EN 12927-3-2004 en Safety requirements for cableway installations designed to carry persons - Ropes - Part 3 Long splicing of 6 strand hauling carrying hauling and towing ropes《载人用.pdf

1、BRITISH STANDARD BS EN 12927-3:2004 Safety requirements for cableway installations designed to carry persons Ropes Part 3: Long splicing of 6 strand hauling, carrying hauling and towing ropes The European Standard EN 12927-3:2004 has the status of a British Standard ICS 45.100 BS EN 12927-3:2004 Thi

2、s British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 October 2004 BSI 28 October 2004 ISBN 0 580 44674 3 National foreword This British Standard is the official English language version of EN 12927-3:2004. The UK participation in its preparation w

3、as entrusted to Technical Committee MCE/20, Aerial ropeways, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to i

4、n this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of

5、a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or propo

6、sals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 9 and a back cover. The BSI copyright notice displa

7、yed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN129273 October2004 ICS45.100 Englishversion Safetyrequirementsforcablewayinstallationsdesignedtocarry personsRopesPart3:Longspl

8、icingof6strandhauling, carryinghaulingandtowingropes Prescriptionsdescuritdesinstallationsdetransport cblesdestinesauxpersonnesCblesPartie3: pissuragedescblestracteurs,porteurstracteursetde remorquage6torons SicherheitsanforderungenfrSeilbahnenfrden PersonenverkehrSeileTeil3:Langspleivon6litzigen Zu

9、gundFrdeseilenfrSeilbahnen ThisEuropeanStandardwasapprovedbyCENon23August2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcerning

10、s uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthe

11、samestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,Switzerl

12、andandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2004CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN129273:2004:EEN 12927-3:2004 (E) 2 Co

13、ntents Foreword3 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 General requirements6 4.1 Application of this standard .6 4.2 Safety principle 6 5 Long splicing requirements7 5.1 General7 5.2 Splice geometry .7 5.3 Splice diameter 7 6 Repair8 6.1 Repair at a splice .8 6.2 Repair out

14、side a splice8 7 Shortening 8 8 Operational documentation8 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2000/9/EC relating to cableway installations designed to carry persons .9 Table ZA Correspondence between this European Standar

15、d and Directive 2000/9/EC relating to cableway installations designed to carry persons.9 EN 12927-3:2004 (E) 3 Foreword This document (EN 12927-3:2004) has been prepared by Technical Committee CEN/TC 242 “Safety requirements for passenger transportation by rope”, the secretariat of which is held by

16、AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2005, and conflicting national standards shall be withdrawn at the latest by April 2005. This document has been prepared under a mandat

17、e given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This EN 12927 includes the following parts under the

18、 general title “Safety requirements for cableway installations designed to carry persons Ropes“: Part 1: Selection criteria for ropes and their end fixings Part 2: Safety factors Part 3: Long splicing of 6 strand hauling, carrying-hauling and towing ropes Part 4: End fixings Part 5: Storage, transpo

19、rtation, handling and tensioning Part 6: Discard criteria Part 7: Inspection, repair and maintenance Part 8: Magnetic rope testing (MRT) This European Standard forms part of the standards programme adopted by the CEN Technical Board in relation of safety requirements for passenger transportation by

20、rope. This programme includes the following standards: 1) Safety requirements for cableway installations designed to carry persons - Terminology 2) Safety requirements for cableway installations designed to carry persons - General requirements 3) Safety requirements for cableway installations design

21、ed to carry persons - Calculations 4) Safety requirements for cableway installations designed to carry persons - Ropes 5) Safety requirements for cableway installations designed to carry persons - Tensioning devices 6) Safety requirements for cableway installations designed to carry persons - Drive

22、systems and other mechanical equipment 7) Safety requirements for cableway installations designed to carry persons - Carriers 8) Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems 9) Safety requirements for cableway installati

23、ons designed to carry persons - Civil engineering works EN 12927-3:2004 (E) 4 10) Safety requirements for cableway installations designed to carry persons Pre-commissioning inspection, maintenance and operational inspection and checks 11) Safety requirements for cableway installations designed to ca

24、rry persons Recovery and evacuation 12) Safety requirements for cableway installations designed to carry persons - Operation 13) Safety requirements for cableway installations designed to carry persons - Quality assurance Together these form a series of standards regarding design, manufacture, produ

25、ction, maintenance and operation of all installations for passenger transportation by rope. In respect of ski-tows, the drafting of this European Standard has been guided by the works of the International Organisation for Transportation by rope (OITAF). According to the CEN/CENELEC Internal Regulati

26、ons, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norwa

27、y, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom EN 12927-3:2004 (E) 5 1 Scope This part of EN 12927 specifies the safety requirements applicable to long splicing of steel wires 6 strand hauling, carrying-hauling and towing ropes for installations for passenger

28、transportation by rope. This standard is applicable to the various types installations systems and their environment. This part of EN 12927 applies to the requirements for the long splicing, repair and shortening of hauling and carrying hauling ropes that meet the requirements of EN 12385-8. This pa

29、rt of EN 12927 does not apply to installations for the transportation of goods, nor to inclined lifts. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the l

30、atest edition of the referenced document (including any amendments) applies. EN 1709, Safety requirements for cableway installations designed to carry persons - Pre-commissioning inspection, maintenance, operational inspection and checks. prEN 1907:2004, Safety requirements for cableway installation

31、s designed to carry persons - Terminology. EN 1908, Safety requirements for cableway installations designed to carry persons Tensioning devices. EN 1909, Safety requirements for cableway installations designed to carry persons - Recovery and evacuation. EN 12385-2:2002, Steel wire ropes - Safety - P

32、art 2: Definitions, designation and classification. EN 12385-8, Steel wire ropes - Safety - Part 8: Stranded hauling and carrying-hauling rope for cableway installations designed to carry persons. EN 12397, Safety requirements for cableway installations designed to carry persons Operation. EN 12408,

33、 Safety requirements for cableway installations designed to carry persons Quality assurance. EN 12927-1, Safety requirements for cableway installations designed to carry persons Ropes Part 1: Selection criteria for ropes and their end fixings. EN 12927-2, Safety requirements for cableway installatio

34、ns designed to carry persons Ropes Part 2: Safety factors. EN 12927-4, Safety requirements for cableway installations designed to carry persons Ropes Part 4: End fixings. EN 12927-5, Safety requirements for cableway installations designed to carry persons Ropes Part 5: Storage, transportation, insta

35、llation and tensioning. EN 12927-6, Safety requirements for cableway installations designed to carry persons Ropes Part 6: Discard criteria. EN 12927-7, Safety requirements for cableway installations designed to carry persons Ropes Part 7: Inspection, repair and maintenance. EN 12927-8, Safety requi

36、rements for cableway installations designed to carry persons Ropes Part 8: Magnetic rope testing (MRT). EN 12929-1, Safety requirements for passenger transportation by rope - General requirements - Part 1: Requirements applicable to all installations. EN 12927-3:2004 (E) 6 EN 12929-2, Safety require

37、ments for cableway installations designed to carry persons General requirements Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes. EN 12930, Safety requirements for cableway installations designed to carry persons Calculations. EN 13107, Safety requi

38、rements for cableway installations designed to carry persons Civil engineering works. EN 13223, Safety requirements for cableway installations designed to carry persons Drive systems and other mechanical equipment. EN 13243, Safety requirements for cableway installations designed to carry persons -

39、Electrical equipment other than for drive systems. prEN 13796-1, Safety requirements for cableway installations designed to carry persons Carriers Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers. prEN 13796-2, Safety requirements for cable

40、way installations designed to carry persons Carriers Part 2: Slipping resistance tests for grips. prEN 13796-3, Safety requirements for cableway installations designed to carry persons Carriers Part 3: Fatigue testing. 3 Terms and definitions For the purposes of this document, the terms and definiti

41、ons given in prEN 1907:2004 and in EN 12385-2:2002 apply. 4 General requirements 4.1 Application of this standard The requirements of this document apply to all installations along with those of EN 1709, EN 1908, EN 1909, EN 12397, EN 12408, EN 12927-1, EN 12927-2, EN 12927-4, EN 12927-5, EN 12927-6

42、, EN 12927-7, EN 12927-8, EN 12929-1, EN 12929-2, EN 12930, EN 13107, EN 13223, EN 13243, prEN 13796- 1, prEN 13796-2 and prEN 13796-3. 4.2 Safety principle 4.2.1 General If ropes of different productions are required to be spliced together, they shall have the same basic design characteristics in t

43、erms of nominal rope diameter, strand construction, minimum breaking force, direction and type of lay, wire grades, measured rope diameter and measured lay length. EN 12927-3:2004 (E) 7 4.2.2 Hazard scenarios Especially the following events may lead to hazardous situations, which may be avoided or l

44、imited by the requirements of this document: a) slipping apart of the two rope ends connected by a long splice may lead to a failure of the long splice; b) slipping or malfunction of the grip in the splice area can lead to insufficient attachment of the grip. 4.2.3 Safety measures a) The risk of sli

45、pping apart of the spliced rope ends may be reduced by a correct correlation of geometrical characteristics of the two ropes connected by the splice, by selecting the splice geometry in accordance with this standard and by selecting the correct auxiliary (wrapping) material. b) The risk of an insuff

46、icient grip attachment may be reduced by applying the diameters overall to the splice in accordance with this standard. 5 Long splicing requirements 5.1 General A spliced connection is admissible only if during operation the rope safety factor does not exceed 20 at any section of the cableway and is

47、 not less than the values set-up in EN 12930. Splicing shall be performed by a competent person, the splicer, following a written technical procedure. The splicer shall be qualified by knowledge and practical experience and shall be capable of assessing the quality of the splice in relation to the s

48、trength and function of the rope. To avoid affecting the results from any subsequent magnetic rope testing (MRT), the rope splice shall not contain any magnetic material other than the rope itself. If there are two or more splices they shall be durably marked according to their age. 5.2 Splice geometry The overall splice length and the length of the tails shall be at least: Length Tails Safety factor 15 1200 60 Safety factor 15 SF 20 1500