EN 1020-2009 en Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of comb.pdf

1、BS EN 1020:2009ICS 97.100.20NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDNon-domestic forcedconvection gas-firedair heaters for spaceheating not exceedinga net heat input of 300kW incorporating a fanto assist transportationof combustion air orcombustion produ

2、ctsThis British Standard was published under the authority of the Standards Policy and Strategy Committee on 31January 2010 BSI 2010ISBN 978 0 580 58504 3Amendments/corrigenda issued since publicationDate CommentsBS EN 1020:2009National forewordThis British Standard is the UK implementation of EN 10

3、20:2009. Itsupersedes BS EN 1020:1998 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee GSE/20/4, Air heaters (gas).A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to inclu

4、de all the necessary provisionsof a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunityfrom legal obligations.BS EN 1020:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1020 November 2009 ICS 97.100.20 Supersedes EN 1020:199

5、7English Version Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products Gnrateurs dair chaud convection force utilisant les combustibles gazeux pour le chauf

6、fage de locaux autres que lhabitat individuel de dbit calorifique sur PCI infrieur ou gal 300 kW, comportant un ventilateur pour aider lalimentation en air comburant et/ou lvacuation des produits de combustion Gasbefeuerte Warmlufterzeuger mit verstrkter Konvektion fr den nicht-huslichen Gebrauch mi

7、t einer Nennwrmebelastung nicht ber 300 kW, mit Geblse zur Befrderung der Verbrennungsluft und/oder der Abgase This European Standard was approved by CEN on 5 October 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Europe

8、an Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English

9、, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, C

10、yprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION

11、 COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1020:2009: EBS EN 1020:2009EN 1020:2009 (E) 2 Contents Page Fo

12、reword . 41 Scope . 52 Normative references . 53 Terms and definitions . 73.1 Appliance and its constituent parts 74 Classification of systems . 164.1 Classification according to the nature of the gases used (Categories) 164.2 Classification of appliances according to the gases capable of being used

13、 . 174.3 Classification of appliances according to the mode of evacuation of the combustion products . 185 Constructional requirements . 205.1 General . 205.2 Adjusting, control and safety devices 285.3 Ignition devices . 345.4 Transportation of combustion air and/or flue gases 355.5 Flame supervisi

14、on system . 365.6 Start-gas flame establishment . 385.7 Main flame establishment 415.8 Main burner . 425.9 Facility for remote control 425.10 Thermostats and air temperature control 425.11 Gas pressure test points 435.12 Combustion chamber pressure relief . 435.13 Facilities for commissioning and te

15、sting . 435.14 Additional requirements for appliances designed for outdoor installation . 446 Operational requirements 446.1 Safety of operation . 446.2 Efficiency . 517 Test methods . 527.1 General . 527.2 Construction and design 617.3 Safety of operation . 627.4 Efficiency . 988 Marking and instru

16、ctions . 1018.1 Marking of the appliance 1018.2 Marking of the packaging. 1028.3 Utilization of symbols on the appliance and packaging . 1028.4 Instructions . 1049 Evaluation of conformity of POCEDs and their associated terminals . 1079.1 General . 1079.2 Type testing . 1079.3 Factory production con

17、trol (FPC) . 108Annex A (informative) National situations . 110A.1 General . 110A.2 Categories listed in the body of the standard and marketed in different countries 110A.3 Appliance supply pressures corresponding to the categories given in A.2 112A.4 Special categories marketed nationally or locall

18、y 113BS EN 1020:2009EN 1020:2009 (E) 3 A.5 Test gases corresponding to the special categories given in A.4 . 117A.6 Gas connections in the various countries 119A.7 Flue connections in the various countries . 120Annex B (informative) Equivalence rules . 121B.1 Conversion to categories within a restri

19、cted Wobbe index range . 121B.2 Conversion to categories within an identical Wobbe index range . 121B.3 Conversion to categories within a wider Wobbe index range 122Annex C (normative) Classification according to the evacuation of the combustion . 123C.1 Type B1123C.2 Type B2124C.3 Type B4125C.4 Typ

20、e B5127C.5 Type C1128C.6 Type C3129Annex D (normative) Requirements and test methods for separate air supply and combustion products evacuation ducts . 130D.1 Requirements . 130D.2 Test methods . 130Annex E (informative) Facilities for commissioning and testing (see 5.13) . 134E.1 Appliances with au

21、tomatic ignition of a start-gas flame . 134E.2 Appliances with direct automatic ignition of the main burner . 134Annex F (informative) Identification of gas types in use in various countries . 135Annex G (informative) Requirements in EN 1020 which relate to the design and construction of forced drau

22、ght burners covered in EN 676:1996 . 136Annex H (informative) A-deviations 137H.1 General . 137H.2 Switzerland . 137Annex I (normative) Special national conditions . 138I.1 Special national conditions 138I.2 Belgium . 138I.3 Italy 138Annex J (informative) National solutions for countries whose natio

23、nal bodies are Affiliate Members of CEN 139J.1 Categories listed in the body of the standard and marketed in different countries . 139J.2 Appliance supply pressures corresponding to the categories given in J.1 . 139J.3 Special categories marketed nationally or locally . 139J.4 Gases and test pressur

24、es corresponding to the special categories given in J.3 139Annex K (informative) Calculation of conversions of NOx . 140Annex L (informative) Sampling plan example 141L.1 Sampling plans 141L.2 Inspection levels and procedures 142Annex ZA (informative) Relationship between this European Standard and

25、the Essential Requirements of EU Directives 143Annex ZB (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive . 146ZB.2 Procedure(s) for attestation of conformity of construction products . 148ZB.3 CE marking and labelling 150Bibliography

26、 152BS EN 1020:2009EN 1020:2009 (E) 4 Foreword This document (EN 1020:2009) has been prepared by Technical Committee CEN/TC 180 “Domestic and non-domestic gas-fired air heaters and non-domestic gas-fired overhead radiant heaters”, the secretariat of which is held by AFNOR. This European Standard sha

27、ll be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2010, and conflicting national standards shall be withdrawn at the latest by May 2010. Attention is drawn to the possibility that some of the elements of this document ma

28、y be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1020:1997. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, a

29、nd supports essential requirements of EC Directive(s). For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document. This revision modifies EN 1020:1997. It has been prepared to incorporate requirements for combustion products evacuation ducts,

30、POCEDs, supplied as an integral part of the system to support the EU Directive 89/106/EEC on construction products under mandate M105. To this end it extends the scope of the standard to cover type B4and type B5 appliances. Furthermore, the opportunity presented by this revision has been taken to up

31、date the standard in respect to EN 437:2003. NOTE For countries requesting special categories (specified in EN 437:2003), the absence of specific information concerning A.3.3 and A.3.4 implies that the general requirements described in the body of the standard (see 4.1.1, 4.2.2, 4.2.3 and 4.2.5) als

32、o apply to these special categories. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greec

33、e, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 1020:2009EN 1020:2009 (E) 5 1 Scope This European Standard specifies the requirements and test metho

34、ds for the safety and efficiency of non-domestic gas-fired air heaters having a fan to assist the transportation of combustion air and/or flue gases, hereafter referred to as “appliances“. This includes appliances having forced draught burners. This European Standard applies to Type B12, B13, B14, B

35、22, B23, B42, B43, B44, B52, B53, C12, C13, C32, C33, C62and C63appliances with a heat input not exceeding 300 kW (based on net calorific value) intended for use in other than single unit residential dwellings. It also applies to appliances intended for outdoor installation. Provision of the heated

36、air may be by means of ducting or may be directly into the heated space. For Type C62and C63appliances, this European Standard only applies when such appliances are intended for final installation in a similar manner to Type C3appliances. This standard does not apply to: a) appliances intended for u

37、se in a single unit residential dwelling; b) appliances of the condensing type; c) appliances with atmospheric burners without a fan to assist the transportation of combustion air and/or flue gases; d) dual purpose air conditioning appliances (heating and cooling); e) appliances where the air is hea

38、ted by an intermediate fluid; f) appliances fitted with manual or automatic flue dampers; g) portable or transportable forced convection appliances; h) appliances having multiple heating units with a single draught diverter; i) appliances fitted with more than one flue outlet; j) appliances that are

39、 designed for continuous condensation within the flue system under normal operating conditions; k) appliances having combustion products evacuation ducts, POCEDs, that are non-metallic. This standard is applicable to appliances which are intended to be type tested. It also includes requirements conc

40、erning the evaluation of conformity, including factory production control, but these requirements only apply to POCEDs and their associated terminals. NOTE Requirements for appliances which are not type tested would need to be subject to further consideration. 2 Normative references The following re

41、ferenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 88-1, Pressure regulators and associated safety devices for ga

42、s appliances Part 1: Pressure regulators for inlet pressures up to and including 500 mbar BS EN 1020:2009EN 1020:2009 (E) 6 EN 125, Flame supervision devices for gas burning appliances Thermo-electric flame supervision devices EN 126, Multifunctional controls for gas burning appliances EN 161, Autom

43、atic shut-off valves for gas burners and gas appliances EN 257, Mechanical thermostats for gas-burning appliances EN 298:2003, Automatic burner control systems for gas burners and gas burning appliances with or without fans EN 437:2003, Test gases Test pressures Appliance categories EN 1859:2000, Ch

44、imneys Metal Chimneys Test methods EN 10226-1, Pipe threads where pressure tight joints are made on the threads Part 1: Taper external threads and parallel internal threads Dimensions, tolerances and designation EN 10226-2, Pipe threads where pressure tight joints are made on the threads Part 2: Tap

45、er external threads and taper internal threads Dimensions, tolerances and designation EN 12067-1, Gas/air ratio controls for gas burners and gas burning appliances Part 1: Pneumatic types EN 60335-1:2002, Household and similar electrical appliances Safety Part 1: General requirements (IEC 60335-1:20

46、01, modified) EN 60335-2-102, Household and similar electrical appliances Safety Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections (IEC 60335-2-102:2004, modified) EN 60529:1991, Degrees of protection provided by enclosures (IP code) (IE

47、C 60529:1989) EN 60584-1, Thermocouples Part 1: Reference tables (IEC 60584-1:1995) EN 60584-2, Thermocouples Part 2: Tolerances (IEC 60584- 2:1982 + A1:1989) EN 60730-1,Automatic electrical controls for household and similar use Part 1: General requirements (IEC 60730-1:1999, modified) EN 60730-2-9

48、:2002, Automatic electrical controls for household and similar use Part 2-9: Particular requirements for temperature sensing controls (IEC 60730-2-9:2000, modified) EN 61058-1, Switches for appliances Part 1: General requirements (IEC 61058-1:2000 + A1:2001, modified) EN ISO 228-1, Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) EN ISO 3166-1, Codes for the representation of names of countries and their subd