirin Tablets, USP, 0.324 Gram, P 6505-00-183-9419 Sodium Sulfacetamide Ophthalmic Oint- P 6505-00-9

18、14-3593 Povidone-Iodine Solution, NF, lo%, P 100s ment, USP, lo%, 1/8 oz. (3.5 Gram). 1/2 fl. oz. (14.8 ce), 50s 6510-00-200-3080 Compress and Bandage, Camouflaged, 4 by 4 inches. inch by 1 yard, 100s. 300s. 50s. 6510-00-782-6426 Adhesive Tape, Surgical, Camouflaged, 1 P 6510-00-913-7909 Bandage, Ad

19、hesive, 3/4 by 3 inches, * 6850-00-985-7166 Water Purification Tablet, Iodine, 8 mg, * * Difference between predetermined date of assembly and date of manufacture shall not exceed 23 months. * Not less than 12 months remaining from predetermined assembly date to retest date. 3.3.2 Contractor furnish

20、ed components. The components specified herein shall be furnished by the contractor. 3.3.2.1 Aluminum foil. Foil shall be alloy 1100 and shall conform to QQ-A-250/1, temper O (Annealed). be furnished in 12 5 1/8 by 12 2 1/8 inch squares. into a smaller square approximately 3 inches by 3 inches. Shal

21、l be 0.003 inch thick, minimum, and shall Each square shall be folded 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- MIL-S-37205 65 = 9977906 0265L105 7 MIL-S-37205 3.3.2.2 Fish hooks and line. One fish hook shall be snelled with a nominal six (6

22、) inch leader to each end of a nine (9) pound test nylon fish- ing line six (6) yards f. 3 inches long. 6, Carlisle type. ethylene core around which the fishing line shall be evenly wound to make a thin, flat package 2 inches + 1/8 inch long by 1 inch + 1/8 inch wide. The wrapped line shall not bulg

23、eat the center of the plastic core. shal be wrapped to prevent the hooks from puncturing or tearing other items in the kit, and the line from unraveling. The package shall be labeled as to contents. Both fish hooks shall be size number The fish hooks shall be attached to a suitably sized poly- The p

24、ackage 3.3.2.3 Matches, safety, humidity resistant, 20s. The matches shall con form to the requirements of EE-M-101 for type II, class 2. An assembled booklet shall be 2 + 1/16 inches long, 1-1/2 5 1/16 inches wide, and 1/4 + 1/8 inch thick at the match tip end of the booklet. Each booklet shall be

25、packaged individually in a bag made of clear polyethylene, as specified in 3.2.2 be well sealed to prevent moisture from affecting the matches. each booklet of matches shall be legibly marked as follows: Closures of the bag shall be effected by heat sealing. Closures shall The cover of MATCHES Store

26、 in plastic bag when not in use“ 3.3.2.4 Soaped tissues, wrapped, 3s. Three soaped tissues, approximate1 4-1/2 inches bv 4-1/2 inches, shall be folded together to form a thin, flat Y Y rectangular pack approximately 2-1/2 inches by 1:3/4 inches. together .with a label, shall be inserted in a plastic

27、 bag (3.2.2). shall be marked as follows: Each package, The label “SOAPED TISSUES Dampen skin, rub with tissue, rinse and dry“ The plastic bag shall be closed by heat sealing to prevent moisture from en- tering the bag and affecting the tissues. 3.3.2.5 Soup and gravy base, instant, chicken flavored

28、, 7 gram envelope. The chicken flavored instant soup and gravy base envelopes shall conform to the requirements of EE-B-575, Type II, Class 1, Style A. information for Military agencies required to be printed on the envelope in accordance with Section 5 of EE-B-575, the month and year of manufacture

29、 shall also be printed on each envelope. survival kit shall legibly print the month and year of manufacture on the envelope in a contrasting bolor. from the date of manufacture of the chicken flavored soup and gravy base to the date of assembly of the survival kit. In addition to the As an alternate

30、, the contractor for the No more than three months shall have elapsed 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-37205 65 9997906 0265406 7 MIL-37205 3.3.2.6 Tropcal chocolate bar,l oz. The bar shall weigh a nominal 1 , and consist of ch

31、ocolate, sugar, non-fat solids, cocoa butter, Vitamin B, and artificial flavoring. wrapped in a moisture-proof glassine paper and shall be labeled as to contents. wide by 1/2 inch thick. “Hersheys Tropical Bar“. shall be legibly printed or stamped on each wrapped bar by the manufacturer or kit contr

32、actor. shall not obliterate existing markings. elapsed from the date of manufacture of the bars to the date of assembly of the survival kit. fied in 3.2.2. Each bar shall be individually Each bar shall measure a nominal 3 inches long by 1-1/4 inches In addition, the month and year of manufacture Cho

33、colate bar shall be Hershey Food Corporations Location of the additional marking is optional, but No more than 3 months shall have Each bar shall be packaged in a polyetylene bag as speci- 3.4 Construction of plastic kit container. The kit container shall be fabricated of polyethylene as specified i

34、n 3.2.1, and molded in accordance with the requirements shown on DPSC Drawing 24336, revised 5 March 1975. Removal of the telescopic top section from the bottom section shall be facili tated by the use of tape handles (see 3.2.3) positioned as shown on the drawing. curely affixed to its respective s

35、ection. Each handle shall provide the specified finger space and be se- 3.5 Identification card. The identification card shall provide a listing of the kit contents. The list shall include, where applicable, the National Stock Number, item identification, quantity, use, and dosage, as shown on the D

36、rawing. This information shall be printed with waterproof ink on a strip of waterproof paper approximately 3 inches wide by 6 inches long. Minimum type size shall be 5 point. sitioned “U“ shaped over the tops of components of a fully loaded bottom section in such a manner that the information can be

37、 read through the con- tainer of the assembled kit. The ends of the card shall not protrude be- yond the edges of the top section. to permit printing the entire contents on one side, may all or part of the components listed on the drawing as having obvious usages be printed on the back of the card.

38、the immersion test specified in 4.3.2. The identification card shall be po- Only when the card size is insufficient Each identification card shall be capable of passing 3.6 Preparation for assembly. 3.6.1 Aspirin tablets, USP, 0.324 G-ram, 100s. A card of 10 tablets shall The packet shall be secured

39、 in be accordian folded, each tablet slightly offset from the tablet above and below it, to form a packet of suitable size. the middle by a neoprene rubber band. 5 e Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-37205 65 = 7733706 0265407 O _

40、 _. MIL-S-37205 . _- 3.6.2 Compress incorrect; illegible; improper size, location, sequence or method of application. Mat erial Workmanship Component missing or damaged. Bulging or distortion of containers. 4.2.2.2.1 Inspection of closure, waterproofing and banding of container. When the shipping co

41、ntainer is required to comply with PPP-B-636, the in- spection for defects in closure, waterproofing or banding shall be in ac- cordance with the appendix of the box specification. 4.2.3 Sampling for tests. Sampling for tests shall be conducted in ac- cordance with MIL-STD-105 , Inspection Level S-2

42、 , Acceptable Quality Level 4.0. Unit of product for test purposes shall be one kit. 8 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-37205 65 m 7777706 0265LtLO O W MIL-S-37205 4.2.4 Sampling unit usage. Where possible, the same sample unit 4

43、.3 Tests. Testsshall be conducted to determine compliance with speci- shall be used for the determination of two or more test characteristics. fication requirements. 4.3.1 Leakage test. Sealed, filled polyethylene bags (see 3.2.2) shall be submerged to a depth of one foot in tap water for 15 minutes

44、. shall be removed, opened, and examined for evidence of leakage of water, Bags 4.3.2 Immersion test. Two copies of the Identification card (see 3.5) There shall be no de- shall be fully immersed in tap water for 24 hours. leterious effects such as running ink or shredded paper. 5. PACKAGING 5.1 Pac

45、kaging requirements, Packaging shall be level A or C as specified (see 6.1). 5.1.1 Level A. 5.1.1.1 Unit package. Each kit (components in rigid plastic case) shall be packaged in a bag fabricated of virgin polyethylene conforming to L-P- 375. inch with no wall thickness at anypoint below 0.0035 inch

46、. be evacuated from the bag and the closure effected by heat sealing. shall be of sufficient length so that the heat seal closure shall be 1-3/4 inches + 1/8 inch from the bottom of the plastic kit conta ner,pos tioned in the Fag. The unit shall be further packaged in a snug fittmg &ox con- structed

47、 in accordance with PPP-B-566 or PPP-E-676. Closure of the box shall be secured to prevent spilling of contents. The tubing shall have an average thickness of not less than 0.004 Excess air shall The bag 5.1.2 Level C. Each kit shall be packaged in a polyethylene bag as speci- fied in 5.1.1.1 and fu

48、rther packaged in a snug fitting box that will afford adequate protection against physical damage during shipment from supply source to the first receiving activity. 5.2 Packing. Packing shall be level A, B or C as specified (see 6.1). 5.2.1 Level A. 5.2.1-1 Exterior container. Ninety six unit packa

49、ges shall be packed in an exterior container designed for a type 2 load and constructed in accordance with PPP-B-636, type CF, class weather-resistant, grade V3c. and waterproofing shall be as specified in the appendix of PPP-B-636. The box shall contain top and bottom pads fabricated of fiberboard conforming to type CF, class domestic of PPP-B-636. two or more tiers, a pad shall be interposed between each tier. Strapping shall not be required for shi