EN 12590-1999 en Textiles - Industrial Sewing Threads Made Wholly or Partly from Synthetic Fibres《纺织品 完全或部分用合成纤维制的工业缝纫线》.pdf

1、 STD-BSI BS EN 12590-ENGL 2000 m Lb24bb9 0822b5L 8bl BRITISH STANDARD Textiles - Industrial sewing threads made wholly or partly from synthetic fibres The European Standard EN 12590:1999 has the status of a British Standard ICs 59.080.20 3s EN 12590:2000 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS P

2、ERMITIED BY COPYRIGHT LAW COPYRIGHT European Committee for StandardizationLicensed by Information Handling Services STD=BSI BS EN 12590-ENGL 2000 LbZLibbS 0922b52 7TB BS EN 12590:2000 direction of the Sector AmdNo. Conunittee for Materials and Chemicals, was published under the authority of the Stan

3、dards Committee and comes into effect on 15 January ZOO0 O BSI 01-2000 National foreword Date Comments This British Standard is the English anguage version of EN 12590:1!3!39. It supersedes BS 61571990 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee T

4、CW6, Yarn and sewing threads, which has the responsibility to: - aid enquirers to understand the text; - present to the responsible European committee any enquiries on the - monitor related international and European developments and promulgate interpretation, or proposals for change, and keep the U

5、K interests informed them in the UK A iist of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogu

6、e under the section entitled “Intemational standards Correspondence Index“, or by using the Find“ facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include ali the necessary provisions of a contsact. Users of British Standards are responsible for their correc

7、t application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 22, an inside back cover and a back cover. The BSI copyright notice displayed in t

8、his document indicates when the document was last med. ISBN O 680 35473 3 COPYRIGHT European Committee for StandardizationLicensed by Information Handling Services STD=BSI BS EN 32570-ENGL 2000 I Lb24bb7 L3822b53 b3i EUROPEAN STANDARD NORME EUROPENNE EN 12590 EUROPISCHE NORM October 1999 ICs 59.080.

9、20 English version Textiles - Industrial sewing threads made wholly or partly from synthetic fibres Textiles - Fils coudre industriels composs uniquement ou partiellement de fibres synthtiques Textilien - Vollstndig oder teilweise aus Chemiefasern hergestellte Industrienhgarne This European Standard

10、 was approved by CEN on 5 September 1999 CEN members are bound to comply with the CENICENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-todate lists and bibliographical references concerning sich

11、 national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by traislation under the responsibility of a CEN member into its own language a

12、nd notified to the Central Secretariat has the same status as he official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Noway, Portugal, Spain, Sweden, Switzerl

13、and and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION EUROPISCHES KOMITEE FUR NORMUNG COMITE EUROPEEN DE NORMALISATION Central Secretariat: rue de Stassart, 36 8-1050 Brussels O 1999 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref

14、. No. EN 12590:1999 E COPYRIGHT European Committee for StandardizationLicensed by Information Handling ServicesPage 2 EN 12590:1999 Contents Page Foreword 2 1 Scope 3 2 Normative references . 4 3 Terms and definitions 5 4 Requirements 5 5 Statement of conformity 6 Table 2 . Breaking force requiremen

15、ts for staple fibre polyester threads . 8 Table 4 . Breaking force requirements for false twist textured polyester threads 10 Table 5 . Breaking force requirements for polyester/cotton corespun threads . 11 Table 7 . Breaking force requirements for continuous filament polyamide 6.6 threads 13 Table

16、1 . Breaking force requirements for continuous filament polyester threads 7 Table 3 . Breaking force requirements for air-jet textured polyester threads 9 Table 6 . Breaking force requirements for polyester/polyester corespun threads 12 Table 8 . Breaking force requirements for false twist textured

17、polyamide 6.6 threads 14 Table 9 . Breaking force requirements for continuous filament para-aramid threads 14 Table 11 . Breaking force requirements for continuous filament meta-aramid threads 15 Table 12 . Breaking force requirements for staple fibre meta-aramid threads 15 Table 13 . Breaking force

18、 requirements for continuous filament polyester braids 16 Table 15 . Breaking force requirements for continuous filament polyamide 6.6 braids 17 Table 10 . Breaking force requirements for staple fibre para-aramid threads . 14 Table 14 . Breaking force requirements for staple fibre polyester braids .

19、 16 Table 16 . Minimum colour fastness requirements for general purpose threads. excluding aramids for use in the garment industry 17 Annex A (informative) Ticket numbers . 18 Annex B (normative) Determination of variation in length after immersion in boiling water 19 Foreword This European Standard

20、 has been prepared by Technical Committee CEN/TC 248. Textiles and textile products. the Secretariat of which is held by BSL This European Standard shall be given the status of a national standard. either by publication of an identical text or by endorsement. at the latest by April 2000. and conflic

21、ting national standards shall be withdrawn at the latest by April 2000 . According to the CENKENELEC Internal Regulations. the national standards organizations of the following countries are bound to implement this European Standard: Austria. Belgium. Czech Republic. Denmark. Finland. France. German

22、y. Greece. Iceland. Ireland. Italy. Luxembourg. Netherlands. Norway. Portugal. Spain. Sweden. Switzerland and the United Kingdom . OBSI 01-2000 COPYRIGHT European Committee for StandardizationLicensed by Information Handling ServicesSTD-BSI BS EN 12590-ENGL 2000 = Lb24bb9 0822b55 407 Page 3 EN 12590

23、:1999 1 Scope This European Standard specifies requirements for industrial sewing threads made wholly or partly from synthetic fibres. It specifies requirements for industrial sewing threads based on breaking force in relation to the thread size. For threads which are for use in the garment trade it

24、 also specifies colour fastness and boiling water shrinkage requirements. It deals with industrial sewing threads made from the following substrates and combinations of substrates: a) continuous filament polyester; b) staple fibre polyester; c) air-jet textured polyester (see 3.3); d) false twist te

25、xtured polyester (see 3.4); e) polyester and cotton corespun, continuous filament polyester core, cotton sheath (see3.5); f) polyester and polyester corespun, continuous filament polyester core, staple spun polyester sheath (see 3.5); g) continuous filament polyamide 6.6; h) false twist textured pol

26、yamide 6.6; i) continuous filament and staple fibre aramid; j) continuous filament polyester, staple fibre polyester and continuous filament polyamide 6.6 braids for handmachine stitching. OBSI 01-2000 COPYRIGHT European Committee for StandardizationLicensed by Information Handling Services STD-BSI

27、BS EN L2590-ENGL 2000 Lb2Ybb 0822b5b 3q3 = Page 4 EN 12590:1999 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed her

28、eafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN IS0 105-CO6 EN IS0 105-DOI EN I

29、S0 105-EO1 EN IS0 105-X12 EN IS0 2060 EN IS0 2062 EN 20 105-BO2 EN 20139 IS0 105-F IS0 105-F10 Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering (IS0 105-C06:1994) Textiles - Tests for colour fastness - Part Dol: Colour fastness to dry cleaning (I

30、S0 105-D01:1993) Textiles - Tests for colour fastness - Part E01: Colour fastness to water (IS0 105-EO1 : 1994) Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing (IS0 105x12: 1993) Textiles - Yarns from packages - Determination of linear density (mass per unit length) by th

31、e skein method (IS0 2060: 1994) Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break (IS0 2062: 1993) Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light (xenon arc fading lamp test) (IS0 105-B02:1988) Textiles - Standar

32、d atmospheres for conditioning and testing (IS0 139: 1973) Textiles - Tests for colour fastness - Part F: Standard adjacent fabrics Textiles - Tests for colour fastness - Part F 10: Specification for adjacent fabric: Multifibre OBSI 01-2000 COPYRIGHT European Committee for StandardizationLicensed by

33、 Information Handling ServicesPage 5 EN 12590:1999 3 Terms and definitions For the purpose of this standard, the following definitions apply. 3.1 sewing thread a structure of staple fibre and/or filaments produced by any of a variety of techniques such that the cohesive whole can withstand the mecha

34、nical operation of sewing. NOTE 1 Processes such as spinning, twisting, braiding, plaiting, bonding, false twist or air-jet texturing, etc. (used either individually or in combination) are employed to attain the necessary consolidation of fibres and/or filaments required in a sewing thread. An appro

35、priate finish or lubricant can be added to facilitate sewing. NOTE 2 Different finishes, such as soft and glac corespun, unbonded and bonded continuous filament polyamide, etc., may also be available for specific uses. 3.2 ticket size; ticket number a measure of the linear density of a sewing thread

36、 expressed as the approximate three-ply equivalent of the metric count of the input single yam (see annex A) 3.3 air-jet textured thread thread made fiom consolidation of continuous filament yarns produced by controlled over-feeding in a turbulent air stream 3.4 false twist textured thread thread ma

37、de from continuous filament yarns which have been subjected to a false twist texturing process 3.5 corespun thread thread made from yams produced at the spinning frame by feeding a filament yam through the delivery rollers simultaneously with the spinning of a staple material 3.6 minimum average bre

38、aking force the average value of 10 tests from one individual packagehit 4 Requirements 4.1 Breaking force Threads shall comply with the appropriate requirements of Tables 1 to 15. The tables show the main numbers available to the trade but other numbers may be available for which the breaking force

39、 requirements shall be obtained by interpolation from tex values. 4.2 Colour fastness The colour fastness requirements of general purpose threads for use in the garment trade shall be not lower than those specified in Table 16. OBSI 01-2000 COPYRIGHT European Committee for StandardizationLicensed by

40、 Information Handling ServicesPage 6 EN 12590:1999 4.3 Shrinkage The maximum boiling water shrinkage of the threads excluding false twist textured threads shall be thenivise requested. Information on standards BSI provides a wide range of information on national, European and international jtandards

41、 through its Library and its Technical Help to Exporters Service. Various BSI electronic informaon services are also available which give details on all its products and services. Contact the Information Centre. Tel 020 8996 7111. Fax: O20 8996 7048. Subscribing members of BSI are kept up to date wi

42、th standards developments and receive substantiai discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel 020 8996 7002. Fax: O20 8996 7001. Copyright Copyright subsists in ail BSI publications. BSI also holds the copyright, in the

43、 UK, of the publications of the intemational standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no ex&act may be reproduced, stored in a retrieval system or transmitted in any form or by any means - electsonic, photocopying, recording or otherwise - without

44、 prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel 020 8996 7070. COPYRIGHT European Committee for StandardizationLicensed by Information Handling Services