EN 10204-2004 en Metallic products - Types of inspection documents《金属材料 检验文件的类型》.pdf

1、BRITISH STANDARD BS EN 10204:2004 Metallic products Types of inspection documents The European Standard EN 10204:2004 has the status of a British Standard ICS 01.110; 77.080.01; 77.120.01 BS EN 10204:2004 This British Standard was published under the authority of the Standards Policy and Strategy Co

2、mmittee on 25 October 2004 BSI 25 October 2004 ISBN 0 580 44653 0 National foreword This British Standard is the official English language version of EN 10204:2004. It supersedes BS EN 10204:1991 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee ISE/5,

3、Technical delivery conditions, classification and designation of steels, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications r

4、eferred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary pr

5、ovisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretati

6、on, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 10, an inside back cover and a back cov

7、er. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 10204 October 2004 ICS 01.110; 77.080.01; 77.120.01 Supersedes EN 10204:1991 English ve

8、rsion Metallic products - Types of inspection documents Produits mtalliques - Types de documents de contrle Metallische Erzeugnisse - Arten von Prfbescheinigungen This European Standard was approved by CEN on 8 August 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations wh

9、ich stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European St

10、andard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national st

11、andards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN C

12、OMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10204:2004: EEN 10204:2004 (E) 2

13、 Contents page Foreword3 1 Scope 4 2 Terms and definitions .4 3 Inspection documents based on non-specific inspection 4 4 Inspection documents based on specific inspection 5 5 Validation and transmission of inspection documents.5 6 Transmission of inspection documents by an intermediary 6 Annex A (i

14、nformative) Summary of inspection documents .7 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 97/23/EC 8 Bibliography 10 EN 10204:2004 (E) 3 Foreword This document (EN 10204:2004) has been prepared by Technical Committee ECISS/TC 9 “

15、Technical conditions of delivery and quality control”, the secretariat of which is held by IBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2005, and conflicting national standards shall

16、 be withdrawn at the latest by April 2005. This document supersedes EN 10204:1991. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directives 97/23/EC. For relationship with EU

17、Directive 97/23/EC, see informative Annex ZA, which is an integral part of this document. The main changes are: new definitions: “manufacturer” , “intermediary”, “product specification”; reduction of the number of inspection documents: type 2.3 of the previous edition has been deleted; type 3.1 repl

18、aces type 3.1.B of the previous edition; type 3.2 replaces types 3.1.A, 3.1. C and the inspection report 3.2 of the previous edition. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Aust

19、ria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 10204:2004 (E) 4 1 Scope 1.1

20、This document specifies the different types of inspection documents supplied to the purchaser, in accordance with the requirements of the order, for the delivery of all metallic products e.g. plates, sheets, bars, forgings, castings, whatever their method of production. 1.2 This document may also ap

21、ply to non-metallic products. 1.3 This document is used in conjunction with the product specifications which specify the technical delivery conditions of the products. NOTE 1 The list of information that may be included in the inspection documents can be found in appropriate documents, e.g. EN 10168

22、 for steel. NOTE 2 Annex A gives a summary of the different inspection documents. 2 Terms and definitions For the purposes of this document, the following terms and definitions apply. 2.1 non-specific inspection inspection carried out by the manufacturer in accordance with his own procedures to asse

23、ss whether products defined by the same product specification and made by the same manufacturing process, are in compliance with the requirements of the order or not. The products inspected are not necessarily the products actually supplied 2.2 specific inspection inspection carried out, before deli

24、very, according to the product specification, on the products to be supplied or on test units of which the products supplied are part, in order to verify that these products are in compliance with the requirements of the order 2.3 manufacturer organization that manufactures the respective products a

25、ccording to the requirements of the order and to the properties specified in the referenced product specification 2.4 intermediary organization which is supplied with products by the manufacturers and which then in turn supplies them without further processing or after processing without changing th

26、e properties specified in the purchase order and referenced product specification 2.5 product specification complete detailed technical requirements relevant for the order, stated in written form e.g. referenced regulations, standards and other specifications 3 Inspection documents based on non-spec

27、ific inspection 3.1 Declaration of compliance with the order “type 2.1” Document in which the manufacturer declares that the products supplied are in compliance with the requirements of the order, without inclusion of test results. EN 10204:2004 (E) 5 3.2 Test report “type 2.2” Document in which the

28、 manufacturer declares that the products supplied are in compliance with the requirements of the order and in which he supplies test results based on non-specific inspection. 4 Inspection documents based on specific inspection 4.1 Inspection certificate 3.1 “type 3.1” Document issued by the manufact

29、urer in which he declares that the products supplied are in compliance with the requirements of the order and in which he supplies test results. The test unit and the tests to be carried out are defined by the product specification, the official regulation and corresponding rules and/or the order. T

30、he document is validated by the manufacturers authorized inspection representative, independent of the manufacturing department. It shall be permissible for the manufacturer to transfer on to the inspection certificate 3.1 relevant test results obtained by specific inspection on primary or incoming

31、products he uses, provided that the manufacturer operates traceability procedures and can provide the corresponding inspection documents required. 4.2 Inspection certificate 3.2 “type 3.2” Document prepared by both the manufacturers authorized inspection representative, independent of the manufactur

32、ing department and either the purchasers authorized inspection representative or the inspector designated by the official regulations and in which they declare that the products supplied are in compliance with the requirements of the order and in which test results are supplied. It shall be permissi

33、ble for the manufacturer to transfer on to the inspection certificate 3.2 relevant test results obtained by specific inspection on primary or incoming products he uses, provided that the manufacturer operates traceability procedures and can provide the corresponding inspection documents required. 5

34、Validation and transmission of inspection documents The inspection document shall be validated by the responsible person(s) (name and position). The retention and transmission of documents shall be either in electronic data or paper form. EN 10204:2004 (E) 6 6 Transmission of inspection documents by

35、 an intermediary An intermediary shall only pass on either an original or a copy of the inspection documents provided by the manufacturer without any alteration. This documentation shall be accompanied by suitable means of identification of the product, in order to ensure the traceability between th

36、e product and the documentation. Copying of the original document is permitted, provided that: traceability procedures are operated; the original document is available on request. When producing copies it is permissible to replace the information on the original delivered quantity by the actual deli

37、vered partial quantity. EN 10204:2004 (E) 7 Annex A (informative) Summary of inspection documents A summary of the inspection documents is given in Table A.1. Table A.1 Summary of inspection documents EN 10204 Designation of the document type Document Document Reference English version German versio

38、n French version content validated by Type 2.1 Declaration of compliance with the order Werksbeschei- nigung Attestation de conformit la commande Statement of compliance with the order The manufacturer Type 2.2 Test report Werkszeugnis Relev de contrle Statement of compliance with the order, with in

39、dication of results of non- specific inspection The manufacturer Type 3.1 Inspection certificate 3.1 Abnahmeprf- zeugnis 3.1 Certificat de rception 3.1 Statement of compliance with the order, with indication of results of specific inspection The manufacturers authorized inspection representative ind

40、ependent of the manufacturing department Type 3.2 Inspection certificate 3.2 Abnahmeprf- zeugnis 3.2 Certificat de rception 3.2 Statement of compliance with the order, with indication of results of specific inspection The manufacturers authorized inspection representative independent of the manufact

41、uring department and either the purchasers authorized inspection representative or the inspector designated by the official regulations EN 10204:2004 (E) 8 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 97/23/EC This European Standar

42、d has been prepared under a mandate given to CEN by the European Commission to provide a means of conforming to Essential Requirements of the New Approach Directive 97/23/EC of the European Parliament and the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pre

43、ssure equipment. Once this standard is cited in the Official Journal of the European Union under that Directive and has been implemented as a national standard in at least one Member State, compliance with the clauses of this standard given in Table ZA.1 confers, within the limits of the scope of th

44、is standard, a presumption of conformity with the corresponding Essential Requirements of that Directive and associated EFTA regulations. Table ZA.1 Correspondence between this European Standard and Directive 97/23/EC Clauses of this EN Essential Requirements of Directive 97/23/EC Qualifying remarks

45、/Notes 3 and 4 Annex I section 4.3 The application of the inspection documents for different types of materials for pressure equipment is given in Figure ZA.1. NOTE The terms “certificate of specific product control“ of Directive 97/23/EC and “inspection document based on specific inspection“ of thi

46、s standard are equivalent.WARNING: Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard. EN 10204:2004 (E) 9 aNon-specific inspection may be replaced by specific inspection if specified in the material standard or the order. bQualit

47、y management system of the material manufacturer certified by a competent body established within the Community and having undergone a specific assessment for materials. Figure ZA.1 Conformity with Annex I section 4.3 of Directive 97/23/EC EN 10204:2004 (E) 10 Bibliography 1 EN 10168, Steel products

48、 - Inspection documents List of information and description. blankBS EN 10204:2004 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the in

49、ternational level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible,