EN 10025-5-2004 en Hot rolled products of structural steels - Part 5 Technical delivery conditions for structural steels with improved atmospheric corrosion resistance《结构钢热轧制品 第5部分.pdf

1、BRITISH STANDARD BS EN 10025-5:2004 Hot rolled products of structural steels Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance The European Standard EN 10025-5:2004 has the status of a British Standard ICS 77.140.10; 77.140.50 BS EN 10025-5:20

2、04 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 17 November 2004 BSI 17 November 2004 ISBN 0 580 44782 0 National foreword This British Standard is the official English language version of EN 10025-5:2004. BS EN 10025-5:2004 together with

3、BS EN 10025-1:2004 supersedes BS EN 10155:1993, which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee ISE/12, Structural steels, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secreta

4、ry. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogu

5、e or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the

6、text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front

7、cover, an inside front cover, the EN title page, pages 2 to 26, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments EUROPEAN STANDARD NORME EUROPENNE EUROPIS

8、CHE NORM EN 10025-5 November 2004 ICS 77.140.10; 77.140.50 Supersedes EN 10155:1993 English version Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance Produits lamins chaud en aciers de construction -

9、Partie 5: Conditions techniques de livraison pour les aciers de construction rsistance amliore la corrosion atmosphrique Warmgewalzte Erzeugnisse aus Bausthlen - Teil 5: Technische Lieferbedingungen fr wetterfeste Bausthle This European Standard was approved by CEN on 1 April 2004. CEN members are b

10、ound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the

11、 Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same statu

12、s as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia

13、, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN nat

14、ional Members. Ref. No. EN 10025-5:2004: EEN 10025-5:2004 (E) 2 Contents Page Foreword4 1 Scope 5 2 Normative references 5 2.1 General standards .5 2.2 Standards on dimensions and tolerances (see 7.7.1)6 2.3 Standards on testing .6 3 Terms and definitions .6 4 Classification and designation.7 4.1 Cl

15、assification7 4.1.1 Main quality classes 7 4.1.2 Grades and qualities .7 4.2 Designation 7 5 Information to be supplied by the purchaser .8 5.1 Mandatory information8 5.2 Options .8 6 Manufacturing process .8 6.1 Steel making process8 6.2 Deoxidation 9 6.3 Delivery conditions9 7 Requirements.9 7.1 G

16、eneral9 7.2 Chemical composition 9 7.3 Mechanical properties.9 7.3.1 General9 7.3.2 Impact properties.10 7.3.3 Improved deformation properties perpendicular to the surface 10 7.4 Technological properties 10 7.4.1 Weldability10 7.4.2 Formability10 7.5 Surface properties .11 7.5.1 Strip.11 7.5.2 Plate

17、s and wide flats .11 7.5.3 Sections 11 7.5.4 Bars and rods.11 7.6 Internal soundness11 7.7 Dimensions, tolerances on dimensions and shape, mass12 8 Inspection.12 8.1 General12 8.2 Type of inspection and inspection document 12 8.3 Frequency of testing .12 8.3.1 Sampling.12 8.3.2 Test units12 8.3.3 Ve

18、rification of chemical composition12 8.4 Tests to be carried out for specific inspection.12 9 Preparation of samples and test pieces13 9.1 Selection and preparation of samples for chemical analysis .13 9.2 Location and orientation of samples and test pieces for mechanical tests13 9.2.1 General13 9.2

19、.2 Preparation of samples .13 EN 10025-5:2004 (E) 3 9.2.3 Preparation of test pieces.13 9.3 Identification of samples and test pieces .13 10 Test methods .13 10.1 Chemical analysis13 10.2 Mechanical tests 14 10.3 Ultrasonic testing 14 10.4 Retests14 11 Marking, labelling, packaging 14 12 Complaints

20、.14 13 Options (see 5.2)14 Annex A (informative) List of corresponding former designations 22 Annex B (informative) List of national standards which correspond with EURONORMS referenced 23 Annex C (informative) Additional information for the use of steel with improved atmospheric corrosion resistanc

21、e .24 Annex D (informative) Notes on fabrication 25 Bibliography26 EN 10025-5:2004 (E) 4 Foreword This document (EN 10025-5:2004) has been prepared by Technical Committee ECISS/TC 10 “Structural steels - Grades and qualities”, the secretariat of which is held by NEN. This European Standard shall be

22、given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2005, and conflicting national standards shall be withdrawn at the latest by May 2005. This document supersedes together with EN 10025-1:2004, EN 10155:1993, Structural steels

23、with improved atmospheric corrosion resistance - Technical delivery conditions. The titles of the other parts of this document are: Part 1: General technical delivery conditions; Part 2: Technical delivery conditions for non-alloy structural steels; Part 3: Technical delivery conditions for normaliz

24、ed/normalized rolled weldable fine grain structural steels; Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels; Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

25、. This document has been prepared under Mandate M/120 given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the EU Construction Products Directive (89/106/EEC). For relationship with the EU Construction Products Directive, see informa

26、tive Annex ZA of EN 10025-1:2004. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

27、Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 10025-5:2004 (E) 5 1 Scope Part 5 of this document, in addition to part 1, specifies requirements for flat and long products of hot rolled st

28、eels with improved atmospheric corrosion resistance in the grades and qualities given in Tables 2 and 3 (chemical composition) and Tables 4 and 5 (mechanical properties) in the usual delivery conditions as given in 6.3. The thicknesses in which products of the steel grades and qualities specified in

29、 this document may be supplied are given in Table 1. In addition to EN 10025-1:2004 the steels specified in this document are especially intended for use in welded, bolted and riveted components which shall have enhanced resistance to atmospheric corrosion, for service at ambient temperatures (subje

30、ct to the restrictions described in 7.4.1). The steels specified in this Part 5 are not intended to be heat treated except products delivered in the delivery condition +N. Stress relief annealing is permitted (see also the NOTE in 7.3.1.1 of EN 10025-1:2004). Products delivered in +N condition can b

31、e hot formed and/or normalized after delivery (see Clause 3). 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document

32、(including any amendments) applies. 2.1 General standards EN 10020, Definition and classification of grades of steel. EN 10025-1:2004, Hot rolled products of structural steels - Part 1: General technical delivery conditions. EN 10027-1, Designation systems for steels - Part 1: Steel names, principal

33、 symbols. EN 10027-2, Designation systems for steels - Part 2: Numerical system. EN 10163-1, Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections Part 1: General requirements. EN 10163-2, Delivery requirements for surface condition of hot-rolled steel plate

34、s, wide flats and sections Part 2: Plates and wide flats. EN 10163-3, Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections Part 3: Sections. EN 10164, Steel products with improved deformation properties perpendicular to the surface of the product - Technica

35、l delivery conditions. EN 10221, Surface quality classes for hot-rolled bars and rods - Technical delivery conditions. CR 10260, Designation systems for steels - Additional symbols. EN 10025-5:2004 (E) 6 2.2 Standards on dimensions and tolerances (see 7.7.1) EN 10017, Non-alloy steel rod for drawing

36、 and/or cold rolling Dimensions and tolerances. EN 10024, Hot rolled taper flange I sections - Tolerances on shape and dimensions. EN 10029, Hot rolled steel plates 3 mm thick or above - Tolerances on dimensions, shape and mass. EN 10034, Structural steel I and H sections - Tolerances on shape and d

37、imensions. EN 10048, Hot rolled narrow steel strip - Tolerances on dimensions and shape. EN 10051, Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels - Tolerances on dimensions and shape. EN 10055, Hot-rolled steel equal flange tees with radiused root and toes - Di

38、mensions and tolerances on shape and dimensions. EN 10056-1, Structural steel equal and unequal leg angles - Part 1: Dimensions. EN 10056-2, Structural steel equal and unequal leg angles - Part 2: Tolerances on shape and dimensions. EN 10058, Hot rolled flat steel bars for general purposes - Dimensi

39、ons and tolerances on shape and dimensions. EN 10059, Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions. EN 10060, Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions. EN 10061, Hot rolled hexagon st

40、eel bars for general purposes - Dimensions and tolerances on shape and dimensions. EN 10067, Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass. EN 10162, Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances. EN 10279, H

41、ot rolled steel channels - Tolerances on shape and dimensions. 2.3 Standards on testing EN 10160, Ultrasonic testing of steel flat product of thickness equal to or greater than 6 mm (reflection method). EN 10306, Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams. EN

42、10308, Non-destructive testing - Ultrasonic testing of steel bars. EN ISO 643, Steels Micrographic determination of the apparent grain size (ISO 643:2003). 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 10025-1:2004 and the following apply. EN 10025-

43、5:2004 (E) 7 3.1 normalizing rolling rolling process in which the final deformation is carried out in a certain temperature range leading to a material condition equivalent to that obtained after normalizing so that the specified values of the mechanical properties are retained even after normalizin

44、g The abbreviated form of this delivery condition is +N. NOTE In international publications for both the normalizing rolling, as well as the thermomechanical rolling, the expression “controlled rolling“ may be found. However in view of the different applicability of the products a distinction of the

45、 terms is necessary. 3.2 as-rolled delivery condition without any special rolling and/or heat treatment condition The abbreviated form of this delivery condition is +AR. 3.3 steel with improved atmospheric corrosion resistance steel in which a certain number of alloying elements, such as P, Cu, Cr,

46、Ni, Mo, has been added in order to increase its resistance to atmospheric corrosion, by forming an auto-protective oxide layer on the base metal under the influence of weather conditions NOTE 1 Steel with improved atmospheric corrosion resistance is often called weathering steel. NOTE 2 Additional i

47、nformation for the use of steel with improved atmospheric corrosion resistance is given in Annex C. 4 Classification and designation 4.1 Classification 4.1.1 Main quality classes The steel grades specified in this document shall be classified as alloy special steels according to EN 10020. 4.1.2 Grad

48、es and qualities This document specifies the steel grades S235 and S355 (see Table 5), which differ in their mechanical properties. The steel grades may be supplied in qualities J0, J2 and K2. The qualities differ in specified impact energy requirements. Grade S355 is subdivided into the classes W a

49、nd WP, which differ mainly in their carbon and phosphorus contents (see Tables 2 and 3) and availability (see Table 1). 4.2 Designation 4.2.1 The designation shall be in accordance with EN 10025-1. NOTE For a list of corresponding former designations and the former designations from EURONORM 155 (1980) and EN 10155:1993 see Annex A, Table A.1. 4.2.2 The designation shall consist of: number of this document (EN 10025-5); steel name or the steel number; the steel name consisting o