ECMA 242-2001 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Message Waiting Indication Supplementary Service《专用综合业务网络(PISN) 局间信令协议 消息待取指示补充业务 第4.pdf

1、 Standard ECMA-242 4th Edition - December 2001 Standardizing Information and Communication Systems Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Message Waiting Indication Supplementary Service Phone: +41 22 849.60.00 - Fax: +41 22 849.60.01 - URL: http:/www.ecma.

2、ch - Internet: helpdeskecma.ch . Draft Standard ECMA-242 4th Edition - December 2001 Standardizing Information and Communication Systems Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Message Waiting Indication Supplementary Service (QSIG-MWI) Phone: +41 22 849.60.

3、00 - Fax: +41 22 849.60.01 - URL: http:/www.ecma.ch - Internet: helpdeskecma.ch IW Ecma-242.doc 14-01-02 10,13 . Brief History This Standard is one of a series of ECMA Standards defining services and signalling protocols applicable to Private Integrated Services Networks (PISNs). The series uses ISD

4、N concepts as developed by ITU-T and conforms to the framework of International Standards for Open Systems Interconnection as defined by ISO/IEC. This particular Standard specifies the signalling protocol for use at the Q reference point in support of the Message Waiting Indication supplementary ser

5、vice. The protocol defined in this Standard forms part of the PSS1 protocol (informally known as QSIG). This Standard is based upon the practical experience of ECMA member companies and the results of their active and continuous participation in the work of ISO/IEC JTC1, ITU-T, ETSI and other intern

6、ational and national standardization bodies. It represents a pragmatic and widely based consensus. Compared to the 2nd Edition of Standard ECMA-242 (published by ECMA in September 1997), the 3rd Edition incorporated changes to allow indication of multimedia messages. Compared to the 3rd Edition of S

7、tandard ECMA-242 (published by ECMA in December 1998), this 4th Edition incorporates migration to ASN.1 version 1997 as well as changes in order to achieve complete alignment with International Standard ISO/IEC 15506:2000(E) published by ISO/IEC in March 2000. Adopted as 4th Edition of Standard ECMA

8、-242 by the General Assembly of December 2001. . - i - Table of contents 1 Scope 1 2 Conformance 1 3 References (normative) 1 4 Definitions 2 4.1 External definitions 2 4.2 Other definitions 2 4.2.1 Message Centre PINX 2 4.2.2 Served User 2 4.2.3 Message Centre 2 4.2.4 Message Waiting Indication 2 5

9、 List of acronyms 2 6 Signalling protocol for the support of SS-MWI 3 6.1 SS-MWI description 3 6.2 SS-MWI operational requirements 3 6.2.1 Requirements on a Message Centre PINX 3 6.2.2 Requirements on a Served User PINX 3 6.2.3 Requirements on a Transit PINX 3 6.3 SS-MWI coding requirements 4 6.3.1

10、Operations 4 6.3.2 Information elements 8 6.3.3 Messages 8 6.4 SS-MWI state definitions 8 6.4.1 States at the Message Centre PINX 8 6.4.2 States at the Served User PINX 8 6.5 SS-MWI signalling procedures 8 6.5.1 Actions at the Message Centre PINX 9 6.5.2 Actions at the Served User PINX 10 6.5.3 Acti

11、ons at a Transit PINX 10 6.6 SS-MWI impact of interworking with public ISDNs 10 6.6.1 Incoming Gateway PINX procedures 11 6.6.2 Outgoing Gateway PINX procedures 11 6.7 SS-MWI impact of interworking with non-ISDNs 11 6.8 Protocol interactions between SS-MWI and other supplementary services and ANFs 1

12、1 6.8.1 Interaction with Advice Of Charge (SS-AOC) 11 6.8.2 Interaction with Call Deflection (SS-CD) 11 6.8.3 Interaction with Call Forwarding Unconditional (SS-CFU) 11 6.8.4 Interaction with Call Forwarding Busy (SS-CFB) 11 6.8.5 Interaction with Call Forwarding No Reply (SS-CFNR) 11 6.8.6 Interact

13、ion with Call Interception (ANF-CINT) 11 6.8.7 Interaction with Call Intrusion (SS-CI) 11 - ii - 6.8.8 Interaction with Call Offer (SS-CO) 12 6.8.9 Interaction with Call Transfer (SS-CT) 12 6.8.10 Interaction with Calling Name Identification Presentation (SS-CNIP) 12 6.8.11 Interaction with Connecte

14、d Name Identification Presentation (SS-CONP) 12 6.8.12 Interaction with Completion of Call to Busy Subscriber (SS-CCBS) 12 6.8.13 Interaction with Completion of Call on No Reply (SS-CCNR) 12 6.8.14 Interaction with Do Not Disturb (SS-DND) 12 6.8.15 Interaction with Do Not Disturb Override (SS-DNDO)

15、12 6.8.16 Interaction with Path Replacement (ANF-PR) 12 6.8.17 Interaction with Recall (SS-RE) 12 6.8.18 Interaction with Route Restriction Class (ANF-RRC) 12 6.8.19 Interaction with Authentication of the PISN (SS-WTAN) 12 6.8.20 Interaction with Authentication of a WTM user (SS-WTAT) 12 6.8.21 Inte

16、raction with Wireless Terminal Location Registration (SS-WTLR) 12 6.8.22 Interaction with Wireless Terminal Mobility Incoming Call (SS-WTMI) 12 6.8.23 Interaction with Wireless Terminal Mobility Outgoing Call (SS-WTMO) 12 6.9 SS-MWI parameter values (timers) 12 6.9.1 Timer T1 12 6.9.2 Timer T2 13 An

17、nex A - Protocol Implementation Conformance Statement (PICS) proforma 15 Annex B - Examples of Message Sequences 21 Annex C - Specification and Description Language (SDL) Representation of Procedures 25 Annex D - Imported ASN.1 definitions 31 Annex E - ASN.1 definitions according to ITU-T Recs. X.20

18、8 / X.209 33 1 Scope This Standard specifies the signalling protocol for the support of the Message Waiting Indication supplementary service (SS-MWI) at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together within a Private Integrated Services Network

19、 (PISN). The supplementary service MWI enables a Served User to be sent a Message Waiting Indication and also enables this Message Waiting Indication to be cancelled. The Served User may also be permitted to interrogate the Message Centre for any Message Waiting Indication. The Q reference point is

20、defined in ECMA-133. Service specifications are produced in three stages and according to the method specified in ETS 300 387. This Standard contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ECMA-241. T

21、he signalling protocol for SS-MWI uses certain aspects of the generic procedures for the control of supplementary services specified in ECMA-165. This Standard also specifies additional signalling protocol requirements for the support of interactions at the Q reference point between SS-MWI and other

22、 supplementary services and ANFs. NOTE 1 Additional interactions that have no impact on the signalling protocol at the Q reference point can be found in the relevant stage 1 specifications. This Standard is applicable to PINXs which can interconnect to form a PISN. 2 Conformance In order to conform

23、to this Standard, a PINX shall satisfy the requirements identified in the Protocol Implementation Conformance Statement (PICS) proforma in annex A. Conformance to this Standard includes conforming to those clauses that specify protocol interactions between SS-MWI and other supplementary services and

24、 ANFs for which signalling protocols at the Q reference point are supported in accordance with the stage 3 standards concerned. 3 References (normative) The following standards contain provisions which, through reference in this text, constitute provisions of this Standard. All standards are subject

25、 to revision, and parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. In the case of references to ECMA Standards that are aligned with ISO/IEC International Standards, the number of the app

26、ropriate ISO/IEC International Standard is given in brackets after the ECMA reference. ECMA-133 Private Integrated Services Network (PISN) - Reference Configuration for PISN Exchanges (PINX) (International Standard ISO/IEC 11579-1) ECMA-165 Private Integrated Services Network (PISN) - Generic Functi

27、onal Protocol for the Support of Supplementary Services - Inter-Exchange Signalling Procedures and Protocol (International Standard ISO/IEC 11582) ECMA-174 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Call Diversion Supplementary Services (International Standard

28、ISO/IEC 13873) ECMA-241 Private Integrated Services Network (PISN) - Specification, Functional Model and Information Flows - Message Waiting Indication Supplementary Service (International Standard ISO/IEC 15505) ISO/IEC 8601 Data elements and interchange formats - Information interchange - Represen

29、tation of date and times - 2 - ETS 300 387 Private Telecommunication Network (PTN); Method for the specification of basic and supplementary services (1994) ITU-T Rec. I.112 Vocabulary of terms for ISDNs (1993) ITU-T Rec. I.210 Principles of telecommunication services supported by an ISDN and the mea

30、ns to describe them (1993) ITU-T Rec. Q.950 Supplementary services protocols, structure and general principles (2000) ITU-T Rec. Z.100 Specification and description language (1999) 4 Definitions For the purposes of this Standard, the following definitions apply: 4.1 External definitions This Standar

31、d uses the following terms defined in other documents: Application Protocol Data Unit (APDU) (ECMA-165) Call-Independent (ECMA-165) Gateway PINX (ECMA-165) Originating PINX (ECMA-165) Private Integrated Services Network (PISN) (ECMA-133) Private Integrated services Network eXchange (PINX) (ECMA-133)

32、 Signalling (ITU-T Rec. I.112) Supplementary Service (ITU-T Rec. I.210) Supplementary Service Control Entity (ECMA-165) Terminating PINX (ECMA-165) Transit PINX (ECMA-165) 4.2 Other definitions 4.2.1 Message Centre PINX The PINX serving the Message Centre entity for activation, deactivation. 4.2.2 S

33、erved User The user to whom the Message Waiting Indication is sent on initiative of the Message Centre. 4.2.3 Message Centre The entity which activates or deactivates the Message Waiting Indication as a result of storage or retrieval of messages. 4.2.4 Message Waiting Indication An indication to the

34、 Served User when messages are waiting for the Served User. NOTE The indication may be a lamp, special tone, display etc. This is outside the scope of this Standard. 5 List of acronyms ANF Additional Network Feature APDU Application Protocol Data Unit ASN.1 Abstract Syntax Notation no. 1 ISDN Integr

35、ated Services Digital Network - 3 - MWI Message Waiting Indication NFE Network Facility Extension PICS Protocol Implementation Conformance Statement PINX Private Integrated services Network eXchange PISN Private Integrated Services Network SDL Specification and Description Language SS Supplementary

36、Service 6 Signalling protocol for the support of SS-MWI 6.1 SS-MWI description SS-MWI enables a Served User to be sent a Message Waiting Indication and also enables this Message Waiting Indication to be cancelled. This service also includes an option to interrogate the Message Waiting Indication sto

37、red against the Served User. 6.2 SS-MWI operational requirements 6.2.1 Requirements on a Message Centre PINX Generic procedures for the call-independent control (connection-oriented) of supplementary services, as specified in ECMA-165 for an Originating PINX and for a Terminating PINX, shall apply.

38、6.2.2 Requirements on a Served User PINX Generic procedures for the call-independent control (connection-oriented) of supplementary services, as specified in ECMA-165 for a Terminating PINX and for an Originating PINX, shall apply. 6.2.3 Requirements on a Transit PINX Generic procedures for the call

39、-independent control (connection-oriented) of supplementary services, as specified in ECMA-165 for a Transit PINX, shall apply. - 4 - 6.3 SS-MWI coding requirements 6.3.1 Operations The operations defined in Abstract Syntax Notation number 1 (ASN.1) in table 1 shall apply. The notation is in accorda

40、nce with ITU-T Rec. X.680 and X.690. The ITU-T Rec. X.208 and X.209 superseded version is in annex E. Table 1 - Operations in support of SS-MWI MWI-Operations-asn1-97 iso (1) standard (0) pss1-message-waiting-indication (15506) message-waiting-operations-asn1-97 (1) DEFINITIONS EXPLICIT TAGS := BEGI

41、N IMPORTS OPERATION, ERROR FROM Remote-Operations-Information-Objects joint-iso-itu-t (2) remote-operations (4) informationObjects (5) version1 (0) EXTENSION, Extension FROM Manufacturer-specific-service-extension-class-asn1-97 iso (1) standard (0) pss1-generic-procedures (11582) msi-class-asn1-97 (

42、11) basicServiceNotProvided, notActivated, userNotSubscribed, invalidServedUserNr FROM General-Error-List ccitt recommendation q 950 general-error-list (1) PartyNumber FROM Addressing-Data-Elements-asn1-97 iso (1) standard (0) pss1-generic-procedures (11582) addressing-data-elements-asn1-97 (20) ; M

43、WI-Operations OPERATION := mWIActivate | mWIDeactivate | mWIInterrogate mWIActivate OPERATION := ARGUMENT MWIActivateArg RESULT DummyRes ERRORS userNotSubscribed | invalidServedUserNr | basicServiceNotProvided | unspecified CODE local: 80 - 5 - Table 1 - Operations in support of SS-MWI (continued) m

44、WIDeactivate OPERATION := ARGUMENT MWIDeactivateArg RESULT DummyRes ERRORS userNotSubscribed | invalidServedUserNr | basicServiceNotProvided | unspecified CODE local: 81 mWIInterrogate OPERATION := ARGUMENT MWIInterrogateArg RESULT MWIInterrogateRes ERRORS userNotSubscribed | invalidServedUserNr | n

45、otActivated | invalidMsgCentreId | unspecified CODE local: 82 MWIActivateArg := SEQUENCE servedUserNr PartyNumber, basicService BasicService, msgCentreId MsgCentreId OPTIONAL, nbOfMessages 3 IMPLICIT NbOfMessages OPTIONAL, originatingNr 4 PartyNumber OPTIONAL, timestamp TimeStamp OPTIONAL, priority

46、5 IMPLICIT INTEGER (09) OPTIONAL, - The value 0 means the highest priority and 9 the lowest argumentExt CHOICE extension 6 IMPLICIT ExtensionMWIExtSet, multipleExtension 7 IMPLICIT SEQUENCE OF ExtensionMWIExtSet OPTIONAL DummyRes := CHOICE null NULL, extension 1 IMPLICIT ExtensionMWIExtSet, multiple

47、Extension 2 IMPLICIT SEQUENCE OF ExtensionMWIExtSet MWIDeactivateArg := SEQUENCE servedUserNr PartyNumber, basicService BasicService, msgCentreId MsgCentreId OPTIONAL, argumentExt CHOICE extension 3 IMPLICIT ExtensionMWIExtSet, multipleExtension 4 IMPLICIT SEQUENCE OF ExtensionMWIExtSet OPTIONAL - 6

48、 - Table 1 - Operations in support of SS-MWI (continued) MWIInterrogateArg := SEQUENCE servedUserNr PartyNumber, basicService BasicService, msgCentreId MsgCentreId OPTIONAL, argumentExt CHOICE extension 3 IMPLICIT ExtensionMWIExtSet, multipleExtension 4 IMPLICIT SEQUENCE OF ExtensionMWIExtSet OPTION

49、AL MWIInterrogateRes := SEQUENCE SIZE(110) OF MWIInterrogateResElt MWIInterrogateResElt := SEQUENCE basicService BasicService, msgCentreId MsgCentreId OPTIONAL, nbOfMessages 3 IMPLICIT NbOfMessages OPTIONAL, originatingNr 4 PartyNumber OPTIONAL, timestamp TimeStamp OPTIONAL, priority 5 IMPLICIT INTEGER (09) OPTIONAL, - The value 0 means the highest priority and 9 the lowest argumentExt CHOICE extension 6 IMPLICIT