EN 12094-6-2006 en Fixed firefighting systems - Components for gas extinguishing systems - Part 6 Requirements and test methods for nonelectrical disable devices《固定式消防系统 气体灭火系统的部件 .pdf

1、BRITISH STANDARDBS EN 12094-6:2006Fixed firefighting systems Components for gas extinguishing systems Part 6: Requirements and test methods for non-electrical disable devicesThe European Standard EN 12094-6:2006 has the status of a British StandardICS 13.220.20g49g50g3g38g50g51g60g44g49g42g3g58g44g5

2、5g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 12094-6:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2006 BS

3、I 2006ISBN 0 580 48804 7National forewordThis British Standard is the official English language version of EN 12094-6:2006. It supersedes BS EN 12094-6:2001 which is withdrawn.The UK participation in its preparation was entrusted by Technical Committee FSH/18, Fixed firefighting systems, to Subcommi

4、ttee FSH/18/6, Gaseous extinguishing media and systems, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in th

5、is document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a con

6、tract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals

7、for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 23 and a back cover.The BSI copyright notice displayed in this

8、 document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 12094-6April 2006ICS 13.220.20 Supersedes EN 12094-6:2000 English VersionFixed firefighting systems - Components for gas extinguishingsyste

9、ms - Part 6: Requirements and test methods for non-electrical disable devicesInstallations fixes de lutte contre lincendie - lmentsconstitutifs des installations dextinction gaz - Partie 6:Exigences et mthodes dessai pour dispositifs nonlectriques de mise hors serviceOrtsfeste Brandbekmpfungsanlagen

10、 - Bauteile frLschanlagen mit gasfrmigen Lschmitteln - Teil 6:Anforderungen und Prfverfahren fr nicht-elektrischeBlockiereinrichtungenThis European Standard was approved by CEN on 9 March 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions fo

11、r giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official ve

12、rsions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, C

13、yprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOM

14、IT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12094-6:2006: EEN 12094-6:2006 (E) 2 Contents Page Foreword 3 Introd

15、uction5 1 Scope .6 2 Normative references .6 3 Terms and definitions.6 4 Requirements 7 4.1 General design 7 4.2 Disabling valves8 4.3 Disable devices other than valves.8 4.4 Operating force .10 4.5 Documentation10 5 Type test methods 10 5.1 Conditions .10 5.2 Samples .11 5.3 Compliance11 5.4 Functi

16、on.11 5.5 Test for resistance to load11 5.6 Determination of operational force12 5.7 Test for resistance to corrosion 12 5.8 Test for resistance to stress corrosion .12 5.9 Vibration test .13 5.10 Operational reliability .13 6 Marking 13 7 Evaluation of conformity 14 7.1 General 14 7.2 Initial type

17、testing14 7.3 Factory production control (FPC)15 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive .19 ZA.1 Scope and relevant characteristics .19 ZA.2 Procedure for the attestation of conformity of non-electrical disable dev

18、ices20 ZA.3 CE Marking and labelling21 Bibliography.23 EN 12094-6:2006 (E) 3 Foreword This European Standard (EN 12094-6:2006) has been prepared by Technical Committee CEN/TC 191 “Fixed firefighting systems”, the secretariat of which is held by BSI. This European Standard shall be given the status o

19、f a national standard, either by publication of an identical text or by endorsement, at the latest by October 2006, and conflicting national standards shall be withdrawn at the latest by April 2009. This European Standard supersedes EN 12094-6:2000. This European Standard has been prepared under a m

20、andate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this European Standard. This European Standard is part of a se

21、ries concerned with gas extinguishing system components. The following European Standards are planned to cover: gas extinguishing systems (EN 12094), sprinkler systems (EN 12259 and EN 12845), powder systems (EN 12416), explosion protection systems (EN 26184), foam systems (EN 13565), hose systems (

22、EN 671), smoke and heat control systems (EN 12101), water spray systems (EN 14816). This standard has the general title “Fixed firefighting systems Components for gas extinguishing systems“ and will consist of the following parts: Part 1: Requirements and test methods for electrical automatic contro

23、l and delay devices, Part 2: Requirements and test methods for non-electrical automatic control and delay devices, Part 3: Requirements and test methods for manual triggering and stop devices, Part 4: Requirements and test methods for container valve assemblies and their actuators, Part 5: Requireme

24、nts and test methods for high and low pressure selector valves and their actuators, Part 6: Requirements and test methods for non-electrical disable devices, Part 7: Requirements and test methods for nozzles for CO2systems, EN 12094-6:2006 (E) 4 Part 8: Requirements and test methods for connectors,

25、Part 9: Requirements and test methods for special fire detectors, Part 10: Requirements and test methods for pressure gauges and pressure switches, Part 11: Requirements and test methods for mechanical weighing devices, Part 12: Requirements and test methods for pneumatic alarm devices, Part 13: Req

26、uirements and test methods for check valves and non-return valves, Part 16: Requirements and test methods for odorizing devices for CO2low pressure systems, Part 20: Requirements and test methods for the compatibility of components. According to the CEN/CENELEC Internal Regulations, the national sta

27、ndards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,

28、Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 12094-6:2006 (E) 5 Introduction It has been assumed in the preparation of this European Standard that the execution of its provisions is entrusted to appropriately qualified and experienced people. All pressure data in th

29、is European Standard are given as gauge pressures in bar, unless otherwise stated. NOTE 1 bar = 105N m-2= 100 kPa. EN 12094-6:2006 (E) 6 1 Scope This European Standard specifies requirements and test methods for non-electrical disable devices for CO2, Inert gas- or Halocarbon gas fire extinguishing

30、systems. Examples are: a) an isolating valve in the pipework to the flooding zone or in a pneumatic pilot line; b) a device blocking the actuator at the bank of containers or the container valve in single-zone installations or the actuator of selector valves in multiple-zone installations. 2 Normati

31、ve references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12094-5, Fixed firefigh

32、ting systems Components for gas extinguishing systems Part 5: Requirements and test methods for high and low pressure selector valves and their actuators EN 60068-2-6:1995, Environmental testing Part 2: Tests Tests Fc: Vibration (sinusoidal) (IEC 60068-2-6:1995 + Corrigendum 1995) EN ISO 9001:2000,

33、Quality management systems Requirements (ISO 9001:2000) 3 Terms and definitions For purposes of this European Standard, the following terms and definitions apply. 3.1 activated condition condition when the system operates after alarm 3.2 actuator component which causes a valve to operate 3.3 CO2-hig

34、h-pressure installation fire extinguishing installation in which the CO2is stored at ambient temperature. For example, the pressure of the CO2in storage is pabs= 58,6 bar at 21 C 3.4 CO2-low-pressure installation fire extinguishing installation in which the CO2is stored at low temperature, normally

35、19 C to -21 C 3.5 disabled state state of the non-electrical disable device, when operated and disabling the release of the extinguishing agent into the flooding zone EN 12094-6:2006 (E) 7 3.6 Halocarbon Gas extinguishing agent that contains as primary components one or more organic compounds contai

36、ning one or more of the elements fluorine, chlorine, bromine or iodine 3.7 Halocarbon Gas installation fire extinguishing installation in which the Halocarbon Gas is stored at ambient temperature 3.8 Inert Gas non liquefied gas or mixture of gases which extinguish the fire mainly by reducing the oxy

37、gen-concentration in the protected zone, such as Argon, Nitrogen or mixtures of these gases with CO23.9 Inert Gas installation fire extinguishing installation in which the Inert Gas is stored at ambient temperature 3.10 non-electrical disable device component that prevents any kind of unintentional

38、release (automatic or manual) of fire extinguishing systems during maintenance work in the protected room or object, without disabling the fire detection and alarm functions 3.11 operational state state of the non electrical disable device, when not operated and not disabling the release of the exti

39、nguishing agent into the flooding zone 3.12 quiescent condition condition when the system is ready to operate 3.13 working pressure pressure at which the component is used in the system 4 Requirements 4.1 General design 4.1.1 Disable devices except seals shall be made of metal. All mechanical parts

40、of the actuator shall be made of metal. Operating moving parts shall be manufactured of stainless steel, copper, copper alloy or corrosion-protected steel (e.g. galvanised steel). All materials shall be resistant to media with which they come into contact. 4.1.2 The non-electric disable device shall

41、 isolate either the mechanical and/or pneumatic release triggering or the flooding of a single zone. NOTE Guidelines for planning and installation may require that each flooding zone can be disabled separately. If the design of the non-electrical disable device prevents the disablement of each flood

42、ing zone in multi zone systems separately, the manufacturer shall limit the use of the component to single zone systems only. 4.1.3 The disabled and the operational states shall be clearly indicated. This indication shall be given at the non-electrical disable device itself. EN 12094-6:2006 (E) 8 Th

43、e non-electrical disable device shall be lockable in the disabled and operational states. 4.1.4 The non-electrical disable device shall not affect the fire detection and pre-warning alarms. The requirement is fulfilled, if compliance is made possible by the design. NOTE Guidelines for planning and i

44、nstallation may require that fire detection and pre-warning alarms are not affected, when the non-electrical disable device is in the disabled state. 4.1.5 The test sample shall comply with the technical description (drawings, parts list, description of functions, operating and installation instruct

45、ions) when checked in accordance with 5.3. 4.1.6 The component shall be specified by the manufacturer either for installation on walls only or for installation on both walls and machinery. 4.1.7 The non-electrical disable device shall be able to be reset from the disabled state to the operational st

46、ate, when the system is in the quiescent condition, and also when the system is in the activated condition. 4.2 Disabling valves Pilot line disabling valves shall vent any pressure from the pilot line to the atmosphere between disabling valve and the actuator when in the disable position. This may b

47、e done by using a 2-position, 3-port ball valve. NOTE Standards for planning and installation may require monitoring of the status of isolating valves. For valves in the pipework to the flooding zone and in pilot lines the requirements of 4.1, 4.4, 4.5 and Clause 6 of this European Standard and the

48、applicable clauses of EN 12094-5 shall apply. Applicable clauses of EN 12094-5 for selector valves covering the requirements and the relevant test methods shall be as follows: General design; Connection threads and flanges; Function and ambient temperature (requirements for opening and closing time

49、are not relevant); Internal pressure and leakage; Resistance to bursting; Operational reliability; Flow characteristics (only for valves in the pipework to the flooding zone); Corrosion; Stress corrosion; Vibration. 4.3 Disable devices other than valves 4.3.1 Connection threads Connection threads shall comply with European or International Standards for threads, e.g. ISO 7-1 and EN ISO 228-1. EN 12094-6:2006 (E) 9 4.3.2 Function The non-electrical disable device shall function, w