ECMA 347-2003 Private Integrated Services Network (PISN) Inter-Exchange Signalling Protocol Message Centre Monitoring and Mailbox Identification Supplementary Services《专用综合业务网络(PIS.pdf

1、 Standard ECMA-347 International June 2003 Standardizing Information and Communication Systems Private Integrated Services Network (PISN) Inter-Exchange Signalling Protocol Message Centre Monitoring and Mailbox Identification Supplementary Services Phone/Fax: +41 22 849.60.00/01 - http:/www.ecma-int

2、ernational.org - mailto: helpdeskecma.ch . Standard ECMA-347 International June 2003 Standardizing Information and Communication Systems Private Integrated Services Network (PISN) Inter-Exchange Signalling Protocol Message Centre Monitoring and Mailbox Identification Supplementary Services (QSIG-MCM

3、 / QSIG-MID) Phone/Fax: +41 22 849.60.00/01 - http:/www.ecma-international.org - mailto: helpdeskecma.ch IW Ecma-347.doc 10-07-03 14,52 . Brief History This Standard is one of a series of ECMA Standards defining services and signalling protocols applicable to Private Integrated Services Networks (PI

4、SNs). The series uses ISDN concepts as developed by ITU-T and conforms to the framework of International Standards for Open Systems Interconnection as defined by ISO/IEC. It has been produced under ETSI work item DTS/ECMA-00230. This particular Standard specifies the signalling protocol for use at t

5、he Q reference point in support of the Message Centre Monitoring supplementary service as well as the Mailbox Identification supplementary service. The protocol defined in this Standard forms part of the PSS1 protocol (informally known as QSIG). SS-MCM is based on SS-MWI and includes its entire func

6、tionality. The interoperability with SS-MWI is therefore guaranteed. Compared to SS-MWI, SS-MCM offers an enhanced functionality for monitoring status changes of messages stored in the Served Users Mailbox as follows: individual activation and deactivation for the monitoring of messages of different

7、 Message Type(s) within the Mailbox as well as interrogation of the actual SS-MCM configuration; retrieval of information about all messages (i.e. new and retrieved messages) in the mailbox independent of the Message Status; request of detailed updated information about messages stored in the mailbo

8、x. This Standard is based upon the practical experience of ECMA member companies and the results of their active and continuous participation in the work of ISO/IEC JTC1, ITU-T, ETSI and other international and national standardization bodies. It represents a pragmatic and widely based consensus. Th

9、is ECMA Standard has been adopted by the General Assembly of June 2003. - i - Table of contents 1 Scope 1 2 Conformance 1 3 References (normative) 1 4 Definitions 2 4.1 External definitions 2 4.2 Other definitions 3 4.2.1 Message Centre PINX 3 4.2.2 Served User PINX 3 5 List of acronyms 3 6 Signalli

10、ng protocol for the support of SS-MCM 3 6.1 SS-MCM description 3 6.2 SS-MCM operational requirements 3 6.2.1 Requirements on a Message Centre PINX 3 6.2.2 Requirements on a Served User PINX 4 6.2.3 Requirements on a Transit PINX 4 6.3 SS-MCM coding requirements 4 6.3.1 Operations 4 6.3.2 Information

11、 elements 11 6.3.3 Messages 11 6.4 SS-MCM state definitions 11 6.4.1 States at the Message Centre PINX 11 6.4.2 States at the Served User PINX 12 6.5 SS-MCM signalling procedures 12 6.5.1 Actions at the Message Centre PINX 12 6.5.2 Actions at the Served User PINX 16 6.5.3 Actions at a Transit PINX 1

12、8 6.6 SS-MCM impact of interworking with public ISDNs 18 6.7 SS-MCM impact of interworking with non-ISDNs 18 6.8 Protocol interactions between SS-MCM and other supplementary services and ANFs 18 6.8.1 Calling Line Identification Presentation (SS-CLIP) 19 6.8.2 Connected Line Identification Presentat

13、ion (SS-COLP) 19 6.8.3 Calling/Connected Line Identification Restriction (SS-CLIR) 19 6.8.4 Calling Name Identification Presentation (SS-CNIP) 19 6.8.5 Calling/Connected Name Identification Restriction (SS-CNIR) 19 6.8.6 Connected Name Identification Presentation (SS-CONP) 19 6.8.7 Call Forwarding U

14、nconditional (SS-CFU) 19 6.8.8 Call Forwarding Busy (SS-CFB) 19 6.8.9 Call Forwarding No Reply (SS-CFNR) 19 - ii - 6.8.10 Path Replacement (ANF-PR) 19 6.8.11 Call Transfer (SS-CT) 19 6.8.12 Call Deflection (SS-CD) 19 6.8.13 Completion of Calls to Busy Subscribers (SS-CCBS) 19 6.8.14 Completion of Ca

15、lls on No Reply (SS-CCNR) 19 6.8.15 Call Offer (SS-CO) 19 6.8.16 Do Not Disturb (SS-DND) 19 6.8.17 Do Not Disturb Override (SS-DNDO) 19 6.8.18 Call Intrusion (SS-CI) 19 6.8.19 Advice of Charge (SS-AOC) 19 6.8.20 Recall (SS-RE) 20 6.8.21 Call Interception (SS-CINT) 20 6.8.22 Transit Counter (ANF-TC)

16、20 6.8.23 Route Restriction Class (ANF-RRC) 20 6.8.24 Message Waiting Indication (SS-MWI) 20 6.8.25 Wireless Terminal Location Registration (SS-WTLR) 20 6.8.26 Wireless Terminal Incoming Call (SS-WTMI) 20 6.8.27 Wireless Terminal Outgoing Call (SS-WTMO) 20 6.8.28 Wireless Terminal Authentication of

17、a WTM User (SS-WTAT) 20 6.8.29 Wireless Terminal Authentication of the PISN (SS-WTAN) 20 6.8.30 Common Information (SS-CMN) 20 6.8.31 Call Priority Interruption (Protection) (SS-CPI(P) 20 6.8.32 Private User Mobility Incoming Call (ANF-PUMI) 20 6.8.33 Private User Mobility Outgoing Call (ANF-PUMO) 2

18、0 6.8.34 Private User Mobility Registration (SS-PUMR) 20 6.8.35 Single Step Call Transfer (SS-SSCT) 20 6.8.36 Simple Dialog (SS-SD) 20 6.8.37 Call Identification and Call Linkage (ANF-CIDL) 20 6.8.38 Short Message Service (SS-SMS) 21 6.8.39 Make Call Request (SS-MCR) 21 6.8.40 Mailbox Identification

19、 (SS-MID) 21 6.9 SS-MCM parameter values (timers) 21 6.9.1 Timer T1 21 6.9.2 Timer T2 21 6.9.3 Timer T3 21 7 Signalling protocol for the support of SS-MID 22 7.1 SS-MID description 22 7.2 SS-MID operational requirements 22 7.2.1 Requirements on a Message Centre PINX 22 7.2.2 Requirements on a Served

20、 User PINX 22 7.2.3 Requirements on a Transit PINX 22 7.3 SS-MID coding requirements 23 7.3.1 Operations 23 7.3.2 Information elements 25 7.3.3 Messages 25 - iii - 7.4 SS-MID state definitions 25 7.4.1 States at the Message Centre PINX 25 7.4.2 States at the Served User PINX 25 7.5 SS-MID signalling

21、 procedures 25 7.5.1 Actions at the Message Centre PINX 25 7.5.2 Actions at the Served User PINX 26 7.5.3 Actions at a Transit PINX 27 7.6 SS-MID impact of interworking with public ISDNs 27 7.7 SS-MID impact of interworking with non-ISDNs 27 7.8 Protocol interactions between SS-MID and other supplem

22、entary services and ANFs 27 7.8.1 Calling Line Identification Presentation (SS-CLIP) 28 7.8.2 Connected Line Identification Presentation (SS-COLP) 28 7.8.3 Calling/Connected Line Identification Restriction (SS-CLIR) 28 7.8.4 Calling Name Identification Presentation (SS-CNIP) 28 7.8.5 Calling/Connect

23、ed Name Identification Restriction (SS-CNIR) 28 7.8.6 Connected Name Identification Presentation (SS-CONP) 28 7.8.7 Call Forwarding Unconditional (SS-CFU) 28 7.8.8 Call Forwarding Busy (SS-CFB) 28 7.8.9 Call Forwarding No Reply (SS-CFNR) 28 7.8.10 Path Replacement (ANF-PR) 28 7.8.11 Call Transfer (S

24、S-CT) 28 7.8.12 Call Deflection (SS-CD) 28 7.8.13 Completion of Calls to Busy Subscribers (SS-CCBS) 28 7.8.14 Completion of Calls on No Reply (SS-CCNR) 28 7.8.15 Call Offer (SS-CO) 28 7.8.16 Do Not Disturb (SS-DND) 28 7.8.17 Do Not Disturb Override (SS-DNDO) 28 7.8.18 Call Intrusion (SS-CI) 28 7.8.1

25、9 Advice of Charge (SS-AOC) 28 7.8.20 Recall (SS-RE) 29 7.8.21 Call Interception (SS-CINT) 29 7.8.22 Transit Counter (ANF-TC) 29 7.8.23 Route Restriction Class (ANF-RRC) 29 7.8.24 Message Waiting Indication (SS-MWI) 29 7.8.25 Wireless Terminal Location Registration (SS-WTLR) 29 7.8.26 Wireless Termi

26、nal Incoming Call (SS-WTMI) 29 7.8.27 Wireless Terminal Outgoing Call (SS-WTMO) 29 7.8.28 Wireless Terminal Authentication of a WTM User (SS-WTAT) 29 7.8.29 Wireless Terminal Authentication of the PISN (SS-WTAN) 29 7.8.30 Common Information (SS-CMN) 29 7.8.31 Call Priority Interruption (Protection)

27、(SS-CPI(P) 29 7.8.32 Private User Mobility Incoming Call (ANF-PUMI) 29 7.8.33 Private User Mobility Outgoing Call (ANF-PUMO) 29 7.8.34 Private User Mobility Registration (SS-PUMR) 29 7.8.35 Single Step Call Transfer (SS-SSCT) 29 7.8.36 Simple Dialog (SS-SD) 29 - iv - 7.8.37 Call Identification and C

28、all Linkage (ANF-CIDL) 29 7.8.38 Short Message Service (SS-SMS) 29 7.8.39 Make Call Request (SS-MCR) 29 7.8.40 Message Centre Monitoring (SS-MCM) 30 7.9 SS-MID parameter values (timers) 30 7.9.1 Timer T1 30 7.9.2 Timer T2 30 Annex A - Protocol Implementation Conformance Statement (PICS) Proforma 31

29、Annex B - Examples of Message Sequences 41 Annex C - Specification and Description Language (SDL) Representation of Procedures 61 Annex D - List of Message Types 81 1 Scope This Standard specifies the signalling protocol for the support of the Message Centre Monitoring supplementary service (SS-MCM)

30、 as well as the Mailbox Identification supplementary service (SS-MID) at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together within a Private Integrated Services Network (PISN). The supplementary service MCM enables a Served User to get informed by

31、a Message Centre about the status and status changes of messages stored in that Served Users Mailbox. The supplementary service MID enables a Message Centre to identify a specific mailbox of a Served User in case the Served User has more than one mailbox within the Message Centre. In addition SS-MID

32、 enables a Served User to authenticate himself/herself at a specific mailbox located within the Messages Centre. The Q reference point is defined in ECMA-133. Service specifications are produced in three stages and according to the method specified in ETS 300 387. This Standard contains the stage 3

33、specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ECMA-346. The signalling protocol for SS-MCM and SS-MID uses certain aspects of the generic procedures for the control of supplementary services specified in ECMA-165. This

34、Standard also specifies additional signalling protocol requirements for the support of interactions at the Q reference point between SS-MCM as well as SS-MID and other supplementary services and ANFs. NOTE Additional interactions that have no impact on the signalling protocol at the Q reference poin

35、t can be found in the relevant stage 1 specifications. 2 Conformance In order to conform to this Standard, a PINX shall satisfy the requirements identified in the Protocol Implementation Conformance Statement (PICS) proforma in annex A. Conformance to this Standard includes conforming to those claus

36、es that specify protocol interactions between SS-MCM as well as SS-MID and other supplementary services and ANFs for which signalling protocols at the Q reference point are supported in accordance with the stage 3 standards concerned. 3 References (normative) The following standards contain provisio

37、ns which, through reference in this text, constitute provisions of this Standard. All standards are subject to revision, and parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. In the case o

38、f references to ECMA Standards that are aligned with ISO/IEC International Standards, the number of the appropriate ISO/IEC International Standard is given in brackets after the ECMA reference. ECMA-133 Private Integrated Services Network (PISN) Reference Configuration for PISN Exchanges (PINX) (Int

39、ernational Standard ISO/IEC 11579-1) ECMA-142 Private Integrated Services Network (PISN) Circuit Mode 64kbit/s Bearer Services Service Description, Functional Capabilities and Information Flows (International Standard ISO/IEC 11574) ECMA-143 Private Integrated Services Network (PISN) Circuit Mode Be

40、arer Services Inter-Exchange Signalling Procedures and Protocol (International Standard ISO/IEC 11572) ECMA-165 Private Integrated Services Network (PISN) Generic Functional Protocol for the Support of Supplementary Services Inter-Exchange Signalling Procedures and Protocol (International Standard I

41、SO/IEC 11582) - 2 - ECMA-174 Private Integrated Services Network (PISN) Inter-Exchange Signalling Protocol Call Diversion Supplementary Services (International Standard ISO/IEC 13873) ECMA-241 Private Integrated Services Network (PISN) Specification, Functional Model and Information Flows Message Wa

42、iting Indication Supplementary Service (International Standard ISO/IEC 15505) ECMA-242 Private Integrated Services Network (PISN) Inter-Exchange Signalling Protocol Message Waiting Indication Supplementary Service (International Standard ISO/IEC 11506) ECMA-346 Private Integrated Services Network (P

43、ISN) Specification, Functional Model and Information Flows Message Centre Monitoring and Mailbox Identification Supplementary Services ETS 300 387 Private Telecommunication Network (PTN); Method for the specification of basic and supplementary services (1994) ISO 8601 Data elements and interchange f

44、ormats - Information interchange Representation of dates and times (2000) ITU-T Rec. I.112 Vocabulary of terms for ISDNs (1993) ITU-T Rec. I.210 Principles of telecommunication services supported by an ISDN and the means to describe them (1993) ITU-T Rec. Q.950 Digital Subscriber Signalling System N

45、o. 1 (DSS 1) Supplementary services protocols, structure and general principles (2000) ITU-T Rec. Z.100 Specification and Description Language (1999) 4 Definitions For the purposes of this Standard, the following definitions apply: 4.1 External definitions This Standard uses the following terms defi

46、ned in other documents: Address Header (ECMA-346) Application Protocol Data Unit (APDU) (ECMA-165) Call-Independent (ECMA-165) Complete Information (ECMA-346) Compressed Information (ECMA-346) Gateway PINX (ECMA-165) Mailbox (ECMA-346) Message Centre (MC) (ECMA-346) Message Status (ECMA-346) Message

47、 Type (ECMA-346) Message Waiting Signal (ECMA-346) New Message (ECMA-346) Originating PINX (ECMA-165) Private Integrated services Network eXchange (PINX) (ECMA-133) Private Integrated Services Network (PISN) (ECMA-133) Retrieved Message (ECMA-346) - 3 - Served User (ECMA-346) Signalling (ITU-T Rec.

48、I.112) Supplementary Service (ITU-T Rec. I.210) Supplementary Service Control Entity (ECMA-165) Terminating PINX (ECMA-165) Transit PINX (ECMA-165) 4.2 Other definitions 4.2.1 Message Centre PINX The PINX where the Message Centre is located. 4.2.2 Served User PINX The PINX where the Served User is l

49、ocated. 5 List of acronyms ANF Additional Network Feature APDU Application Protocol Data Unit ASN.1 Abstract Syntax Notation One ISDN Integrated Services Digital Network MCM Message Centre Monitoring MID Mailbox Identification NFE Network Facility Extension PICS Protocol Implementation Conformance Statement PINX Private Integrated services Network eXchange PISN Private Integrated Services Network SDL Specification and Description Language SS Supplementary Service 6 Signalling protocol for the s