1、 Standard ECMA-251 3rd Edition - December 2001 Standardizing Information and Communication Systems Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Common Information Additional Network Feature Phone: +41 22 849.60.00 - Fax: +41 22 849.60.01 - URL: http:/www.ecma.ch
2、- Internet: helpdeskecma.ch . Standard ECMA-251 3rd Edition - December 2001 Standardizing Information and Communication Systems Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Common Information Additional Network Feature (QSIG-CMN) Phone: +41 22 849.60.00 - Fax: +4
3、1 22 849.60.01 - URL: http:/www.ecma.ch - Internet: helpdeskecma.ch IW Ecma-251.doc 14-01-02 10,15 . Brief History This Standard is one of a series of ECMA standards defining services and signalling protocols applicable to Private Integrated Services Networks. The series uses ISDN concepts as develo
4、ped by ITU-T and conforms to the framework of standards for Open Systems Interconnection as defined by ISO/IEC. This particular Standard specifies the signalling protocol for use at the Q reference point in support of the Common Information additional network feature. The Standard is based upon the
5、practical experience of ECMA member companies and the results of their active and continuous participation in the work of ISO/IEC JTC1, ITU-T, ETSI and other international and national standardization bodies. It represents a pragmatic and widely based consensus. Compared to the 1st Edition of Standa
6、rd ECMA-251 (published by ECMA in December 1996), the 2nd Edition incorporated changes to achieve complete alignment with International Standard ISO/IEC 15772:1998(E) published by ISO/IEC in November 1998. Compared to the 2nd Edition of Standard ECMA-251 (published by ECMA in December 1998), this 3r
7、d Edition incorporates migration to ASN.1 version 1997. Adopted as 3rd Edition of Standard ECMA-251 by the General Assembly of December 2001. - i - Table of contents 1 Scope 1 2 Conformance 1 3 References (normative) 1 4 Definitions 2 4.1 External definitions 2 5 List of acronyms 2 6 Signalling prot
8、ocol for the support of ANF-CMN 3 6.1 ANF-CMN description 3 6.2 ANF-CMN operational requirements 3 6.2.1 Requirements on an Originating PINX 3 6.2.2 Requirements on a Terminating PINX 3 6.2.3 Requirements on a Transit PINX 3 6.3 ANF-CMN coding requirements 4 6.3.1 Operations 4 6.3.2 Notifications 7
9、6.3.3 Information elements 7 6.3.4 Messages 7 6.4 ANF-CMN State definitions 7 6.4.1 States at the Originating PINX 7 6.4.2 States at the Terminating PINX 7 6.5 ANF-CMN Signalling procedures for activation, deactivation and registration 7 6.6 ANF-CMN Signalling procedures for invocation and operation
10、 7 6.6.1 Actions at the Originating PINX 7 6.6.2 Actions at the Terminating PINX 9 6.6.3 Actions at a Transit PINX 10 6.7 ANF-CMN Impact of interworking with public ISDNs 10 6.8 ANF-CMN Impact of interworking with non-ISDNs 10 6.9 Protocol interactions between ANF-CMN and other supplementary service
11、s and ANFs 10 6.9.1 Interactions with Calling Name Identification Presentation (CNIP) 10 6.9.2 Interactions with Connected Name Identification Presentation (CONP) 10 6.9.3 Interactions with Call Forwarding Unconditional (CFU) 10 6.9.4 Interactions with Call Forwarding Busy (CFB) 10 6.9.5 Interaction
12、s with Call Forwarding No Reply (CFNR) 10 6.9.6 Interactions with Call Deflection (CD) 11 6.9.7 Interactions with Call Transfer (CT) 11 6.9.8 Interactions with Completion of Call on Busy Subscriber (CCBS) 11 6.9.9 Interactions with Completion of Call on No Reply (CCNR) 11 6.9.10 Interactions with Ca
13、ll Intrusion (CI) 11 - ii - 6.9.11 Interactions with Call Offer (CO) 11 6.9.12 Interactions with Do Not Disturb (DND) 11 6.9.13 Interactions with Do Not Disturb Override (DNDO) 11 6.9.14 Interactions with Call Interception (CINT) 11 6.9.15 Interactions with Advice Of Charge (AOC) 11 6.9.16 Interacti
14、ons with Message Waiting Indication (MWI) 11 6.9.17 Interactions with Path Replacement (PR) 11 6.9.18 Interactions with Recall (RE) 12 6.9.19 Interactions with Wireless Terminal Mobility, Outgoing call (WTMO) 12 6.9.20 Interactions with Wireless Terminal Mobility, Incoming call (WTMI) 12 6.9.21 Inte
15、ractions with Wireless Terminal, Location Registration (WTLR) 12 6.9.22 Interactions with Wireless Terminal, Authentication (WTAN, WTAT) 12 6.9.23 Interactions with Transit Counter (TC) 12 6.10 ANF-CMN Parameter values (timers) 12 Annex A - Protocol Implementation Conformance Statement (PICS) profor
16、ma 13 Annex B - Examples of message sequences 21 Annex C - Specification and Description Language (SDL) representation of procedures 25 Annex D - ASN.1 definitions according to ITU-T Recs. X.208 / X.209 29 1 Scope This Standard specifies the signalling protocol for the support of the Common Informat
17、ion additional network feature (ANF-CMN) at the Q reference point between Private Integrated services Network eXchanges (PINX) connected together within a Private Integrated Services Network (PISN). ANF-CMN is an additional network feature which enables the exchange of Common Information between ent
18、ities acting on behalf of the two ends of a connection through a PISN. This Common Information is a collection of miscellaneous information that relates to the user or equipment at one end of a connection and includes one or more of the following: Feature Identifiers, Party Category, Equipment Ident
19、ity. This information, when received by an entity, can be used for any purpose, e.g. as the basis for indications to the local user or to another network or in order to filter feature requests. The Q reference point is defined in ECMA-133. Additional network feature specifications are produced in th
20、ree stages and according to the method described in ETS 300 387. This Standard contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ECMA-250. The signalling protocol for ANF-CMN operates on top of the sign
21、alling protocol for basic circuit switched call control, as specified in ECMA-143, and uses certain aspects of the generic procedures for the control of supplementary services specified in ECMA-165. This Standard also specifies additional signalling protocol requirements for the support of interacti
22、ons at the Q reference point between ANF-CMN and other supplementary services and ANFs. NOTE 1 Additional interactions that have no impact on the signalling protocol at the Q reference point can be found in the relevant stage 1 specifications. This Standard is applicable to PINXs which can interconn
23、ect to form a PISN. 2 Conformance In order to conform to this Standard, a PINX shall satisfy the requirements identified in the Protocol Implementation Conformance Statement (PICS) proforma in annex A. Conformance to this Standard includes conforming to those clauses that specify protocol interactio
24、ns between ANF-CMN and other supplementary services and ANFs for which signalling protocols at the Q reference point are supported in accordance with the stage 3 standards concerned. 3 References (normative) The following standards contain provisions which, through reference in this text, constitute
25、 provision of this Standard. All standards are subject to revision, and parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. In the case of references to ECMA Standards that are aligned with
26、ISO/IEC International Standards, the number of the appropriate ISO/IEC International Standard is given in brackets after the ECMA reference. ECMA-133 Private Integrated Services Network (PISN) - Reference Configuration for PISN Exchanges (PINX) (International Standard ISO/IEC 11579-1) ECMA-143 Priva
27、te Integrated Services Network (PISN) - Circuit mode bearer services - Inter-exchange signalling procedures and protocol (International Standard ISO/IEC 11572) ECMA-165 Private Integrated Services Network (PISN) - Generic functional protocol for the support of supplementary services - Inter-exchange
28、 signalling procedures and protocol (International Standard ISO/IEC 11582) ECMA-174 Private Integrated Services Network (PISN) - Inter-exchange signalling protocol - Call diversion supplementary services (International Standard ISO/IEC 13873) - 2 - ECMA-221 Private Integrated Services Network (PISN)
29、 - Inter-Exchange Signalling Protocol - Call Interception Supplementary Service (International Standard ISO/IEC 15054) ECMA-250 Private Integrated Services Network (PISN) - Specification, Functional Model and Information Flows - Common Information Additional Network Feature (International Standard I
30、SO/IEC 15771) ECMA-304 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Wireless Terminal Call Handling Additional Network Features (International Standard ISO/IEC 15431) ETS 300 387 Private Telecommunication Network (PTN); Method for the specification of basic and s
31、upplementary services (1994) ITU-T Rec. I.112 Vocabulary of terms for ISDNs (1993) ITU-T Rec. I.210 Principles of telecommunication services supported by an ISDN and the means to describe them (1993) ITU-T Rec. Q.950 Supplementary services protocols, structure and general principles (2000) ITU-T Rec
32、. Z.100 Specification and description language (1999) 4 Definitions For the purpose of this Standard the following definitions apply. 4.1 External definitions This Standard uses the following terms defined in other documents: ANF-CMN user (ECMA-250) Application Protocol Data Unit (APDU) (ECMA-165) B
33、ackward direction (ECMA-250) Basic Service (ITU-T Rec. I.210) Call, Basic Call (ECMA-165) Equipment Identity (ECMA-250) Feature Identifier (ECMA-250) Forward direction (ECMA-250) Originating PINX (ECMA-143) Party Category (ECMA-250) Private Integrated Services Network (PISN) (ECMA-133) Private Integ
34、rated services Network eXchange (PINX) (ECMA-133) Signalling (ITU-T Rec. I.112) Supplementary Service (ITU-T Rec. I.210) Supplementary Service Control Entity (ECMA-165) Terminating PINX (ECMA-143) Transit PINX (ECMA-143) 5 List of acronyms ANF Additional Network Feature ANF-CMN Additional Network Fe
35、ature Common Information - 3 - APDU Application Protocol Data Unit ASN.1 Abstract Syntax Notation no.1 ISDN Integrated Services Digital Network NFE Network Facility Extension PICS Protocol Implementation Conformance Statement PINX Private Integrated services Network eXchange PISN Private Integrated
36、Services Network SDL Specification and Description Language SS Supplementary Service 6 Signalling protocol for the support of ANF-CMN 6.1 ANF-CMN description ANF-CMN is an additional network feature which enables the exchange of Common Information between ANF-CMN users acting on behalf of the two en
37、ds of a connection through a PISN. This Common Information is a collection of miscellaneous information that relates to the user or equipment at one end of a connection and includes one or more of the following: Feature Identifiers, Party Category, Equipment Identity. This information, when received
38、 by an ANF-CMN user, can be used for any purpose, e.g. as the basis for indications to the local user or to another network or in order to filter feature requests. A solicited and an unsolicited service is offered to an ANF-CMN user. The solicited service enables the ANF-CMN user to request the Comm
39、on Information from a remote ANF-CMN user. The unsolicited service supplies the Common Information to an ANF-CMN user. These services may be combined and are not mutually exclusive. The Common Information contains the SS/ANF-identifiers supported by the ANF-CMN user and available for the particular
40、call, the possible options and - if applicable - details of the SS/ANF. Additionally, equipment identity and party category are contained. 6.2 ANF-CMN operational requirements 6.2.1 Requirements on an Originating PINX Call establishment procedures for the outgoing side of an inter-PINX link and call
41、 release procedures, as specified in ECMA-143, shall apply. Generic procedures for the call-related control of supplementary services, as specified in ECMA-165 for an End PINX, shall apply. 6.2.2 Requirements on a Terminating PINX Call establishment procedures for the incoming side of an inter-PINX
42、link and call release procedures, as specified in ECMA-143, shall apply. Generic procedures for the call-related control of supplementary services, as specified in ECMA-165 for an End PINX, shall apply. 6.2.3 Requirements on a Transit PINX Basic call procedures as specified in ECMA-143 for a Transit
43、 PINX shall apply. Generic procedures for the call-related control of supplementary services, as specified in ECMA-165 for a Transit PINX, shall apply. - 4 - 6.3 ANF-CMN coding requirements 6.3.1 Operations The operations defined in Abstract Syntax Notation number 1 (ASN.1) in table 1 shall apply. T
44、he notation is in accordance with ITU-T Rec. X.680 and X.690. The ITU-T Rec. X.208 and X.209 superseded version is in annex D. Table 1 - Operations in Support of ANF-CMN Common-Information-Operations-asn1-97 iso (1) standard (0) pss1-common-information (15772) operations-asn1-97 (1) DEFINITIONS EXPL
45、ICIT TAGS := BEGIN IMPORTS OPERATION, ERROR FROM Remote-Operations-Information-Objects joint-iso-itu-t (2) remote-operations (4) informationObjects (5) version1 (0) EXTENSION, Extension FROM Manufacturer-specific-service-extension-class-asn1-97 iso (1) standard (0) pss1-generic-procedures (11582) ms
46、i-class-asn1-97 (11); CMN-Operations OPERATION := cmnRequest | cmnInform cmnRequest OPERATION := ARGUMENT DummyArg RESULT CmnArg ALWAYS RESPONDS FALSE CODE local: 84 cmnInform OPERATION := ARGUMENT CmnArg RETURN RESULT FALSE ALWAYS RESPONDS FALSE CODE local: 85 CmnArg := SEQUENCE featureIdentifier 2
47、 IMPLICIT FeatureIdList OPTIONAL, ssDNDOprotectionLevel 3 IMPLICIT INTEGER (03) OPTIONAL, - Supplementary Service Do Not Disturb Override Protection level, - meaningful only in backward direction; inclusion indicates - support of SS-DNDO as well as the applicable protection level. ssCIprotectionLeve
48、l 4 IMPLICIT INTEGER (03) OPTIONAL, - Supplementary Service Call Intrusion Protection level, - meaningful both in forward inclusion indicates support - of SS-CI as an Unwanted user PINX (forward direction) or as a Terminating - PINX (backward direction), as well as the applicable protection level. e
49、quipmentIdentity 5 IMPLICIT EquipmentId OPTIONAL, partyCategory 6 IMPLICIT PartyCategory OPTIONAL, extension CHOICE single 7 IMPLICIT ExtensionCMNExtSet, multiple 8 IMPLICIT SEQUENCE OF ExtensionCMNExtSet OPTIONAL - 5 - Table 1 - Operations in Support of ANF-CMN (continued) DummyArg := CHOICE null NULL, single 1 IMPLICIT ExtensionCMNExtSet, multiple 2 IMPLICIT SEQUENCE OF ExtensionCMNExtSet FeatureIdList := BIT STRING - bit set to ONE means the corresponding feature - i
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1