1、BRITISH STANDARDBS EN 1125:2008Building hardware Panic exit devices operated by a horizontal bar, for use on escape routes Requirements and test methodsICS 91.190g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g
2、44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 1125:2008This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2008 BSI 2008ISBN 978 0 580 62450 6National forewordThis British Standard is the UK implementation of EN 112
3、5:2008. It supersedes BS EN 1125:1997 which is withdrawn.The UK participation in its preparation was entrusted by Technical Committee B/538, Doors, windows, shutters, hardware and curtain walling, to Subcommittee B/538/4, Building hardware.A list of organizations represented on this committee can be
4、 obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations. Amendments/corrigenda issued since public
5、ationDate CommentsEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 1125January 2008ICS 91.190 Supersedes EN 1125:1997 English VersionBuilding hardware - Panic exit devices operated by a horizontalbar, for use on escape routes - Requirements and test methodsQuincaillerie pour le btiment - Fermetures
6、 anti-paniquemanoeuvres par une barre horizontale, destines treutilises sur des voies dvacuation - Exigences etmthodes dessaiSchlsser und Baubeschlge - Paniktrverschlsse mithorizontaler Bettigungsstange, fr Tren in Fluchtwegen -Anforderungen und PrfverfahrenThis European Standard was approved by CEN
7、 on 30 November 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards m
8、ay be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CE
9、N Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
10、 Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any for
11、m and by any means reservedworldwide for CEN national Members.Ref. No. EN 1125:2008: EEN 1125:2008 (E) 2 Contents Page Foreword. 4 Introduction 5 1 Scope . 7 2 Normative references . 7 3 Terms and definitions. 7 4 Requirements 12 4.1 Design requirements 12 4.2 Performance requirements 20 4.3 Require
12、ments for product information. 25 5 Tests - General and test apparatus. 26 5.1 General. 26 5.2 Test apparatus 27 6 Test methods Procedures. 28 6.1 General. 28 6.2 Test procedure - Test sample A Environmental tests 29 6.3 Test procedure - Test sample B - Design and performance tests . 31 7 Classifica
13、tion. 36 7.1 Category of use (1st character). 36 7.2 Durability (2nd character) 36 7.3 Door mass (3rd character) . 36 7.4 Suitability for use on fire/smoke doors (4th character) 36 7.5 Safety (5th character) . 36 7.6 Corrosion resistance (6th character) 36 7.7 Security (7th character) 37 7.8 Project
14、ion of horizontal bar (8th character). 37 7.9 Type of horizontal bar operation (9th character). 37 7.10 Field of door application (10th character) 37 7.11 Example of classification. 37 8 Marking 38 8.1 On the product 38 8.2 On the packaging 38 8.3 On the installation instructions. 39 8.4 Mortise loc
15、k combined with a separate horizontal bar unit . 39 9 Evaluation of Conformity . 39 BS EN 1125:2008EN 1125:2008 (E) 3 9.1 Initial type test . 39 9.2 Sampling, testing and conformity criteria 40 9.3 Factory production control 41 9.4 Periodic testing (for all products) . 45 9.5 Annual testing (for all
16、 products) . 46 Annex A (normative) Installation and fixing instructions. 47 Annex B (normative) Additional requirements for panic exit devices intended for use on fire/smoke resisting door assemblies. 49 Annex C (normative) Maintenance instructions 50 Annex D (normative) Flow chart of test procedur
17、es . 51 Annex E (informative) Guidance for choosing relevant product standards for particular exit door applications 52 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 89/106/EEC, EU Construction Products Directive . 53 Bibliography .
18、 58 BS EN 1125:2008EN 1125:2008 (E) 4 Foreword This document (EN 1125:2008) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national
19、standard, either by publication of an identical text or by endorsement, at the latest by July 2008, and conflicting national standards shall be withdrawn at the latest by July 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.
20、CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1125:1997. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements
21、of EU Directive(s). For relationship with EU Directive 89/106/EEC, see informative Annex ZA which is an integral part of this document. It has been revised to incorporate clarification of the definitions, safety requirements and test procedures, in particular for panic exit devices intended for use
22、on double leaf doorsets, in order to allow for more reproducible test methods. It incorporates extension of the classification to avoid misuse of the products, extension of the limits of door mass and dimensions as well as extension of the field of door application to cover products already availabl
23、e on the market which were not covered by the 1997 edition of this European Standard. A full contribution to the preparation of this European Standard has been made by The European Federation of Associations of Lock and Builders Hardware Manufacturers (ARGE). This European Standard is part of a grou
24、p of standards dedicated to building hardware products. It is one of a group of standards for exit devices and exit systems developed by Technical Committee CEN/TC 33. Wherever reference is made to classes, they are considered to be technical classes and not classes according to Article 3(2) of the
25、Construction Products Directive (89/106/EEC). Verification or tests performed by mechanical test laboratory and fire test laboratory are listed in Table 1 summarizing performance characteristics and compliance criteria. According to the CEN/CENELEC Internal Regulations, the national standards organi
26、zations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Rom
27、ania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 1125:2008EN 1125:2008 (E) 5 Introduction Experience relating to escape from buildings, fire and/or smoke hazards and general safety has made it desirable that doors, in public areas, public buildings, places of public
28、 entertainment, shops etc, or those that have to be operated in a panic situation, be fitted with panic exit devices operated by a horizontal bar to common European Standard specifications. The main purpose of the performance requirements contained in this European Standard is to give safe and effec
29、tive escape through a doorway with one single operation by hand and/or body pressure to release the panic exit device, with minimum effort and without prior knowledge of the panic exit device. In this standard priority is given to the panic operation rather than pressure and resistance to the door o
30、pening from seals, weather-stripping, multiple bolt heads etc. Precedence is given to the importance of ease of opening by the young, elderly and infirm. In a panic situation, a group of people will react differently from an individual. When two or more people are rushing to an exit door located on
31、an escape route, probably in darkness and/or smoke, it is possible that the first one to reach the door will not necessarily operate the panic exit device, but can push the surface of the door (door under pressure) while other people will be trying to operate the horizontal bar by hand or body press
32、ure. See Figure 1. Whilst reasonable external security will be provided by the panic exit devices covered in this standard to avoid potential misuse of the device (chains, bolts, etc.), the main objective is to enable a door to be opened at all times by hand or body pressure along its inside face on
33、 the panic exit device and not requiring the use of a key or any other object. The performance tests incorporated in this European Standard are considered to be reproducible and, as such, will provide a consistent and objective assessment of the performance of these panic exit devices. Where emergen
34、cy exit devices are required for situations in which people are familiar with the use of the door hardware in their surroundings, where exit doors are required to be inwardly-opening, and/or where a panic situation is unlikely to develop, reference can be made to EN 179, covering emergency exit devi
35、ces. See definition 3.19. Where additional security is required for exit doors, reference should be made to prEN 13633 covering electrically controlled panic exit systems, or to prEN 13637 covering electrically controlled exit systems, for use on escape routes. See Bibliography. Due to the wide rang
36、e of panic exit devices, the reader is advised to refer to the scope and the detailed contents of this European Standard for coverage but, for information and general guide, this revised European Standard now deals with: panic exit devices designed to be used in panic situations; panic exit devices
37、for use on hinged or pivoted door leaves only; range of panic exit devices including those for use on double doorsets (see 7.10); two specific types of horizontal bar operation: panic exit devices with “push-bar“, type A (see 3.17 and Figure 2) and panic exit devices with “touch-bar“, type B (see 3.
38、19 and Figure 3); two categories of panic exit device projection in order to maximize the width of the escape route, and minimize the projection from the door face where either or both of these criteria are of importance (see 4.1.11); two specific designs of panic exit devices: those designed for us
39、e on single leaf doors only, and those specifically designed for use on single leaf doors and/or double doorsets. BS EN 1125:2008EN 1125:2008 (E) 6 This European Standard does not cover the following: any particular design of panic exit devices, and only such dimensions as are required for safety re
40、asons are specified; specific panic exit devices intended for use by the severely disabled (due to the wide range of disabilities, such panic exit devices and their performances should be agreed between specifier and producer); emergency exit devices operated by a lever handle or push-pad (see EN 17
41、9) or electrically controlled panic exit systems or electrically controlled exit systems (see prEN 13633 and prEN 13637). Figure 1 A panic situation BS EN 1125:2008EN 1125:2008 (E) 7 1 Scope This European Standard specifies requirements for the manufacture, performance and testing of panic exit devi
42、ces mechanically operated by either a horizontal push-bar or a horizontal touch-bar, specifically designed for use in a panic situation on escape routes. The suitability of a panic exit device for use on fire/smoke resisting door assemblies is determined by fire performance tests conducted in additi
43、on to the performance tests required by this European Standard. Annex B indicates additional requirements for these products. This European Standard covers panic exit devices which are either manufactured and placed on the market in their entirety by one producer or produced by more than one produce
44、r and subsequently placed on the market as a kit in a single transaction. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenc
45、ed document (including any amendments) applies. EN 179, Building hardware - Emergency exit devices operated by a lever handle or push pad - Requirements and test methods EN 1634-1, Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hard
46、ware - Part 1: Fire resistance test for doors and shutter assemblies and openable windows EN 1634-3, Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 3: Smoke control test for door and shutter assemblies EN 1670:2007,
47、Building hardware - Corrosion resistance - Requirements and test methods EN ISO 9001:2000, Quality management systems - Requirements (ISO 9001:2000) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 active leaf first opening and last closing le
48、af of a rebated single swing double doorset 3.2 automatic relatching device part of a panic exit device to enable the automatic securing of a door in the closed position, after it has been operated NOTE For example, a spring loaded latch bolt or an automatically thrown bolt head. BS EN 1125:2008EN 1
49、125:2008 (E) 8 3.3 bolt head portion of a panic exit device that engages with the keeper to secure the door in the closed position 3.4 dogging mechanism part of a panic exit device for holding the bolt head(s) in the withdrawn position until manually reset 3.5 doorset assembly consisting of a single leaf exit door being hinged or pivoted vertically in a frame 3.6 inactive leaf last opening and first closing leaf of a rebated single swing double doorset 3.7 inside face of the door on which the bar is situated for operating a panic exi
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1