EN 10223-8-2013 en Steel wire and wire products for fencing and netting - Part 8 Welded mesh gabion products《栅栏用钢丝和钢丝制品 第8部分 焊接网金属筐产品》.pdf

1、BSI Standards PublicationBS EN 10223-8:2013Steel wire and wire productsfor fencing and nettingPart 8: Welded mesh gabion productsBS EN 10223-8:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 10223-8:2013.The UK participation in its preparation was entrusted

2、 to TechnicalCommittee ISE/106, Wire Rod and Wire.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Sta

3、ndards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 64505 1ICS 77.140.65Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 December 2013.

4、Amendments issued since publicationDate Text affectedBS EN 10223-8:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 10223-8 December 2013 ICS 77.140.65 English Version Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products Fils et produits trfils en acier

5、pour cltures et grillages - Partie 8: Gabions mailles soudes Stahldraht und Drahterzeugnisse fr Zune und Drahtgeflechte - Teil 8: Geschweite Gitter fr Steinkrbe This European Standard was approved by CEN on 29 June 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which

6、 stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This Euro

7、pean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members ar

8、e the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Ro

9、mania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and

10、by any means reserved worldwide for CEN national Members. Ref. No. EN 10223-8:2013 EBS EN 10223-8:2013EN 10223-8:2013 (E) 2 Contents Page Foreword 3 1 Scope 4 1.1 Subject 4 1.2 Intended use .4 2 Normative references 5 3 Terms and definitions .5 4 Classification . 13 5 Information to be supplied by t

11、he purchaser 13 6 Manufacture . 14 6.1 General . 14 6.2 Base metal . 14 6.2.1 Low carbon steel for wire 14 6.2.2 Stainless steel for wire . 14 6.3 Metallic coatings . 14 6.4 Requirements for PVC coating 14 7 Requirements 17 7.1 General . 17 7.2 Gabion and gabion mattress sizes . 17 7.3 Mesh sizes .

12、17 7.4 Wire properties of welded gabion products 18 7.5 Weld shear strength . 18 7.6 Ageing and corrosion resistance 18 7.6.1 Zn95Al5 class A or equivalent advanced metallic coatings . 18 7.6.2 Advanced metallic coatings class A . 18 7.6.3 PVC coated 19 7.6.4 Hot dip galvanized products 19 7.7 Lacin

13、g wire, spirals and rings . 19 8 Sampling and testing . 19 9 Inspection and documentation 19 10 Packaging 20 Annex A (informative) Description of environment of installation site, coating wire requirements . 21 Bibliography . 24 BS EN 10223-8:2013EN 10223-8:2013 (E) 3 Foreword This document (EN 1022

14、3-8:2013) has been prepared by Technical Committee ECISS/TC 106 “Wire rod and wires”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2014, and conf

15、licting national standards shall be withdrawn at the latest by June 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. EN 10223, St

16、eel wire and wire products for fencing and netting consists of the following parts: Part 1: Zinc and zinc-alloy coated steel barbed wire Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes Part 3: Hexagonal steel wire mesh products for civil engineering purposes Pa

17、rt 4: Steel wire welded mesh fencing Part 5: Steel wire woven hinged joint and knotted mesh fencing Part 6: Steel wire chain link fencing Part 7: Steel wire welded panels for fencing Part 8: Welded mesh gabion products (the present document) According to the CEN-CENELEC Internal Regulations, the nat

18、ional standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Li

19、thuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 10223-8:2013EN 10223-8:2013 (E) 4 1 Scope 1.1 Subject This European Standard specifies requirements for the mechanical properties, dimensio

20、ns, coatings, test methodology and delivery conditions of welded mesh gabions products. The general meaning of welded mesh gabion is a metallic box made of welded wire mesh to be filled with stone or other suitable material. Only the characteristics of the metallic cage are subject of this document.

21、 Filling materials, e.g. coarse armourstone, are covered in other standards. This document covers gabions produced from welded wire fabric and accessories coated with a zinc coating, a hot-dip galvanization or a zinc-aluminium alloy, polyvinyl chloride (PVC) or stainless steel. Accessories include c

22、omplementary materials such as spiral binders, rings, lacing wires, tie-rods or spacers. 1.2 Intended use The intended use for the considered construction product is: earth retention, soil reinforcement systems, river training, erosion control purposes, slope retention, sound barriers, fencing, land

23、scaping, covering or cladding as well as architectural purposes. Figure 1 below shows some relevant examples of applications of gabions. Key 1 stepped face retaining structure 2 flush face retaining structure 3 slope protection 4 free standing walls, e.g. sound barrier 5 claddings, e.g. for architec

24、tural applications Figure 1 Example of applications of gabions BS EN 10223-8:2013EN 10223-8:2013 (E) 5 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition ci

25、ted applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 10088-1, Stainless steels Part 1: List of stainless steels EN 10218-2:2012, Steel wire and wire products General Part 2: Wire dimensions and tolerances EN 10244-1, Steel wire and

26、 wire products Non-ferrous metallic coatings on steel wire Part 1: General principles EN 10244-2, Steel wire and wire products Non-ferrous metallic coatings on steel wire Part 2: Zinc or zinc alloy coatings EN 10245-1, Steel wire and wire products Organic coatings on steel wire Part 1: General rules

27、 EN 10245-2, Steel wire and wire products Organic coatings on steel wire Part 2: PVC finished wire EN ISO 1461, Hot dip galvanized coatings on fabricated iron and steel articles Specifications and test methods (ISO 1461) EN ISO 4892-2, Plastics Methods of exposure to laboratory light sources Part 2:

28、 Xenon-arc lamps (ISO 4892-2) EN ISO 4892-3, Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps (ISO 4892-3) EN ISO 6988, Metallic and other non-organic coatings Sulfur dioxide test with general condensation of moisture (ISO 6988) EN ISO 9223:2012, Corrosion of met

29、als and alloys Corrosivity of atmospheres Classification, determination and estimation (ISO 9223:2012) EN ISO 9227, Corrosion tests in artificial atmospheres Salt spray tests (ISO 9227) EN ISO 16120-2, Non-alloy steel wire rod for conversion to wire Part 2: Specific requirements for general-purpose

30、wire rod (ISO 16120-2) DIN 50018, Testing in a saturated atmosphere in the presence of sulfur dioxide 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 gabion welded wire panelled container, partitioned, of variable size, and filled with stone

31、or other suitable material at the site of use, or to be factory prefilled to form flexible, permeable, monolithic structures such as retaining walls, sea walls, channel linings, revetments, and weirs for erosion control Note 1 to entry: See Figures 2 a) and 2 b). BS EN 10223-8:2013EN 10223-8:2013 (E

32、) 6 3.2 gabion mattress gabion with a relatively short height in comparison with the width and length dimensions, generally used for river bank, slope protection or anti-scour erosion protection Note 1 to entry: The inner partitions that divide the cage are called diaphragms and are usually spaced a

33、t one metre intervals. At the customers request, this interval can be reduced. The gabion current sizes are shown in Table 2. 3.3 trapezoidal gabion gabion of which the width of the lid is smaller than the width of the base Note 1 to entry: See Figure 2 b). 3.4 bracing tie length of suitable wire us

34、ed to brace the gabion either across corners or front to back 3.5 lacing wire length of suitable wire used to assemble gabions and gabion mattresses 3.6 spirals spiral binder spiral binders for gabions; section of steel wire coated with zinc, zinc-aluminium alloy or organic over-coating, or stainles

35、s steel wire forming a spiral and used to assemble and interconnect empty gabions and to close and secure the units filled with stone, as a replacement for lacing wire or rings 3.7 joining pin piece of steel wire with J-shaped end, used to attach adjacent gabions assembled by spiral 3.8 gabion ring

36、C-shaped ring, made from very high resistance zinc or zinc-aluminium alloy coated steel wire or stainless steel wire, used to assemble and interconnect the empty gabions and to close and secure the units filled with stone 3.9 mesh sizes centre-to-centre distance between two consecutive wires 3.10 lo

37、oped gabion gabion existing of panels with looped ends which are connected to each other by locking pins 3.11 locking pin from metallic coated wire or stainless steel made pin, used to connect panels with looped ends and thus build a looped gabion box or a cellular structure BS EN 10223-8:2013EN 102

38、23-8:2013 (E) 7 Key 1 lid panel 2 back panel 3 end panel 4 diaphragm panel 5 face panel 6 base panel Factory assembly of panels: one clip every 225 mm on all joints. Figure 2 a) Some illustrations of definitions BS EN 10223-8:2013EN 10223-8:2013 (E) 8 Key 1 joining pin 2 lid 3 diaphragm 4 base 5 end

39、 6 spirals 7 trapezoidal gabion 8 bracing tie H height L length W width Figure 2 b) Some illustrations of definitions BS EN 10223-8:2013EN 10223-8:2013 (E) 9 Figures 3 a) to 3 d) show various types of jointing systems: a) b) BS EN 10223-8:2013EN 10223-8:2013 (E) 10 c) d)BS EN 10223-8:2013EN 10223-8:

40、2013 (E) 11 Possible bracing tie layouts: Diagonally in the corners or across the gabion: e) The panel cut, the stacking or use of special panels (trapezoidal, circular, with rounded corners or special corners, etc.) allow obtaining a great variety of layouts: f) The radius can be freely adjusted: g

41、) The gabions can be fitted into one another: h) BS EN 10223-8:2013EN 10223-8:2013 (E) 12 Custom-made elements (trapezoidal panels, etc.) can be used: i) Special trapezoidal panels or rounded shapes for very small radius: j) Re-entrants for guardrail or fence fitting (above): BS EN 10223-8:2013EN 10

42、223-8:2013 (E) 13 Re-entrants for letter boxes, lighting, etc. (below): k) Figure 3 Examples illustrating the definitions for enclosed cellular structure 4 Classification Welded wire mesh gabions can be classified according to the coating, as follows: Welded wire fabric, hot-dip galvanized according

43、 to EN ISO 1461 after manufacturing (welding, bending, etc.). Welded wire fabric made from wire, coated with zinc-aluminium alloy coated before welding into the fabric. Spirals, lacing wire, locking pins, c-rings and bracing ties are also produced from zinc-aluminium-alloy coated wire. Welded wire f

44、abric, and lacing wire are produced from zinc coated wire and over coated with PVC. Spirals, locking pins and brace ties are produced from stainless steel wire or zinc coated wire and over coated with PVC. Welded wire fabric, spirals, lacing wire, locking pins and brace ties are produced from stainl

45、ess steel wire. 5 Information to be supplied by the purchaser The following information shall be supplied by the purchaser at the time of enquiry and order: a) number of this European Standard; b) quantity and type of gabion; c) size of the units; d) mesh size; e) wire diameter; f) stainless steel w

46、ire (see 6.2.2) or steel wire including metallic coating type (see 6.3); g) description of the site environment level (see Table 1); h) characteristics of the eventual PVC coating (see 6.4); BS EN 10223-8:2013EN 10223-8:2013 (E) 14 i) inspection documentation requirements. 6 Manufacture 6.1 General

47、The Quality Management System, supervising the internal manufacturers procedures, should be certified according to EN ISO 9001 by an independent body. 6.2 Base metal 6.2.1 Low carbon steel for wire If low carbon steel wires are used, the chemical composition shall be in accordance with EN ISO 16120-

48、2. 6.2.2 Stainless steel for wire For seaside applications, electro-polishing and passivation for panels and accessories are needed. If stainless steel wires are used, the chemical composition shall be in accordance with EN 10088-1. 6.3 Metallic coatings The metallic coating (zinc/aluminium alloy) s

49、hall be in accordance with EN 10218-2, EN 10244-1, EN 10244-2 and EN ISO 1461. For coating weights, see 7.4. 6.4 Requirements for PVC coating The initial properties of the PVC coating on the wire and welded wire fabric shall fulfil the requirements of EN 10245-1 and EN 10245-2. BS EN 10223-8:2013EN 10223-8:2013 (E) 15 Table 1 Description of environment of installation site, coating wire requirements Site Environment level a(in accordance with EN ISO 9223:2012, Table 1) Plastic coating material C