ECA EIA-198-3-E-1998 Ceramic Dielectric Capacitors Classes I II III and IV Part III Individual Specifications (Replaces EIA 198-D).pdf

1、STDmEIA 178-3-E-ENGL 1978 B 3234b00 05893b4 272 ELECTRONIC INDUSTRIES ASSOCIATION ENGINEERINGDEPARTMENT ANSVEIA-19 8 - 3-E Approved: December 12, 1997 EIA STANDARD Ceramic Dielectric Capacitors Classes I, II, III, and IV Part III: Individual Specifications EIA-198-3-E (Revision of EIA-198-D) JANUARY

2、 1998 STD-EIA L98-3-E-ENGL 1998 = 3234600 05893b5 109 = NOTICE EIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting t

3、he purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of EIA fiom manufacturing or selling products not conforming to such Standards and Publication

4、s, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than EIA members, whether the standard is to be used either domestically or internationally. Standards and Publications are adopted by EIA in accordance with the American National Standards Inst

5、itute (ANSI) patent policy. By such action, EIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This EL4 Standard is considered to have International Standardization implication, but the International Elec

6、trotechnical Commission activity has not progressed to the point where a valid comparison between the Em Standard and the IEC document can be made. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibilit

7、y of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 3931, formulated under the cognizance of the EIA P-2.1 Subcommittee on Ceramic and Mica Dielectric.) Published

8、 by ELECTRONIC INDUSTRIES ASSOCIATION 1998 Engineering Department 2500 Wilson Boulevard Arlington, VA 2220 1 PRICE: Please refer to the current Catalog of EM, JEDEC, and TIA STANDARDS and ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (30

9、3-397-7956) All rights reserved Printed in U.S.A. STD-EIA 198-3-E-ENGL 1778 3234b00 05873bb 045 EIA-198-3-E Ceramic Dielectric Capacitors Classes I, II, 111, and N Contents Page PART I: Characteristics and Requirements Description of changes V Forward 1 Clarification statement 1 1 Scope 3 1.1 Dielec

10、tric classification 3 1.2 Mechanical classification 4 1.3 Type designation 5 2 Marking 11 2.1 Leaded, coated devices 11 2.2 Unleaded multilayer capacitors 11 3 Test sequence 15 3.1 3.2 Annex A A. 1 A.2 A.3 Annex B B.l B .2 8.3 Annex C c.1 c .2 c.3 c .4 c .5 Sampling plans Test requirements Other per

11、tinent ANSI documents Scope Document sourcing Pertinent EIA and ANSEIA documents Pertinent U.S. military standards Scope Document sourang Pertinant US. military speaficabon documents Pertinent international standards Scope Document sourcing Pertinent IEC and CECC documents Pertinent EIAJ and JIS doc

12、uments Pertinent IS0 documents 15 16 19 19 19 19 21 21 21 21 23 23 23 25 26 26 I STD-EIA 178-3-E-ENLL 1978 W 3234b00 0589367 TBL W EIA-198-3-E Ceramic Dielectric Capacitors Classes I, II, 111, and iV Contents (continued) Page PART II: Test Methods Description of changes iv Forward Clarification stat

13、ement 1 1 1 Introduction 3 1.1 Scope 1.2 Numbering system 3 3 2 General requirements 4 2.1 Test requirements 2.2 Test conditions 4 4 3 Numerical list of test methods 5 Parametric conformance tests (1 O0 class) Method 1 O1 : Method 102: Quality factor Method 103: Method 104: Insulation resistance Met

14、hod 105: Method 106: High frequency measurements Capacitance and dissipation factor Dielectric or case withstanding voltage Voltage-temperature characteristic of capacitance Environmental Derformance tests (200 class) Method 201 : Method 202: Method 203: Method 204: Method 205: Method 206: Method 20

15、7: Method 208: Method 209: Method 21 O: Life (at elevated ambient temperature) Thermal shock Immersion Moisture resistance Humidity (steady state) Damp heat (steady state) Barometric pressure (reduced) Flammability (external flame) Seal Marking resistance to solvents 7 9 11 15 17 21 23 27 31 33 37 3

16、9 43 45 47 57 EIA-198-3-E Ceramic Dielectric Capacitors Classes I, II, 111, and N Contents (continued) Page PART II: Test Methods - cont. Physical conformance tests (300 Class) Method 301 : Solderability Method 302: Method 303: Terminal strength Method 304: Vibration, high frequency Method 305: Shoc

17、k (specified pulse) Method 306: Method 307 Resistance to soldering heat Destructive physical analysis (DPA) Surface mount thermal shock Annex A A.1 A.2 A.3 A.4 Annex B B.1 B .2 8.3 Annex C c.1 c .2 c.3 c .4 c.5 Other pertinent ANSI documents Scope Document sourcing Pertinent EIA and ANSEIA documents

18、 Pertinent IPC documents Pertinant U.S. military standards Scope Document sourcing Pertinant U.S. military specification documents Pertinent international standards Scope Document sourcing Pertinent IEC and CECC. documents Pertinent EIN and JIS documents Pertinent IS0 documents 59 67 73 79 07 97 99

19、1 o9 1 o9 1 o9 1 o9 111 113 113 113 113 115 115 115 116 117 117 iii EIA-198-3-E Ceramic Dielectric Capacitors . Classes I, II, 111, and IV Contents (concluded) Page Part 111: Individual Specifications Description of changes Forward Clarification statement 1 Individual product specifications 3 Annex

20、A A. 1 A.2 A.3 Annex 6 6.1 8.2 8.3 Annex B B.l 8.2 B.3 6.4 8.5 Section 1 Section 2 Section 3 Section 4 Section 5 Section 6 Section 7 Section 8 Section 9 ther pertinent ANSI documents Scope Document sourcing . Pertinent EIA and ANSEIA documents Pertinent U.S. military standards scope Document sourcin

21、g Pertinent US. military specification documents Other international documents Scope Document sourcing Pertinent IEC and CECC documents Pertinent EIAJ and JIS documents Pertinent IS0 documents Radial-leaded, disc capacitors . Radial-leaded 500 v tubular capacitors Unleaded multilayer chip capacitors

22、 Radial-leaded, conformally coated capacitors Radial-leaded, molded capacitors Axial-leaded, conformally coated capacitors Axial-leaded, glass encapsulated capacitors Two-pin, dual-in-line, encapsulated capacitors High voltage, multilayer capacitors iv 5 5 5 5 9 9 9 9 11 11 11 12 13 13 - - - - - - -

23、 - STDSEIA 298-3-E-ENGL 2998 3234b00 0589370 57b Description of Changes Tlle Page: Modify Part 111 title. Part 111 General: Separate Part 111 into individual revisable Sections by product type equivalent to previous slash-sheets. Add preliminary elements to Part 111 Update individual sections - see

24、changes listed there-in. . EIA-198-3-E Pages Date Title 311 2/97 Al I 311 2/97 1-1 311 U97 - var. EIA-198-3-E I Added annexes A through C containing references to other pertinent specifications EIA-198-3-E EIA-198-3-E F EIA-198-3-E 5-1 3 1 O131 I97 EIA-198-3-E I I I V - - STD-EIA 198-3-E-ENGL 1998 =

25、 3234bUU 0587373 402 m EIA-198-3-E Page 1 Ceramic Dielectric Capacitors Classes I, II, 111 and IV Part 111 Individual Specifications Forward Formulated under the cognizance of the EIA P-2.1 Subcommittee on Ceramic Capacitors and reviewed and approved by the Engineering Department Executive Committee

26、 (EDEC) of the EIA. This EIA Standard is a revision and update of EIA-198-D covering ceramic dielectric capacitors. Revision- E has been modified to contain information on new products, specifically low Vcltage rated and small case size surface mount capacitors. It has also been reorganized into mul

27、tiple distinct sections to facilitate future revisions and has been reformatted following the guidelines of EP-7-8: Style Manual for Standards and Publications of EIA and JEDEC. Detailed changes are listed at the beginning of each section. Clarification Statement The purpose of this clarification st

28、atement is to advise the reader that it is EIA procedure when revising a standard to include all of the outstanding addendums of the standard being superseded in the revision. Accordingly, previously published addendums to EIA-198-8; EIA-198-B-1: EIA-198-B-2; EIA-198-B-3A and EIA-198-C, EIA-198-D ha

29、ve been incorporated into EIA-198-E. STD-EIA 178-3-E-ENLL 1998 3239b00 0587372 3Lt7 R EIA-198-3-E Page 3 Ceramic Dielectric Capacitors Classes I, II, 111 and IV Part 111 Individual Specifications 1 Individual Product Specifications Individual product specifications have been arranged as stand-alone

30、individual paginated sections of Part 111 in order to facilitate revision on a case-by-cace basis. They are listed in the Table of contents and appear attached to Part 111 following the Informative Annexes. Previous page is blank STD-EIA 198-3-E-ENGL 1778 D 323Lib00 0587373 285 m EIA-198-3-E Page 5

31、Ceramic Dielectric Capacitors Classes I, II, 111, and IV Part 111: Individual Specifications Annex A (Informative) Other Pertinent ANSI Standards A.l Scope Prior to printing a review was conducted of current EIA Standards and a list of documents that could have bearing on this standard was assembled

32、. For the purposes of this revision, no attempt was made to review all documents or to reconcile conflicts with EIA-198. A.2 Document Sourcing EIA and ANSIEIA Documents may be purchased from: Global Engineering Documents Phone (USCanada): 800-854-71 79 15 Inverness Way East Phone (Worldwide): 303-79

33、2-21 81 Englewood, Colorado 801 12 USA Fax: 303-397-2740 Inquiries may also be addressed to: Electronic industries Association Phone: 703-907-7500 2500 Wilson Boulevard Fax: 703-907-7501 Arlington, Virginia 22201 -3834 USA Internet: www.eia.org A.3 Pertinent IA and ANSIIEIA Documents Number Title Da

34、te EIA-521 Application Guide for Multilayer Ceramic capacitors - Electrical Nov 1993 PDP-1 O0 Registered and Standard Mechanical Outlines for Electronic Parts Sep 1987 EIA-5400BAA Detail Specification for Decoupling Capacitor Dual In-line Package Sockets for Use in Electronic Equipment Nov 1994 Feb

35、1987 EMS-35 Two-Pin Dual IniLine Capacitors EMS-36 Chip Capacitors, Multi-Layer (Ceramic Dielectric) Jan 1987 Previous gage is blank STD-EIA 198-3-E-ENGL 1998 D 3234b 0589374 111 m EIA-1983-E Page 6 Ceramic Dielectric Capacitors Classes I, II, 111, and N Part 111: Individual Specifications Annex A (

36、Informative) Other Pertinent EIA Standards Number EINS-37 EINS-38 EINS-39 PQC43NS0001 PQC43NS0002 PQC43NS0003 PQ C4 3N SO004 PQC45NS0001 PQC45NS0002 PQC45NS0003 PQC45NS0004 QC300601 NS0001 QC300601NS0002 QC300601 /US0003 QC30O601 /US0004 Title Date Multiple Layer High Voltage Capacitors (Radial Lead

37、 Chip Capacitors) Mar 1987 Radial Lead Capacitors (Conformally Coated) Ceramic Dielectric Axial Capacitors (Glass Encapsulated) Mar 1987 Mar 1987 Detail Specification: Fixed Capacitors of Ceramic Dielectric, Class 16, Molded Case Multilayer Ceramic, Axial Lead“ Dec 1985 Detail Specification: Fixed C

38、apacitors of Ceramic Dielectric, Class 16, Molded Case Multilayer Ceramic, Radial Lead“ Jan 1986 Detail Specification: Fixed Capacitors of Ceramic Dielectric, Class 1 B, Molded Case Multilayer Ceramic, Radial Lead“ Sep 1985 Detail Specification: Fixed Capacitors of Ceramic Dielectric, Class 1 B, Mol

39、ded Case Multilayer Ceramic, Axial Lead“ Sep 1985 Detail Specification: “Fixed Capacitors of Ceramic Dielectric, Class 2x1 , Molded Case Multilayer Ceramic, Axial Leads“ Dec 1985 Detail Specification: Fixed Capacitors of Ceramic Dielectric, Class 2x1, Molded Case Multilayer Ceramic, Radial Leads“ De

40、c 1985 Detail Specification: Fixed Capacitors of Ceramic Dielectric, Class 2x1, Molded Case Multilayer Ceramic, Axial Leads“ Dec 1985 Detail Specification: Fixed Capacitors of Ceramic Dielectric, Class 2x1, Molded Case Multilayer Ceramic, Radial Leads“ Dec 1985 Detail Specification: Fixed Capacitors

41、, Multilayer Ceramic Dielectric, Class 1 B, Conformal Insulated Coating, Axial Leads“ Dec 1987 Detail Specification: Fixed Capacitors, Multilayer Ceramic Dielectric, Class 1 B, Conformal Insulated Coating;Radial Leads“ Detail Specification: Fixed Capacitors, Multilayer Ceramic Dielectric, Class 1 B,

42、 Disk Type, Single Form, Radial Terminations“ Dec 1987 Aug 1988 Detail Specification: “Fixed Capacitors, Multilayer Ceramic Dielectric, Class 1 B, Molded Case Multilayer Ceramic, Axial Leads“ Jul1991 STD.EIA 198-3-E-ENGL 1798 3239b00 0589375 058 m EIA-198-3-E Page 7 Ceramic Dielectric Capacitors Cla

43、sses I, Il, 111, and N Part 111: Individual Specifications Annex A (Informative) Other Pertinent EIA Standards Date Title Number QC30070lRIS0001 Detail Specification: “Fixed Capacitors, Multilayer Ceramic Dielectric, Class 2E4, Conformal Insulated Coating, Mal Leads Jul 1991 Jul1991 QC300701 RIS0002

44、 Detail Specification: “Fixed Capacitors, Multilayer Ceramic Dielectric, Class 2R1, Conformal Insulated Coating, Radial Leads Detail Specification: “Fixed Capacitors, Multilayer Ceramic Dielectric, Class 2R1, Conformal Insulated Coating, Axial Leads QC300701NS0003 Jull991 QC300701 RJS0004 Detail Spe

45、cification: “Fixed Capacitors, Multilayer Ceramic Dielectric, Class 2E4, Conformal Insulated Coating, Radial Leads Jul1991 QC300701 RIS0005 QC300701 /US0006 Detail Specification: Fixed Capacitors, Ceramic Dielectric, Class 2, Disk Type, Single Form, Radial Terminations“ Aug 1988 Detail Specification

46、. Futed capacitors, Ceramic Dielectric, Class 2x1, Molded Case Mulblayer Ceramic, ha1 Leads“ Jul1991 QC301901 RIS0004 Detail Specificabon Fued Muttilayer Ceramic Chip Capacitors for Mounting on Rigid and Non-Rigid Substrates, Subclass 1 B“ Mar 1991 Detail Specificabon Fued Muttilayer Ceramic Chip Ca

47、pacitors, Subclass 1 B. Assessment Issue. Level E“ Mar 1991 Mar 1991 Detail Specificabon. Fued Multilayer Ceramic Chip Capacitors, Subclass 2R1, Assessment Issue. Level E“ QC31 O901 /US0007 Detail Speaficabon Fued Multilayer Ceramic Chip Capacitors, Subclass 2E6. Assessment Issue, Level E“ Mar 1991

48、EIA-296-E Lead Taping of Components in Axial Lead Configuration for Automabc Handling Nov 1989 Mar 1981 EIA-383-A EIA-468-B Preparation for the Delntery of Electrical and Electronic Components Lead Taping of Components in the Radial Configuration for Automated Handling Aug 1994 Feb 1986 EIA-48 1 -A

49、Taping of Surface Mount Components for Automatic Placement STD-EIA 198-3-E-ENGL 1798 M 3234b00 058737b T74 I EIA-198-3-E Page 8 Ceramic Dielectric Capacitors Classes I, II, 111, and N Part 111: Individual Specifications Annex A (Infornative) Other Pertinent EIA Standards Number Title Date EIA-481-1 -A 8 mrn and 12 mm Taping of Surface Mount Components for Automatic Handling Aug 1994 EIA-481-2 16 mm and 24 rnrn Embossed Carrier Taping of Surface Mount Components for Automatic Handling Mar 1991 EIA-541 Packaging Material Standards for ESD Sensitive Items