EN 12101-10-2005 en Smoke and heat control systems Part 10 Power supplies《烟和热控制系统 第10部分 电源》.pdf

1、BRITISH STANDARDBS EN 12101-10:2005Smoke and heat control systems Part 10: Power suppliesThe European Standard EN 12101-10:2005 has the status of a British StandardICS 13.220.99g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54

2、g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 12101-10:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 1 March 2006 BSI 1 March 2006ISBN 0 580 47901 3National forewordThis British Standard is the offic

3、ial English language version of EN 12101-10:2005. The UK participation in its preparation was entrusted to Technical Committee FSH/25, Smoke and heat control systems and components, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to i

4、ts secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic

5、Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understa

6、nd the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front

7、 cover, an inside front cover, the EN title page, pages 2 to 51 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 12101-10October

8、2005ICS 13.220.99English VersionSmoke and heat control systems - Part 10: Power suppliesSystmes pour le contrle des fumes et de la chaleur -Partie 10 : Equipement dalimentation en nergieRauch- und Wrmefreihaltung - Teil 10: EnergieversorgungThis European Standard was approved by CEN on 26 August 200

9、5.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on a

10、pplication to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has

11、 the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovak

12、ia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reservedworldwide for C

13、EN national Members.Ref. No. EN 12101-10:2005: EEN 12101-10:2005 (E) 2 Contents Page Foreword 4 Introduction6 1 Scope .7 2 Normative references .7 3 Terms, definitions and abbreviations8 3.1 Terms and definitions.8 3.2 Abbreviations 9 4 General requirements (electrical) 10 4.1 General 10 4.2 Batteri

14、es.11 4.3 Generator sets.11 5 General requirements (pneumatic)12 5.1 General 12 5.2 Power sources 12 6 Functions.15 6.1 Power supply from the primary power source (electrical).15 6.2 Power supply from the secondary power source (battery)15 6.3 Power supply from the secondary power source (generators

15、).16 6.4 Recognition and indication of faults (electrical).17 6.5 Power supply from compressed gases.18 7 Materials, design and manufacture .20 7.1 Mechanical design 20 7.2 Electrical design .20 8 Classification.20 9 Documentation21 9.1 Users documentation 21 9.2 Design documentation .22 10 Marking

16、22 10.1 General 22 10.2 Gas bottles 23 11 General test requirements23 11.1 Standard atmospheric conditions for testing.23 11.2 Mounting and orientation .23 11.3 Electrical connection 23 11.4 Selection of tests 23 12 Tests 26 12.1 Electrical functional test.26 12.2 Pneumatic functional test.28 12.3 T

17、est of the charger and the secondary power source .28 12.4 Cold (operational) .29 12.5 Damp heat, steady state (operational).30 12.6 Impact (operational)31 12.7 Vibration, sinusoidal (operational) 31 12.8 Damp heat, steady state (endurance)32 12.9 Vibration, sinusoidal (endurance)34 EN 12101-10:2005

18、 (E) 3 12.10 Dry heat (operational).34 12.11 SO2corrosion35 12.12 Salt spray testing 37 12.13 Protection against water 38 12.14 Protection against solid foreign objects .38 12.15 EMC immunity tests (operational) .39 13 Evaluation of conformity 40 13.1 General 40 13.2 Initial type testing .40 13.3 Fa

19、ctory production control (FPC)41 Annex A (informative) Summary of functions 45 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive .46 ZA.1 Scope and relevant characteristics .46 ZA.2 Procedure for attestation of conformity of

20、power supply equipment.47 ZA.2.1 System of attestation of conformity 47 ZA.2.2 EC Certificate and Declaration of conformity .48 ZA.3 CE marking and labelling .49 EN 12101-10:2005 (E) 4 Foreword This European Standard (EN 12101-10:2005) has been prepared by Technical Committee CEN/TC 191 “Fixed firef

21、ighting systems”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2006, and conflicting national standards shall be withdrawn at the latest by April

22、2006. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this E

23、uropean Standard. EN 12101 Smoke and heat control systems consists of the following: Part 1: Specification for smoke barriers, Part 2: Specification for natural smoke and heat exhaust ventilators, Part 3: Specification for powered smoke and heat exhaust ventilators, Part 4: Fire and smoke control in

24、stallations Kits, Part 6: Pressure differential systems Kits, Part 7: Smoke control ducts, Part 8: Specifications for smoke control dampers, Part 9: Control panels, Part 10: Power supplies. EN 12101 is included in a series of European Standards planned to cover also: Gas extinguishing systems (EN 12

25、094 and EN ISO 14520), Sprinkler systems (EN 12259), Powder systems (EN 12416), Explosion protection systems (EN 26184), Foam systems (EN 13565), Hose systems (EN 671), Water spray systems. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following count

26、ries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, EN 12101-10:2005 (E) 5 Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia,

27、Spain, Sweden, Switzerland and United Kingdom. EN 12101-10:2005 (E) 6 Introduction Smoke and heat control systems are used to protect people, buildings and/or building contents from the effects of smoke and heat in the event of fire. The most common systems are smoke and heat exhaust ventilation sys

28、tems (SHEVS) and pressure differential systems. Smoke and heat exhaust ventilation systems (SHEVS) create a smoke free layer above the floor by removing smoke and thus improve the conditions for the safe escape and/or rescue of people and animals and the protection of property and permit the fire to

29、 be fought while still in its early stages. They also exhaust hot gases released by a fire in the developing stage. The use of smoke and heat exhaust ventilation systems to create smoke free areas beneath a buoyant smoke layer has become widespread. Their value in assisting in the evacuation of peop

30、le from construction works, reducing fire damage and financial loss by preventing smoke logging, facilitating fire fighting, reducing roof temperatures and retarding the lateral spread of fire is firmly established. For these benefits to be obtained it is essential that smoke and heat exhaust ventil

31、ators operate fully and reliably whenever called upon to do so during their installed life. A heat and smoke exhaust ventilation system is a scheme of safety equipment intended to perform a positive role in a fire emergency. Components for smoke and heat exhaust systems should be installed as part o

32、f a properly designed smoke and heat system. Smoke and heat exhaust ventilation systems help to: keep the escape and access routes free from smoke; facilitate fire fighting operations by creating a smoke free layer; delay and/or prevent flashover and thus full development of the fire; protect buildi

33、ngs, equipment and furnishings; reduce thermal effects on structural components during a fire; reduce damage caused by thermal decomposition products and hot gases. Pressure differential systems are used to either positively pressurise spaces separated from the fire or to depressurise the space cont

34、aining the fire in order to limit or prevent the flow of smoke and heat into adjacent spaces. A typical use would be to pressurise an escape stair well in order to protect vertical means of escape. Depending on the design of the system, natural or powered smoke and heat ventilation can be used in a

35、smoke and heat control system. Power supply equipment for a smoke and heat control system may be for pneumatic systems, low voltage or extra low voltage electrical systems, or a combination of any of these. Smoke and heat control system power supplies may also provide power for day to day ventilatio

36、n and for other fire safety equipment under fire conditions. EN 12101-10:2005 (E) 7 1 Scope This European Standard specifies requirements and gives test methods for primary and secondary electrical and pneumatic power supply equipment, designed for use in smoke and heat control systems in buildings.

37、 It also provides for the evaluation of conformity of such equipment to the requirements of this European Standard. NOTE A summary of functions is given in Annex A. 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated re

38、ferences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 286-1, Simple unfired pressure vessels designed to contain air or nitrogen Part 1: Pressure vessels for general purposes EN 1964-1, Transportable gas

39、 cylinders Part 1: Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres. Cylinders made of seamless steel with an Rmvalue of less than 1100 MPa prEN 12101-9, Smoke and heat control sys

40、tems Part 9: Control panels EN 12205, Transportable gas cylinders Non-refillable metallic gas cylinders EN 13293, Transportable gas cylinders Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity up to 0,5

41、 litre for compressed, liquefied and dissolved gases and up to 1 litre for carbon dioxide EN 50130-4, Alarm systems Part 4: Electromagnetic compatibility Product family standard: Immunity requirements for components of fire, intruder and social alarm systems EN 60068-1, Environmental testing Part 1:

42、 General and guidance (IEC 60068-1:1988 + Corrigendum 1988 + A1:1992) EN 60068-2-1, Environmental testing Part 2-1: Test methods Tests A: Cold (IEC 60068-2-1:1990) EN 60068-2-6, Environmental testing Part 2-6: Test methods Test Fc: Vibration (sinusoidal) (IEC 60068-2-6:1990 + Corrigendum 1995) EN 60

43、068-2-47, Environmental testing Part 2-47: Test methods Mounting of components, equipment and other articles for vibration, impact and similar dynamic tests (IEC 60068-2-47:1999) EN 60068-2-52:1996, Environmental testing Part 2-52 Test methods Test Kb, salt mist cyclic (sodium chloride solution (IEC

44、 60068-2-52:1996) EN 60068-2-75, Environmental testing Part 2-75: Tests Test Eh: Hammer tests (IEC 60068-2-75:1997) EN 60068-2-78, Environmental testing Part 2-78: Tests Test Cab: Damp heat, steady state (IEC 60068-2-78:2001) EN 60204-1, Safety of machinery Electrical equipment of machines Part 1: G

45、eneral requirements (IEC 60204-1:1997) EN 60529, Degrees of protection provided by enclosures (IP code) (IEC 60529:1989) EN 12101-10:2005 (E) 8 EN ISO 6988, Metallic and other non-organic coatings Sulphur dioxide test with general condensation of moisture (ISO 6988:1985) EN ISO 9001:2000, Quality ma

46、nagement systems Requirements (ISO 9001:2000) EN ISO 12100-1, Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-2, Safety of machinery Basic concepts, general principles for design Part 2: Technical principles (IS

47、O 12100-2:2003) ISO 8528-1, Reciprocating internal combustion engine driven alternating current generating sets Part 1: Application, ratings and performance ISO 8528-2, Reciprocating internal combustion engine driven alternating current generating sets Part 2: Engines ISO 8528-3, Reciprocating inter

48、nal combustion engine driven alternating current generating sets Part 3: Alternating current generators for generating sets ISO 8528-4, Reciprocating internal combustion engine driven alternating current generating sets Part 4: Control gear and switch gear ISO 8528-5:1993, Reciprocating internal com

49、bustion engine driven alternating current generating sets Part 5: Generating sets ISO 8528-6, Reciprocating internal combustion engine driven alternating current generating sets Part 6: Test methods ISO 8528-7, Reciprocating internal combustion engine driven alternating current generating sets Part 7: Technical declarations for specification and design ISO 8528-10, Reciprocating internal combustion engine driven alternating current generating sets Part 10: Measurement