EN 12312-16-2005 en Aircraft ground support equipment - Specific requirements - Part 16 Air start equipment (Incorporates Amendment A1 2009)《航空地面辅助设备 特殊要求 第16部分 空中启动设备 包含修改件A1-2009.pdf

1、BRITISH STANDARDBS EN 12312-16:2005Aircraft ground support equipment Specificrequirements Part 16: Air start equipmentICS 49.100g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g

2、60g53g44g42g43g55g3g47g36g58+A1:2009BS EN 12312-16:2005+A1:2009ISBN 978 0 580 61080 6Amendments/corrigenda issued since publicationDate Comments 31 October 2009 Implementation of CEN amendment A1:2009National forewordThis British Standard is the UK implementation of EN 12312-16:2005+A1:2009. It supe

3、rsedes BS EN 12312-16:2005, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK particip

4、ation in its preparation was entrusted to Technical Committee ACE/57, Air cargo and ground support equipment.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. User

5、s are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 27 February 2006 BSI 2009EUROPEAN STANDARD NORME EUROPENNE EUROPISC

6、HE NORM EN 12312-16:2005+A1 April 2009 ICS 49.100 Supersedes EN 12312-16:2005English Version Aircraft ground support equipment - Specific requirements - Part 16: Air start equipment Matriel au sol pour aronefs - Exigences particulires - Partie 16: Matriels de dmarrage air Luftfahrt-Bodengerte - Beso

7、ndere Anforderungen - Teil 16: Luftstartgerte This European Standard was approved by CEN on 13 June 2005 and includes Amendment 1 approved by CEN on 1 March 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standar

8、d the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French,

9、German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Cze

10、ch Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUR

11、OPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12312-16:2005+A1:2009: EEN 12312-16:2005+A1:2009 (E) 2 Contents Page For

12、eword 3Introduction . 41 Scope 52 Normative references 53 Terms and definitions . 64 List of hazards 65 Safety requirements and/or measures 75.1 General requirements 75.2 Stored air systems . 75.3 Diesel powered air start units . 75.3.1 Power source . 75.3.2 Air compressor 75.3.3 Air delivery system

13、 85.4 Turbine powered air start units 85.4.1 Power source . 85.4.2 Air compressor 85.4.3 Air delivery system 85.5 Air delivery hoses 85.6 Controls, monitoring devices and displays 95.7 Options . 96 Information for use 96.1 Marking . 96.2 Additional marking 96.3 Instructions 97 Verification of requir

14、ements . 10Annex A (informative) Examples of air start units . 11Annex B (normative) List of hazard in addition to those of EN 1915-1 . 13Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC . 14Annex ZB (informative) !Relationshi

15、p between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ . 15Bibliography 16BS EN 12312-16:2005+A1:2009EN 12312-16:2005+A1:2009 (E) 3 Foreword This document (EN 12312-16:2005+A1:2009) has been prepared by Technical Committee CEN/TC 274 “Aircraft ground support equi

16、pment“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2009, and conflicting national standards shall be withdrawn at the latest by December 2009.

17、 This document includes Amendment 1, approved by CEN on 2009-03-01. This document supersedes EN 12312-16:2005. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This European Standard has been prepared under a mandate given to CEN by the European C

18、ommission and the European Free Trade Association and supports essential requirements of EU Directive(s). !For relationship with EU Directives, see informative Annexes ZA and ZB, which are integral parts of this document.“ The Parts of EN 12312 Aircraft ground support equipment Specific requirements

19、 are: Part 1: Passenger stairs Part 2: Catering vehicles Part 3: Conveyor belt vehicles Part 4: Passenger boarding bridges Part 5: Aircraft fuelling equipment Part 6: Deicers and deicing/antiicing equipment Part 7: Air-craft movement equipment Part 8: Maintenance stairs and platforms Part 9: Contain

20、er/Pallet loaders Part 10: Container/Pallet transfer transporters Part 11: Container/Pallet dollies and loose load trailers Part 12: Potable water service equipment Part 13: Lavatory service equipment Part 14: Disabled/Incapacitated passenger boarding equipment Part 15: Baggage and equipment tractor

21、s Part 16: Air start equipment Part 17: Air conditioning equipment Part 18: Nitrogen or Oxygen units Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions Part 20: Ground power equipment According to the CEN/CENELEC Internal Regulations, the national standards organizations of the follow

22、ing countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slove

23、nia, Spain, Sweden, Switzerland and United Kingdom. BS EN 12312-16:2005+A1:2009EN 12312-16:2005+A1:2009 (E) 4 Introduction This European Standard specifies health and safety requirements, as well as some functional and performance requirements for air start equipment intended for servicing all aircr

24、aft types commonly in service in civil air transport. The minimum essential criteria are considered to be of primary importance in providing safe, serviceable, economical and practical air start equipment. Deviations from the recommended criteria should occur only after careful consideration, extens

25、ive testing, risk assessment and thorough service evaluation have shown alternative methods or conditions to be satisfactory. This European Standard is a Type C standard as stated in EN ISO 12100. The machinery concerned and the extent to which hazards, hazardous situations and events are covered ar

26、e indicated in the scope of this European Standard. When provisions of this type C standard differ from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built a

27、ccording to the provisions of this type C standard. BS EN 12312-16:2005+A1:2009EN 12312-16:2005+A1:2009 (E) 5 1 Scope This European Standard specifies the technical requirements to minimise the hazards listed in Clause 4 which can arise during the commissioning, operation and maintenance of air star

28、t equipment when carried out in accordance with the specifications given by the manufacturer or his authorised representative. It also takes into account some performance requirements recognised as essential by authorities, aircraft and ground support equipment (GSE) manufacturers as well as airline

29、s and handling agencies. This European Standard applies to the following types of air start equipment used for civil aircraft: stored air systems without compressors; mobile diesel powered air start units; mobile turbine powered air start units; air delivery systems of ramp or passenger boarding bri

30、dges, as defined in Clause 3 (Examples see Annex A). This European Standard does not establish requirements for the pressure vessels included in the air start equipment. This European Standard does not establish requirements for noise and vibration. Noise and vibration are dealt with respectively in

31、 EN 1915-4 and EN 1915-3. This European Standard does not deal with hazards in respect to a standard automotive chassis and from other vehicles on the apron. This Part of EN 12312 is not applicable to air start equipment which is manufactured before the date of publication of this European Standard

32、by CEN. !This part of EN 12312 is intended to be used in conjunction with EN 1915-1, EN 1915-2, EN 1915-3 (for vehicles) and EN 1915-4.“ 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition c

33、ited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. !deleted text“ EN 1012-1, Compressors and vacuum pumps Safety requirements Part 1: Compressors EN 1050:1996, Safety of machinery Principles for risk assessment EN 1915-1:2001, Airc

34、raft ground support equipment General requirements Part 1: Basic safety requirements EN 1915-2, Aircraft ground support equipment General requirements Part 2: Stability and strength requirements, calculations and test methods !EN 1915-3, Aircraft ground support equipment General requirements Part 3:

35、 Vibration measurement methods and reduction“ !EN 1915-4, Aircraft ground support equipment General requirements Part 4: Noise measurement methods and reduction“ EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for design Part 1: Basic termi-nology, methodology (ISO 12100-

36、1:2003) BS EN 12312-16:2005+A1:2009EN 12312-16:2005+A1:2009 (E) 6 EN ISO 12100-2:2003, Safety of machinery Basic concepts, general principles for design Part 2: Technical principles (ISO 12100-2:2003) !EN ISO 13850:2008, Safety of machinery Emergency stop Principles for design (ISO 13850:2006)“ ISO

37、2026, Aircraft Connections for starting engines by air 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given EN 1915-1:2001 and EN ISO 12100:2003 together with the following apply. 3.1 air start equipment ground support equipment (GSE) to start aircraft

38、main engines by means of compressed air, including hoses and couplers 3.2 air start unit self-contained air start equipment 3.2.1 stored air system mobile air start equipment with pressure vessels containing compressed air 3.2.2 diesel powered air start unit mobile air start unit with a diesel engin

39、e as the power source 3.2.3 turbine powered air start unit mobile air start unit with a turbine as the power source 3.3 air delivery system all parts of the air start equipment controlling and delivering compressed air to the aircraft ground connecting point. On systems installed on ramps or passeng

40、er boarding bridges this is limited to hoses, couplings and end valves 3.4 compressor machine to compress air, gases or vapours to a pressure higher than the inlet pressure 4 List of hazards The list of risks and hazards (see Annex B) is based on EN 1050 and contains the hazards and hazardous situat

41、ions, as far as they are dealt with in this European Standard, identified by risk assessment as significant for air start equipment and which require action to eliminate or reduce risks. BS EN 12312-16:2005+A1:2009EN 12312-16:2005+A1:2009 (E) 7 5 Safety requirements and/or measures 5.1 General requi

42、rements 5.1.1 !Air start equipment shall conform to the relevant requirements of EN 1915-1, EN 1915-2, EN 1915-3 and EN 1915-4 unless otherwise specified in this standard.“ It shall also conform to the specific requirements of this European Standard. 5.1.2 Stability and strength calculations shall b

43、e carried out in accordance with EN 1915-2. 5.1.3 The overall dimensions of the air start unit shall be kept to a minimum. NOTE See also Clause 0 of EN 1915-1:2001 negotiation. 5.1.4 Self-propelled air start units shall be equipped with driver accommodation. 5.1.5 Air start equipment shall be equipp

44、ed with a suitable air delivery regulator to protect the aircraft system from over-pressure or loss of pressure during aircraft engine start procedure. NOTE See also Clause 0 of EN 1915-1:2001 negotiation. 5.1.6 For air start equipment with more than one air delivery hose a system shall be installed

45、 to prevent each spare hose being pressurized e.g. an interlock within the storage receptacle for the hose coupling, activated by removal of the coupling. 5.1.7 Air start equipment shall have a pressure relief valve to prevent over-pressurization of the system. The exhaust from the relief valve shal

46、l be directed away from work areas, e.g. vertically downwards or upwards. 5.2 Stored air systems 5.2.1 Pressure vessels and components shall be securely fitted to the chassis of the air start unit, to avoid rela-tive movement between unit and chassis, working loose, wear and tear. 5.2.2 An adjustabl

47、e air pressure valve shall be installed to fix the air delivery characteristics in accordance with the aircraft engine type. 5.3 Diesel powered air start units 5.3.1 Power source 5.3.1.1 The power source shall be sufficient to start all aircraft engines for which the unit is designed. 5.3.1.2 The en

48、gine shall be protected against low oil pressure and overheating. 5.3.1.3 During aircraft engine start procedure these safety systems shall be automatically overridden in order to avoid aircraft engine damage. 5.3.1.4 The air start unit shall be equipped with a suitable governor to regulate the spee

49、d of the engine. 5.3.2 Air compressor 5.3.2.1 In steady state, the compressor shall maintain the necessary air flow and pressure for the aircraft engine start procedure, measured at the end of the intended hose. 5.3.2.2 An adjustable air pressure valve shall be installed to fix the air delivery characteristics in accordance with the aircraft engine type and environmental conditions. Information about the adjusted pressure and flow shall be provided. 5.3.2.3 Co