1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN ICS 53.020.20 NO CO
2、PYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Cranes Information for use and testing Part 2: Marking 126442:2000 +A1:2008 0This British Standard was published under the authority of the Standards Committee and comes 15 May 2000 Amendments/corrigenda issued since publication Date
3、Comments National foreword BSEN126442:2000+A1:2008 The start and finish of text introduced or altered by amendment is indicated in A list of organizations represented on this subcommittee can be obtained on request to its secretary. This publication does not purport to include all the necessary prov
4、isions of a Compliance with a British Standard cannot confer immunity from legal obligations. the text by tags . Tags indicating changes to CEN text carry the number !“ It supersedes BS EN 12644-2: . is indicated by . of the CEN amendment. For example, text altered by CEN amendment A1 This British S
5、tandard is the UK implementation of EN 12644-2:2000+A1:2008. BSI2009 ISBN 978 0 580 606786 e 30 June 2009 ImplementationofCENamendmentA1:2008 The UK participation in its preparation was entrusted to Technical Committee HE/3/11, Crane safety and testing. contract. Users are responsible for its correc
6、t application. . 2000 which is withdrawn. by MHE/3, Cranes and derricks, to subcommittee M into effect on EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12644-2:2000+A1 July 2008 ICS 53.020.20 Supersedes EN 12644-2:2000 English Version Cranes - Information for use and testing - Part 2: Marking
7、 Appareils de levage charge suspendue - Informations pour lutilisation et les essais - Partie 2: Marquage Krane - Informationen fr die Nutzung und Prfung - Teil 2: Kennzeichnung This European Standard was approved by CEN on 3 January 2000 and includes Amendment 1 approved by CEN on 15 June 2008. CEN
8、 members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on appl
9、ication to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre
10、has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
11、Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any
12、 means reserved worldwide for CEN national Members. Ref. No. EN 12644-2:2000+A1:2008: EEN 12644-2:2000+A1:2008 (E) 2 Contents Page Foreword3 Introduction .4 1 Scope 4 2 Normative references 4 3 Terms and definitions .5 4 Hazards .5 5 Safety requirements and/or measures 5 5.1 General5 5.2 Manufacture
13、rs plate .5 5.3 Rated capacity information.6 5.3.1 General6 5.3.2 Cranes with constant rated capacity .6 5.3.3 Cranes with variable rated capacity 6 5.4 Warning information and prohibiting signs6 6 Verification of the safety requirements and/or measures .6 Annex ZA (informative) ! ! ! !Relationship
14、between this European Standard and the Essential Requirements of EU Directive 98/37/EC“ “ “ “.7 Annex ZB (informative) ! ! ! !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ “ “ “.8 Bibliography 9 BS EN 12644-2:2000+A1:2008EN 12644-2:2000+A1:200
15、8 (E) 3 Foreword This document (EN 12644-2:2000+A1:2008) has been prepared by Technical Committee CEN/TC 147 “Cranes - Safety”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorseme
16、nt, at the latest by January 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. This document includes Amendment 1, approved by CEN on 2008-06-15. This document supersedes EN 12644-2:2000. The start and finish of text introduced or altered by amendment is ind
17、icated in the text by tags ! “. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which ar
18、e integral parts of this document.“ According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece
19、, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 12644-2:2000+A1:2008EN 12644-2:2000+A1:2008 (E) 4 Introduction This European standard is a type C-standar
20、d as defined in EN 414. This standard has been prepared to be a harmonized standard to provide one means of conforming with the essential health and safety requirements of the Machinery Directive, as amended. This is part 2 of a series intended to give information for use to be supplied by the manuf
21、acturers of cranes. The other part of this standard is: Part 1: Instructions !deleted text“ The extent to which hazards are covered is indicated in the scope of this standard. 1 Scope This part of EN 12644 specifies the requirements for markings, signs and warnings for cranes. This crane standard ha
22、s been written to be used in conjunction with other crane standards being prepared by CEN/TC147. NOTE : Specific requirements for particular types of crane, are given in the appropriate European Standards for the particular crane type. The hazards covered by this standard are identified in clause 4.
23、 This part of EN 12644 applies to cranes which are manufactured after the date of approval by CEN of this standard. This standard does not cover hazards related to the lifting of persons. 2 Normative references This European Standard incorporates, by dated or undated reference, provisions from other
24、 publications. These normative references are cited at the appropriate places in the text and publications are listed hereafter. For dated references, subsequent amendments to, or revisions of, any of these publications apply to this European Standard only when incorporated in it by amendment or rev
25、ision. For undated references the latest edition of the publication referred to applies. EN 292-1:1991, Safety of machinery - Basic concepts, general principles for design. - Part 1: Basic terminology, methodology EN 292-2:1991+A1:1995, Safety of machinery - Basic concepts, general principles for de
26、sign. - Part 2: Technical principles and specifications prEN 12644-1:1997, Cranes Safety Requirements for inspection and use - Part 1: Instructions ISO 13200, Cranes Safety signs and hazard pictorials General principles BS EN 12644-2:2000+A1:2008EN 12644-2:2000+A1:2008 (E) 5 NOTE The Bibliography pr
27、ovides information regarding relevant EU directives, European and International standards. 3 Terms and definitions For the purposes of this standard, the following terms and definitions apply: 3.1 rated capacity Load that the crane is designed to lift for a given operating condition (e.g. configurat
28、ion, position of the load). 3.2 rated capacity chart/display Device to chart/display the actual rated capacity of the crane for the current configuration and position (e.g. radius, outreach, angle) of the load. 3.3 hoist mechanism Drive mechanism for lifting and lowering the load. 4 Hazards Cranes c
29、an present hazards to persons in the danger zone. Instructions regarding marking, safe putting into service, use, handling, maintenance, training etc are necessary to reduce or eliminate the risks associated with the hazards. This standard specifies requirements for markings, signs and warnings for
30、cranes in order to prevent or minimize hazards or hazardous situations. A list of hazards is given in the appropriate crane standards for each crane type. 5 Safety requirements and/or measures 5.1 General General requirements for marking, signs and warnings for machines shall be in accordance with c
31、lause 5 of EN 292-2:1991+A1:1995. NOTE See also the international standards quoted in the ”Bibliography”, in particular for pictograms, symbols, colours etc. 5.2 Manufacturers plate Cranes shall be provided with a plate which shall be permanently fixed, marked legibly and indelibly and containing th
32、e following information: name and address of manufacturer and, if appropriate, the supplier; year of manufacture; BS EN 12644-2:2000+A1:2008EN 12644-2:2000+A1:2008 (E) 6 identification number; type, if there is a type designation. 5.3 Rated capacity information 5.3.1 General The rated capacity shall
33、 be expressed as a mass. The rated capacity shall be consistent with the technical data as specified in prEN 12644-1:1997. 5.3.2 Cranes with constant rated capacity On cranes with constant rated capacity, this capacity shall be stated in such a position(s) on the crane so that the information can be
34、 read by the crane driver at the operating position and also by the slinger. 5.3.3 Cranes with variable rated capacity For cranes having a variable rated capacity depending on the crane outreach, or other variable parameters of the crane, the information about the rated capacity shall be provided in
35、 such a way so that it is available to the crane driver from the operating position. The rated capacity information shall be presented specifying the positions or conditions to which the rated capacity applies. The rated capacity of the crane shall be presented in such a manner that the crane driver
36、 does not need to take into account the weights of parts of the crane other than non-fixed load lifting attachments, and does not need to calculate the rated capacity. If a crane has several hoisting mechanisms, the rated capacity for each hoisting mechanism shall be stated and information shall als
37、o be provided to show any permitted combined use of the hoisting mechanisms. 5.4 Warning information and prohibiting signs Where risks cannot be fully eliminated they shall be described in the appropriate crane type standards. They shall be addressed by warning information as described in ISO 13200.
38、 If the prohibiting/warning signs are to be placed on site, the manufacturer shall provide instructions to the user. See prEN 12644-1:1997. 6 Verification of the safety requirements and/or measures Before first use of any crane it shall be verified by visual assessment that markings, signs and warni
39、ngs have been provided in accordance with this standard. BS EN 12644-2:2000+A1:2008EN 12644-2:2000+A1:2008 (E) 7 Annex ZA (informative) ! ! ! !Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC This European Standard has been prepared under a mandate
40、given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive 98/37/EC amended by 98/79/CE on machinery. Once this standard is cited in the Official Journal of the European Communities under th
41、at Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with Essential Requirement 1.7.3 of that Directive and associated EF
42、TA regulations. WARNING - Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard.“ BS EN 12644-2:2000+A1:2008EN 12644-2:2000+A1:2008 (E) 8 Annex ZB (informative) ! ! ! !Relationship between this European Standard and the Essential Req
43、uirements of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive 2006/42/EC on machinery. Once this st
44、andard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of con
45、formity with Essential Requirement 1.7.3 of that Directive and associated EFTA regulations. WARNING - Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard.“ BS EN 12644-2:2000+A1:2008EN 12644-2:2000+A1:2008 (E) 9 Bibliography A.1 EU
46、 Directives EU Directive 98/37/EEC dated 22.06.1998, for adjustment of the legal provisions of the member countries relating to machinery. EU Directive 77/576/EEC dated 25.07.1977 for adjustment of the legal provisions of the member countries relating to safety marking at the workplace. EU Directive
47、 79/649/EEC dated 21.06.1979 for amendment of the annexes further to Directive 77/576/EEC dated 25.07.1977. EU Directive 89/655/EEC dated 30.11.1989, and its amendment 95/63/EEC on the minimum safety and health requirements for the use of work equipment by workers at work. EU Directive 93/68 EEC, da
48、ted 22.07.1998 on CE-marking. A.2 European Standards prEN 12937:1997 Safety of machinery - Technical principles and specifications for mobility and for lifting Crane standards in preparation by CEN/TC147. A.3 International standards ISO 3461-1:1988, General principles for the creation of graphical s
49、ymbols - Part 1: Graphical symbols for use on equipment ISO 3864:1984, Safety colours and safety signs ISO 4196:1984, Graphical symbols - Use of arrows ISO 7000: 1989, Graphical symbols for use on equipment - Index and synopsis ISO 7296-1:1991, Cranes - Graphical symbols - Part 1: General ISO 7296-2:1996, Cranes - Graphical symbols - Part 2: Mobile cranes ISO 9942-1: 1994, Cranes - Information labels - Part 1: General BS EN 12644-2:2000+A1:2008BSI Group Headquarters 389 Chiswick High Road, London, W4 4AL, UK Tel +44 (0)20 8996 9001 Fax
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1