EN 12209-2016 en Building hardware - Mechanically operated locks and locking plates - Requirements and test methods《建筑五金-机械锁和锁板-要求和试验方法》.pdf

1、BS EN 12209:2016Building hardware Mechanically operatedlocks and locking plates Requirements and testmethodsBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 12209:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 12209:20

2、16. It supersedes BS EN 12209:2003 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee B/538/4, Building hardware.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include

3、 all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016 .Published by BSI Standards Limited 2016ISBN 978 0 580 86091 1 ICS 91.190 Compliance with a British Standard cannot confer immunity from legal obligations.This Briti

4、sh Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 12209:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12209 March 2016 ICS 91.190 Supersedes EN 12209:

5、2003English Version Building hardware - Mechanically operated locks and locking plates - Requirements and test methods Quincaillerie pour le btiment - Serrures mcaniques et gches - Exigences et mthodes dessai Schlsseer und Baubeschlge - Mechanisch bettigte Schlsser und Schliebleche - Anforderungen u

6、nd Prfverfahren This European Standard was approved by CEN on 8 November 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bib

7、liographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respo

8、nsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Rep

9、ublic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMA

10、LISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12209:2016 EBS EN 12209:2016EN 12209:2016 (E) 2 Contents PageEuropean for

11、eword . 6 Introduction 8 1 Scope 9 2 Normative references 9 3 Terms and definitions 10 4 Requirements 12 4.1 General . 12 4.1.1 Essential characteristics 12 4.1.2 Dangerous substances 12 4.1.3 Return force of latch bolt . 13 4.1.4 Product information requirements . 13 4.1.5 Strength of lever lock ke

12、y 13 4.1.6 Strength of bolt actions 14 4.1.7 Minimum follower restoring torque . 14 4.1.8 Protection against removal from door . 14 4.2 Category of use (first digit) . 14 4.2.1 Resistance to side force on latch bolt 14 4.2.2 Torque to operate the lock . 15 4.2.3 Strength of follower stops . 16 4.2.4

13、 Torque resistance for lockable deadbolt operation by handle/knob. 16 4.3 Durability requirements (second digit) . 18 4.3.1 Durability of latch action . 18 4.3.2 Durability of deadbolt mechanism 18 4.3.3 Durability of locking snib mechanism 18 4.4 Door mass and door closing force (third digit) . 18

14、4.4.1 Door mass . 18 4.4.2 Door closing force 18 4.5 Suitability for use on fire resistance and/or smoke control doorset (fourth digit) 19 4.6 Safety (fifth digit) . 19 4.7 Corrosion resistance and temperature (sixth digit) . 19 4.7.1 Corrosion resistance . 19 4.7.2 Operation at extreme temperatures

15、 . 19 4.8 Security (seventh digit) 19 4.8.1 General . 19 4.8.2 Locking . 19 4.8.3 Manual deadlocking 19 4.8.4 Torque resistance of knob of tubular lock 20 4.8.5 Requirements for side force . 20 4.8.6 Deadbolt projection 21 4.8.7 Resistance to force in the unlocking direction (disengaging force) 22 4

16、.8.8 Requirements for pulling of anti-separation bolt 23 4.8.9 Requirements for anti-lifting devices in sliding door locks . 24 4.8.10 Requirement for torque resistance of lockable followers 25 4.8.11 Strong key attack on lever locks . 26 BS EN 12209:2016EN 12209:2016 (E) 3 4.8.12 Resistance to forc

17、e on box protected locking plates 26 4.8.13 Resistance to side force on locking plates . 27 4.8.14 Resistance to pulling on locking plates. 27 4.8.15 Resistance to lifting force on locking plates . 27 4.9 Key identification requirements of lever locks (eight digit) 30 4.9.1 Minimum number of detaini

18、ng elements 30 4.9.2 Minimum number of effective differs 30 4.9.3 Differing steps height on key 30 4.9.4 Non-interpassing of keys with just one interval differ . 30 4.9.5 Coding protection . 30 5 Test, assessment and sampling methods . 31 5.1 General . 31 5.2 Test apparatus . 32 5.2.1 Test door 32 5

19、.2.2 Drill machine 32 5.2.3 Test fixtures 32 5.3 Test procedure - Drilling procedure 32 5.4 Test methods - general . 33 5.4.1 Dangerous substances verification 33 5.4.2 Return force of latch bolt . 33 5.4.3 Product information requirements verification . 33 5.4.4 Strength of lever lock key 33 5.4.5

20、Strength of bolt action . 33 5.4.6 Minimum follower restoring torque 34 5.4.7 Protection against removal from door . 34 5.5 Test methods - Category of use 34 5.5.1 Resistance to side force on latch bolt 34 5.5.2 Torque to operate the lock 36 5.5.3 Strength of follower stops . 36 5.5.4 Torque resista

21、nce for lockable deadbolt operation by handle/knob . 36 5.6 Test methods - durability 37 5.6.1 Durability of latch action without force applied . 37 5.6.2 Durability of latch action with force applied 38 5.6.3 Durability of deadbolt mechanism . 40 5.6.4 Durability of locking snib mechanism 41 5.7 Do

22、or mass and closing force . 41 5.7.1 Door mass verification 41 5.7.2 Door closing force . 41 5.8 Suitability for use on fire resistance and/or smoke control doorset 42 5.9 Safety . 42 5.10 Corrosion resistance and temperature 42 5.10.1 Corrosion resistance 42 5.10.2 Operation at extremes of temperat

23、ure . 42 5.11 Security . 43 5.11.1 Key operation and locking 43 5.11.2 Torque resistance of knob of tubular lock test 44 5.11.3 Resistance to side force 44 5.11.4 Deadbolt projection measure. 47 5.11.5 Resistance to forcing in the unlocking direction (disengaging force) test 47 5.11.6 Resistance to

24、pulling of anti-separation bolt test . 49 5.11.7 Resistance to forcing of locating device in sliding door locks 50 5.11.8 Torque resistance for lockable deadbolt operation by handle/knob test . 50 BS EN 12209:2016EN 12209:2016 (E) 4 5.11.9 Strong key attack on locks with internal blocking elements .

25、 51 5.11.10 Resistance to end force on box protected locking plate test 51 5.11.11 Resistance to side force on locking plate test 51 5.11.12 Resistance to pulling on locking plate 52 5.11.13 Resistance to lifting force on locking plate . 52 5.12 Key related security for lever locks . 53 5.12.1 Detai

26、ning elements verification . 53 5.12.2 Effective differs verification . 53 5.12.3 Differing step heights on key . 53 5.12.4 Non-interpassing of keys with just one interval differ . 53 5.12.5 Coding protection . 53 6 Assessment and verification of constancy of performance AVCP 53 6.1 General . 53 6.2

27、 Type testing 54 6.2.1 General . 54 6.2.2 Test samples, testing and compliance criteria 55 6.2.3 Test reports 55 6.2.4 Shared other party results 55 6.2.5 Cascading determination of the product type results 56 6.3 Factory production control (FPC) 57 6.3.1 General . 57 6.3.2 Requirements 57 6.3.3 Pro

28、duct specific requirements 60 6.3.4 Initial inspection of factory and of FPC 60 6.3.5 Continuous surveillance of FPC . 61 6.3.6 Procedure for modifications 61 7 Classification 61 7.1 Coding system 61 7.2 Classification for mechanically operated locks and locking plates . 61 7.2.1 Category of use (fi

29、rst digit) . 61 7.2.2 Durability (second digit) . 62 7.2.3 Door mass and closing force (third digit) 62 7.2.4 Suitability for use on fire resisting and/or smoke control doorset (fourth digit) . 62 7.2.5 Safety (fifth digit) . 63 7.2.6 Corrosion resistance and temperature (sixth digit) . 63 7.2.7 Sec

30、urity and drill resistance (seventh digit) 63 7.2.8 Key identification of lever locks (eight digit) 64 7.3 Example for classification of locks, latches and their locking plates 64 8 Marking, labelling and packaging 64 8.1 On the product . 64 8.2 On the packaging 65 8.3 On the installation instructio

31、n 65 Annex A (normative) Locks and locking plates for use on fire resisting and/or smoke control doorset 66 A.1 Grade A . 66 A.2 Grade B . 66 A.3 Grade N . 66 Annex B (normative) Test sampling and sequencing for locks and latches 68 Annex C (informative) Product information . 71 BS EN 12209:2016EN 1

32、2209:2016 (E) 5 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation (305/2011) 73 ZA.1 Scope and relevant characteristics 73 ZA.2 Procedure for AVCP of locks and locking plates 74 ZA.2.1 System(s) of AVCP . 74 ZA.2.2 Declarati

33、on of performance (DoP) . 75 General . 75 ZA.2.2.1Content . 75 ZA.2.2.2Example of DoP . 77 ZA.2.2.3ZA.3 CE marking and labelling . 78 Bibliography . 81 BS EN 12209:2016EN 12209:2016 (E) 6 European foreword This document (EN 12209:2016) has been prepared by Technical Committee CEN/TC 33 “Doors, windo

34、ws, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR. This document supersedes EN 12209:2003. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2

35、016, and conflicting national standards shall be withdrawn at the latest by December 2017. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU

36、 Directive(s), see informative Annex ZA, which is an integral part of this document. This European Standard is one of a series of European Standards dedicated to building hardware products. European standards for electromechanically operated locks and locking plates (EN 14846) and for mechanically o

37、perated multi-point locks (prEN 15685) are also available. The performance tests incorporated in this standard are considered to be reproducible and as such provide a consistent and objective assessment of the performance of these products throughout CEN Members. The major changes in this revision a

38、re as follows: a) the type of lock that has been named latch is now integrated in the definition of locks;b) the number of classification has been reduced1) field of door application have been integrated in product information;2) type of key operation and locking is moved to Security and drill resis

39、tance;3) type of spindle operation have been integrated in product information;c) suitability for use on fire resistance and/or smoke control doorset introduces new classification.Grade 0, A, B and N is shown in Annex A;d) temperature range changed to 10 C to +60 C;e) requirements, test methods, for

40、ces, torques, figures and tables have been renumbered;f) new requirement for product information have been added;g) grades for durability with 10 N side force is deleted;h) the document EN 12209:2003/AC:2005 has been integrated in this issue;BS EN 12209:2016EN 12209:2016 (E) 7 i) assessment and veri

41、fication of constancy of performance AVCP have replaced Evaluation ofconformity1) Annex ZA has been rewritten to include CPR format.NOTE A lock conforming to this European Standard can at the same time be part of an exit device in accordance with EN 179 or EN 1125. Attention is drawn to the possibil

42、ity that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are b

43、ound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portu

44、gal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 12209:2016EN 12209:2016 (E) 8 Introduction Mechanically operated locks and their locking plates used in fire resistant and/or smoke control door assemblies require additional attributes in order to con

45、form to the Essential Requirement “Safety in case of fire” as a part of a complete assembly. Additional requirements for locks and their locking plates used on fire resistant and/or smoke control door assemblies are specified in Annex A. This European Standard for mechanically operated locks and the

46、ir locking plates specifies requirements and test methods for durability, strength, security, and functionality and they are for use on doors, in buildings; for use on fire and smoke compartmentation doors fitted with door closing devices, to enable such doors to close reliably and thus achieve self

47、-closing in the event of fire; and for use on locked fire doors to maintain the fire integrity of the door assembly. This standard specifies locks and locking systems intended for use in different environmental and security conditions, thus necessitating different grades. This European Standard spec

48、ifies the dimensions and properties required for security and for the assessment of fire resistance and/or smoke control door suitability. This European Standard does not specify any particular design or installation. BS EN 12209:2016EN 12209:2016 (E) 9 1 Scope This European Standard specifies requi

49、rements and test methods for durability, strength, security and functionality of mechanically operated locks and their locking plates: a) for use in doors in buildings;b) for use on fire and smoke compartmentation doors fitted with door closing devices, to enable suchdoors to close reliably and thus achieve self-closing in the event of fire; andc) for use on locked fire doors to maintain the fire integrity of the door assembly.This European Standard covers locks and their locking plates which are either manufactured and placed on the market in their entir