EN 1034-1-2000 en Safety of Machinery - Safety Requirements for the Design and Construction of Paper-Making and Finishing Machines - Part 1 Common Requirements (Incorporates Amendm.pdf

1、|BRITISH STANDARD BS EN 1034-1:2000 +A1:2010ICS 85.100; 13.110NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWSafety of machinery Safety requirements for the design and construction of paper-making and finishing machines Part 1: Common requirementsNational forewordThis British

2、Standard is the UK implementation of EN 1034-1:2000+A1:2010. It supersedes BS EN 1034-1:2000 which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, te

3、xt altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted by Technical Committee MCE/3, Safeguarding of machinery, to Subcommittee MCE/3/9, Paper and printing machines Safety.A list of organizations represented on this subcommittee can be obtained on req

4、uest to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 1034-1:2000+A1:2010This British Standard, having bee

5、n prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 July 2000 BSI 2010Amendments/corrigenda issued since publicationDate Comments 31 July 2010 Implementation of CEN amendment A1:2010ISBN 978 0 58

6、0 63149 8EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1034-1:2000+A1 March 2010 ICS 85.100 Supersedes EN 1034-1:2000English Version Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements Scurit des machin

7、es - Prescriptions de scurit pour la conception et la construction de machines de fabrication et de finition du papier - Partie 1: Prescriptions communes Sicherheit von Maschinen - Sicherheitstechnische Anforderungen fr Konstruktion und Bau von Maschinen der Papierherstellung und Ausrstung - Teil 1:

8、 Gemeinsame Anforderungen This European Standard was approved by CEN on 17 September 1999 and includes Amendment 1 approved by CEN on 17 January 2010.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status

9、of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A ve

10、rsion in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech R

11、epublic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN

12、 DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1034-1:2000+A1:2010: EEN 1034-1:2000+A1:2010 (E) 2 Contents Page Foreword 3I

13、ntroduction .51 Scope 52 Normative references 53 Terms and definitions .84 List of significant hazards . 115 Safety requirements and/or measures . 125.1 Requirements for safety devices 135.2 Safety devices on power transmission elements 135.3 Avoiding crushing hazards 145.4 Drawing-in hazards on cyl

14、inders, rollers, rolls, felts, wires . 145.5 Workplaces, access stairs, catwalks, passageways . 185.6 Start-up warning device . 215.7 Emergency stop devices 225.8 Isolation and energy dissipation, prevention of unexpected start-up 225.9 Equipment for make-ready and maintenance, lubrication points .

15、245.10 Equipment for cleaning and removal of broke and waste 255.11 Circular knives 255.12 Stationary knives (severing knives, tail cutters, water-jet knives) 255.13 Explosion protection 255.14 Control systems and actuators . 265.15 Noise 265.16 Emission of hazardous substances 275.17 Hot surfaces 2

16、75.18 Integrated lighting. 285.19 Fire . 285.20 Radiation 285.21 Laser equipment . 285.22 Ergonomic principles . 285.23 Electrical equipment . 285.24 Hydraulic equipment 295.25 Pneumatic equipment 295.26 !Pumps“ . 296 Verification of compliance with safety requirements and/or measures . 297 Informat

17、ion for use . 307.1 General . 307.2 Marking 307.3 Instruction handbook . 31Annex A (informative) Trilingual alphabetical list of paper making and paper finishing machines 32Annex ZA (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC“ 33

18、Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ 34!Bibliography“ 35BS EN 1034-1:2000+A1:2010EN 1034-1:2000+A1:2010 (E) 3 Foreword This document (EN 1034-1:2000+A1:2010) has been prepared by Technical Committee CEN/TC 198

19、“Printing and paper machinery - Safety”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2010, and conflicting national standards shall be withdr

20、awn at the latest by September 2010. This document includes Amendment 1, approved by CEN on 2010-01-17. This document supersedes EN 1034-1:2000. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. Attention is drawn to the possibility that some of th

21、e elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. !This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and suppo

22、rts essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ This Standard is part 1 of a standard for the technical safety requirements for the design and construction of paper making and finishi

23、ng machines which consists of the following parts: Part 1: Common requirements Part 2: Barking drums Part 3: Winders and slitters, plying machines Part 4: Pulpers and their feeding facilities Part 5: Sheeters Part 6: Calanders !Part 7: Chests“ !Part 13: Machines for de-wiring bales and units Part 14

24、: Reel splitter Part 16: Paper and board making machines Part 17: Tissue making machines Part 21: Coaters Part 22: Wood grinders“ BS EN 1034-1:2000+A1:2010EN 1034-1:2000+A1:2010 (E) 4 CEN/TC 198 intends to prepare further parts to cover the paper making and finishing machines listed in annex A. Acco

25、rding to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, It

26、aly, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 1034-1:2000+A1:2010EN 1034-1:2000+A1:2010 (E) 5 Introduction This European Standard is a C type standard as stated in !EN ISO 12100:2003

27、“. The standard consists of a number of parts which are listed in annex A. The extent to which hazards are covered is indicated in the scope of this standard. 1 Scope 1.1 This standard applies to paper making and paper finishing machines. It contains definitions and requirements which apply to all p

28、aper making and paper finishing machines listed in annex A and shall be used in connection with the specific part applicable for the respective machine listed in annex A. Specific parts can contain additional requirements or deviations from !EN 1034-1“ in which case the specific stipulations take pr

29、ecedence over the specification made in !EN 1034-1“. The standard deals with the hazards listed in 4. 1.2 This standard does not apply to machines used in paper converting. See EN 1010-1 to EN 1010-5. 1.3 This standard applies to machines produced after. (date of CEN approval). 2 Normative reference

30、s The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. !deleted text“ EN 349, Safety of machinery Mini

31、mum gaps to avoid crushing of parts of the human body !deleted text“ EN 457, Safety of machinery Auditory danger signals General requirements, design and testing (ISO 7731:1986 modified) EN 547-1, Safety of machinery Human body measurements Part 1: Principles for determining the dimensions required

32、for openings for whole body access into machinery EN 547-2, Safety of machinery Human body measurements Part 2: Principles for determining the dimensions required for access openings EN 547-3, Safety of machinery Human body measurements Part 3: Anthropometric data !deleted text“ EN 614-1, Safety of

33、machinery Ergonomics design principles Part 1: Terminology and general principles EN 614-2, Safety of machinery Ergonomics design principles Part 2: Interaction between the design of machinery and tasks BS EN 1034-1:2000+A1:2010EN 1034-1:2000+A1:2010 (E) 6 EN 626-1, Safety of machinery Reduction of

34、risk to health from hazardous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturers EN 626-2, Safety of machinery Reduction of risk to health from hazardous substances emitted by machinery Part 2: Methodology leading to verification procedures !EN 809, Pum

35、ps and pump units for liquids Common safety requirements“ EN 811:1996, Safety of machinery Safety distances to prevent danger zones being reached by the lower limbs EN 894-1, Safety of machinery Ergonomic requirements for the design of displays and control actuators Part 1: General principles for hu

36、man interactions with displays and control actuators EN 894-2, Safety of machinery Ergonomic requirements for the design of displays and control actuators Part 2: Displays EN 894-3, Safety of machinery Ergonomic requirements for the design of displays and control actuators Part 3: Control actuators

37、EN 953:1997, Safety of machinery Guards General requirements for the design and construction of fixed and movable guards !deleted text“ EN 982, Safety of machinery Safety requirements for fluid power systems and their components Hydraulics EN 983, Safety of machinery Safety requirements for fluid po

38、wer systems and their components Pneumatics EN 1005-2, Safety of machinery Human physical performance Part 2: Manual handling of objects associated to machinery EN 1005-3, Safety of machinery Human physical performance Part 3: Recommended force limits for machinery operation EN 1010-1, Safety of mac

39、hinery Safety requirements for the design and construction of printing and paper converting machines Part 1: Common requirements EN 1010-2, Safety of machinery Safety requirements for the design and construction of printing and paper converting machines Part 2: Printing and varnishing machines inclu

40、ding pre-press machinery EN 1010-3, Safety of machinery Safety requirements for the design and construction of printing and paper converting machines Part 3: Cutting machines EN 1010-4, Safety of machinery Safety requirements for the design and construction of printing and paper converting machines

41、Part 4: Bookbinding, Paper Converting and Paper Finishing Machines EN 1010-5, Safety of machinery Safety requirements for the design and construction of printing and paper converting machines Part 5: Machines for the production of corrugated board and machines for the conversion of flat and corrugat

42、ed board EN 1037:1995, Safety of machinery Prevention of unexpected start-up !deleted text“ EN 1088, Safety of machinery Interlocking devices associated with guards Principles for design and selection BS EN 1034-1:2000+A1:2010EN 1034-1:2000+A1:2010 (E) 7 EN 1127-1, Explosives atmospheres Explosion p

43、rotection Part 1: Basic concepts and methodology EN 1760-1, Safety of machinery Pressure-sensitive protective devices Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors prEN 1760-2, Safety of machinery Pressure-sensitive protective devices

44、Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars prEN 1837, Safety of machinery Integral lighting of machines !EN 13023:2003, Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment Accuracy

45、grades 2 and 3“ !EN 13478:2001, Safety of machinery Fire prevention and protection“ !EN ISO 11688-1:1998, Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning (ISO/TR 11688-1:1995)“ !EN ISO 12100-1:2003, Safety of machinery Basic concepts, general princ

46、iples for design Part 1: Basic terminology, methodology (ISO 12100-1:2003)“ !EN ISO 12100-2:2003, Safety of machinery Basic concepts, general principles for design Part 2: Technical principles (ISO 12100-2:2003)“ !EN ISO 13732-1:2008, Ergonomics of the thermal environment Methods for the assessment

47、of human responses to contact with surfaces Part 1: Hot surfaces (ISO 13732-1:2006)“ !EN ISO 13849-1:2008, Safety of machinery Safety-related parts of control systems Part 1: General principles for design (ISO 13849-1:2006)“ !EN ISO 13850:2008, Safety of machinery Emergency stop Principles for desig

48、n (ISO 13850:2006)“ !EN ISO 13857:2008, Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)“ !EN ISO 14121-1:2007, Safety of machinery Risk assessment Part 1: Principles (ISO 14121-1:2007)“ !EN ISO 14122-3, Safety of machinery Permanent means of access to machinery Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2001)“ !EN ISO 14122-4, Safety of machinery Permanent me