DOT 49 CFR PART 566-2010 MANUFACTURER IDENTIFICATION.pdf

1、214 49 CFR Ch. V (10110 Edition) Pt. 566 information shall be submitted to the agency for VINs containing an amend-ed coding. The agency will not rou-tinely provide written approvals of these submissions, but will contact the manufacturer should any corrections to these submissions be necessary. (d)

2、 The information required under paragraph (c) of this section shall be submitted at least 60 days prior to of-fering for sale the first vehicle identi-fied by a VIN containing that informa-tion, or if information concerning vehi-cle characteristics sufficient to specify the VIN code is unavailable t

3、o the manufacturer by that date, then within one week after that information first becomes available. The information shall be addressed to: Administrator, National Highway Traffic Safety Ad-ministration, 1200 New Jersey Avenue, SE., Washington, DC 20590, Attention: VIN Coordinator. PART 566MANUFACT

4、URER IDENTIFICATION Sec. 566.1 Scope. 566.2 Purpose. 566.3 Application. 566.4 Definitions. 566.5 Requirements. 566.6 Submittal of information. AUTHORITY: Secs. 112 and 119, National Traffic and Motor Vehicle Safety Act (15 U.S.C. 1401 and 1407); delegation of authority at 49 CFR 1.50. 566.1 Scope. T

5、his part requires manufacturers of motor vehicles, and of motor vehicle equipment to which a motor vehicle safety standard applies, to submit iden-tifying information and a description of the items they produce. 36 FR 20978, Nov. 2, 1971 566.2 Purpose. The purpose of this part is to facili-tate the

6、regulation of manufacturers under the National Traffic and Motor Vehicle Safety Act, and to aid in estab-lishing a code numbering system for all regulated manufacturers. 36 FR 20978, Nov. 2, 1971 566.3 Application. This part applies to all manufactur-ers of motor vehicles, and to manufac-turers of m

7、otor vehicle equipment, other than tires, to which a motor ve-hicle safety standard applies (hereafter referred to as covered equipment). 36 FR 22063, Nov. 19, 1971 566.4 Definitions. All terms defined in the Act and the rules and standards issued under its au-thority are used as defined therein. Sp

8、ecifically, incomplete vehicle, inter-mediate manufacturer, and final-stage manufacturer are used as defined in Part 568Vehicles Manufactured in Two or More Stages. (Authority: 15 U.S.C. 1392, 1397) 37 FR 1364, Jan. 28, 1972 566.5 Requirements. Each manufacturer of motor vehi-cles, and each manufact

9、urer of covered equipment, shall furnish the informa-tion specified in paragraphs (a) through (c) of this section to: Administrator, National Highway Traffic Safety Ad-ministration, 400 Seventh Street SW., Washington, DC 20590. (a) Full individual, partnership, or corporate name of the manufacturer.

10、 (b) Residence address of the manufac-turer and State of incorporation if ap-plicable. (c) Description of each type of motor vehicle or of covered equipment manu-factured by the manufacturer, includ-ing, for motor vehicles, the approxi-mate ranges of gross vehicle weight ratings for each type. (1) E

11、xcept as noted below, the de-scription may be of general types, such as passenger cars or brake fluid. (2) In the case of multipurpose pas-senger vehicles, trucks, and trailers, the description shall be specific enough also to indicate the types of use for which the vehicles are intended, such as ta

12、nk trailer, motor home, or cargo van. (3) In the case of motor vehicles pro-duced in two or more stages, if the manufacturer is an incomplete vehicle manufacturer, the description shall so state and include a description indi-cating the stage of completion of the VerDate Mar2010 14:39 Dec 20, 2010 J

13、kt 220217 PO 00000 Frm 00224 Fmt 8010 Sfmt 8010 Y:SGML220217.XXX 220217jdjones on DSKHWCL6B1PROD with CFRProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-215 Natl Highway Traffic Safety Admin., DOT 567.3 vehicle and, where known, the types of use for

14、which the vehicle is intended. Example: Incomplete vehicle manufac-turerChassis-cab intended for completion as van-type truck. If the manufacturer is an intermediate manufacturer, or a final stage manu-facturer, the description shall so state and include a brief description of the work performed. Ex

15、ample: Multipurpose passenger vehicles: Motor homes with GVWR from 8,000 to 12,000 pounds. Final-stage manufactureradd body to bare chassis. (15 U.S.C. 1392, 1397) 36 FR 20978, Nov. 2, 1971, as amended at 37 FR 1364, Jan. 28, 1972 566.6 Submittal of information. Each manufacturer required to sub-mit

16、 information under 566.5 shall sub-mit the information not later than February 1, 1972. After that date, each person who begins to manufacture a type of motor vehicle or covered equip-ment for which he has not submitted the required information shall submit the information specified in paragraphs (a

17、) through (c) of 566.5 not later than 30 days after he begins manufacture. Each manufacturer who has submitted required information shall keep his entry current, accurate and complete by submitting revised information not later than 30 days after the relevant changes in his business occur. 36 FR 209

18、78, Nov. 2, 1971, as amended at 53 FR 20119, June 2, 1988 PART 567CERTIFICATION Sec. 567.1 Purpose. 567.2 Application. 567.3 Definitions. 567.4 Requirements for manufacturers of motor vehicles. 567.5 Requirements for manufacturers of ve-hicles manufactured in two or more stages. 567.6 Requirements f

19、or persons who do not alter certified vehicles or do so with readily attachable components. 567.7 Requirements for persons who alter certified vehicles. AUTHORITY: 49 U.S.C. 322, 30111, 30115, 30117, 30166, 32502, 32504, 3310133104, 33108, and 33109; delegation of authority at 49 CFR 1.50. SOURCE: 7

20、0 FR 7430, Feb. 14, 2005, unless otherwise noted. 567.1 Purpose. The purpose of this part is to specify the content and location of, and other requirements for, the certification label to be affixed to motor vehicles as required by the National Traffic and Motor Vehicle Safety Act, as amended (the V

21、ehicle Safety Act) (49 U.S.C. 30115) and the Motor Vehicle Informa-tion and Cost Savings Act, as amended (the Cost Savings Act), (49 U.S.C. 30254 and 33109), to address certification-re-lated duties and liabilities, and to pro-vide the consumer with information to assist him or her in determining wh

22、ich of the Federal Motor Vehicle Safety Standards (part 571 of this chapter), Bumper Standards (part 581 of this chapter), and Federal Theft Prevention Standards (part 541 of this chapter), are applicable to the vehicle. 567.2 Application. (a) This part applies to manufactur-ers including alterers o

23、f motor vehicles to which one or more standards are ap-plicable. (b) In the case of imported motor ve-hicles that do not have the label re-quired by 49 CFR 567.4, Registered Im-porters of vehicles admitted into the United States under 49 U.S.C. 30141 30147 and 49 CFR part 591 must affix a label as r

24、equired by 49 CFR 567.4, after the vehicle has been brought into con-formity with the applicable Safety, Bumper and Theft Prevention Stand-ards. 567.3 Definitions. All terms that are defined in the Act and the rules and standards issued under its authority are used as defined therein. The term bumpe

25、r has the meaning assigned to it in Title I of the Cost Savings Act and the rules and standards issued under its authority. Addendum means the document de-scribed in 568.5 of this chapter. Altered vehicle means a completed ve-hicle previously certified in accordance with 567.4 or 567.5 that has been

26、 al-tered other than by the addition, sub-stitution, or removal of readily attach-able components, such as mirrors or tire and rim assemblies, or by minor VerDate Mar2010 14:39 Dec 20, 2010 Jkt 220217 PO 00000 Frm 00225 Fmt 8010 Sfmt 8010 Y:SGML220217.XXX 220217jdjones on DSKHWCL6B1PROD with CFRProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-