1、BRITISH STANDARD BS EN 1248:2001 Foundry machinery Safety requirements for abrasive blasting equipment ICS 2 .120.30 +A1:2009 5National foreword This British Standard is the UK implementation of EN 1248:2001+A1:2009. It supersedes BS EN 1248:2001 which is withdrawn. The start and finish of text intr
2、oduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“. The UK participation in its preparation was entrusted by Technical Committee MCE/3, Safeguardi
3、ng of machinery, to Subcommittee MCE/3/10, Foundry machinery Safety. A list of organizations represented on this subcommittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct ap
4、plication. Compliance with a British Standard cannot confer immunity from legal obligations. BS EN 1248:2001+A1:2009 Amendments/corrigenda issued since publication Date Comments 30 June 2009 Implementation of CEN amendment A1:2009 This British Standard was published under the authority of the Standa
5、rds Committee and comes into effect on 15 June 2001 BSI 2009 ISBN 978 0 580 61494 1 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1248:2001+A1 April 2009 ICS 25.120.30 Supersedes EN 1248:2001 English Version Foundry machinery - Safety requirements for abrasive blasting equipment Machines de f
6、onderie - Prescriptions de scurit pour quipements de grenaillage Gieereimaschinen - Sicherheitsanforderungen fr Strahlanlagen This European Standard was approved by CEN on 8 March 2001 and includes Amendment 1 approved by CEN on 1 March 2009. CEN members are bound to comply with the CEN/CENELEC Inte
7、rnal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN mem
8、ber. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN memb
9、ers are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
10、Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref.
11、 No. EN 1248:2001+A1:2009: EEN 1248:2001+A1:2009 (E) 2 Contents Page Foreword 4 Introduction .5 1 Scope 5 2 Normative references 6 3 Terms and definitions .7 4 !List of significant hazards“ 8 5 Safety requirements and/or measures 9 5.1 !General“ .9 6 Verification of the safety requirements and/or me
12、asures 24 7 Information for use . 24 7.1 !General . 24 7.2 Warning devices and safety signs 24 7.3 Marking 25 7.4 Accompanying documents“ 25 8 Maximum concentration of hazardous substances in shot blasting abrasives 27 Annex A (normative) Description of equipment covered by this standard 28 Annex B
13、(informative) Illustrative solutions for safety measures of blasting equipment 29 Annex ZA (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC“ 37 Annex ZB (informative) !Relationship between this European Standard and the Essential Requ
14、irements of EU Directive 2006/42/EC“ 38 Bibliography . 39 Figures Figure B.1 Processing scheme with abrasive blasting media preparation (see 3.2)“ . 29 Figure B.2 Shot blast wheel cover safety device (see 5.2) . 30 Figure B.3 Shot blast wheel cover safety device (see 5.2) . 31 Figure B.4 Safety meas
15、ures against the propelling of abrasive blasting media (see 5.3.1.2) 32 Figure B.5 Blasting chamber door (see 5.3.1.3 and 5.3.1.5) 33 Figure B.6 Door locking (see 5.3.1.3) . 34 Figure B.7 Safety catch of loading flap (see 5.6.1) . 35 Figure B.8 Fixed guard (see 5.7.1) . 36 BS EN 1248:2001+A1:2009EN
16、1248:2001+A1:2009 (E) 3 Tables !Table 1 Significant hazards, hazardous situations, safety requirements and/or measures“ . 11 BS EN 1248:2001+A1:2009EN 1248:2001+A1:2009 (E) 4 Foreword This document (EN 1248:2001+A1:2009) has been prepared by Technical Committee CEN/TC 202 “Foundry machinery“, the se
17、cretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. This document
18、 includes Amendment 1, approved by CEN on 2009-03-01. This document supersedes EN 1248:2001. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This European Standard has been prepared under a mandate given to CEN by the European Commission and the
19、European Free Trade Association, and supports essential requirements of EC Directive(s). !For relationship with EC Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ An assessment of the foreseeable risks arising from the use of the equipment was carried out
20、 when this standard was drafted by CEN/TC 202/WG 4, comprising experts from the following countries: France, Germany, Italy, Sweden and United Kingdom. Annex A is normative, and Annex B is informative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the fol
21、lowing countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Sl
22、ovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 1248:2001+A1:2009EN 1248:2001+A1:2009 (E) 5 Introduction !This European Standard is a type C standard as stated in EN ISO 12100. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indic
23、ated in the scope of this European Standard. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built a
24、ccording to the provisions of this type C standard. Where for clarity an example of a preventative measure is given in the text, this should not be considered as the only possible solution. Other solutions can be used as far as they fulfil correctly the criteria expressed in the requirement. This Eu
25、ropean Standard assumes, that the equipment is operated and maintained by trained personnel.“ 1 Scope This standard specifies requirements to be met by the manufacturer of abrasive blasting equipment for the foreseeable significant hazards due to design, construction and installation, during commiss
26、ioning, operation, maintenance and decommissioning of the equipment which employ either centrifugal force or compressed air as a means of accelerating abrasive to achieve the desired result. Abrasive blasting equipment covers: centrifugal blasting machines; air blasting machines; loading, conveying
27、and unloading systems for the workpieces. See Annex A for more details. This standard covers all foreseeable significant hazards which could be encountered during the lifetime of the machine as listed in clause 5. This standard does not apply to: mobile centrifugal blasting equipment; mobile air bla
28、sting equipment; wet blasting equipment; the general works compressed air supply system. BS EN 1248:2001+A1:2009EN 1248:2001+A1:2009 (E) 6 2 Normative references !The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited a
29、pplies. For undated references, the latest edition of the referenced document (including any amendments) applies.“ !EN 286-1, Simple unfired pressure vessels designed to contain air or nitrogen Part 1: Pressure vessels for general purposes EN 349, Safety of machinery Minimum gaps to avoid crushing o
30、f parts of the human body EN 620, Continuous handling equipment and systems Safety and EMC requirements for fixed belt conveyors for bulk materials EN 626-1, Safety of machinery Reduction of risks to health from hazardous substances emitted by machinery Part 1: Principles and specifications for mach
31、inery manufacturers EN 842, Safety of machinery Visual danger signals General requirements, design and testing EN 953, Safety of machinery Guards General requirements for the design and construction of fixed and movable guards EN 981, Safety of machinery System of auditory and visual danger and info
32、rmation signals EN 982, Safety of machinery Safety requirements for fluid power systems and their components Hydraulics EN 999, Safety of machinery The positioning of protective equipment in respect of approach speeds of parts of the human body EN 1037, Safety of machinery Prevention of unexpected s
33、tart-up EN 1088:1995, Safety of machinery Interlocking devices associated with guards Principles for design and selection EN 1265, Noise test code for foundry machines and equipment EN 60079-0, Electrical apparatus for explosive gas atmospheres Part 0: General requirements (IEC 60079-0:2004, modifie
34、d) EN 60204-1:2006, Safety of machinery Electrical equipment of machines Part 1: General requirements (IEC 60204-1:2005, modified) EN 60529, Degrees of protection provided by enclosures (IP-Code) (IEC 60529:1989) EN 61310-1, Safety of machinery Indication, marking and actuation Part 1: Requirements
35、for visual, auditory and tactile signals (IEC 61310-1:2007) EN 61310-2, Safety of machinery Indication, marking and actuation Part 2: Requirements for marking (IEC 61310- 2:2007) EN ISO 7731, Ergonomics Danger signals for public and work areas Auditory danger signals (ISO 7731:2003) EN ISO 10218-1,
36、Robots for industrial environments Safety requirements Part 1: Robot (ISO 10218-1:2006) BS EN 1248:2001+A1:2009EN 1248:2001+A1:2009 (E) 7 EN ISO 11688-1, Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning (ISO/TR 11688-1:1995) EN ISO 12100-1:2003, Saf
37、ety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-2:2003, Safety of machinery Basic concepts, general principles for design Part 2: Technical principles (ISO 12100-2:2003) EN ISO 13849-1:2006, Safety of machinery Saf
38、ety-related parts of control systems Part 1: General principles for design (ISO 13849-1:2006) EN ISO 13850:2006, Safety of machinery Emergency stop Principles for design (ISO 13850:2006) EN ISO 13857:2008, Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower
39、limbs (ISO 13857:2008) ISO 3864-1, Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs in workplaces and public areas ISO 7000, Graphical symbols for use on equipment Index and synopsis CENELEC R044-001, February 1999, Safety of machinery Guidance and recomme
40、ndations for the avoidance of hazards due to static electricity“ 3 Terms and definitions !For the purpose of this document, the terms and definitions given in EN ISO 12100:2003 and the following apply. NOTE Definition used in EN and ISO standards referred to in this European Standard are also valid
41、for this European Standard.“ 3.1 blasting process where workpiece to be cleaned or surface to be treated is subjected to continuous attack by abrasive blasting media to achieve the desired result 3.2 blasting equipment machines employing either centrifugal force or compressed air as a means of accel
42、erating abrasive. The equipment comprises a chamber which contains the workpiece and also prevents the abrasive media from escaping to the environment after impacting on the workpiece. It also incorporates: a system for collecting, recycling, cleaning by air or magnetic separation or a combination o
43、f both and storage for the abrasive media ready to feed back to the dosing device for abrasive media (for examples of blasting equipment types see Annex A, for an example of a processing scheme see Annex B, Figure B.1) and a conveying system for workpieces. !3.3 abrasive media granular metallic or n
44、on-metallic material to be forcibly applied to a surface to achieve the desired result NOTE Classification of metallic abrasives see EN ISO 11124-1, of non-metallic abrasives see EN ISO 11126-1. BS EN 1248:2001+A1:2009EN 1248:2001+A1:2009 (E) 8 3.4 free-jet work manual blasting process carried out w
45、ith hand held nozzles without protective separation between the operator and the rebounding abrasive media and generated dust NOTE In general the use of an appropriate abrasive blasting helmet and other protective clothing will be necessary in this case.“ 3.5 exhaust system extraction device which c
46、ollects contaminated air under a slight negative pressure and transports it via appropriate ducting to a dust collector 3.6 dust separator air cleaning device to remove contaminated particulates prior to discharge to the atmosphere 3.7 explosion relief panel device to release pressure safely and rap
47、idly 3.8 transfer car vehicle used for transporting the workpieces into and out of the blasting chamber NOTE The vehicle is often on rails. 3.9 machine setting control of the actuation of a mechanism during setting phases when the machine is manually controlled; guards having been by-passed 3.10 man
48、ual operation any sequence or event which is manually controlled by the operator 3.11 automatic operation every cycle initiates the next cycle automatically whereby all supplementary steps are carried out by a predetermined program 4 !List of significant hazards“ Abrasive blasting equipment shall be designed to take into consideration the hazards, the safety requirements and the preventative measures referred to in clause 5. A parameter for the level of safety measures to be applied is the risk of accident to be expected, the extent of which depends upon the hig
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1