EN 12978-2003 en Industrial commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods (Incorporates Amendment A1 200.pdf

1、BRITISH STANDARD BS EN 12978:2003 Industrial, commercial and garage doors and gates Safety devices for power operated doors and gates Requirements and test methods ICS 91.060.50 +A1:2009National foreword This British Standard is the UK implementation of EN 12978:2003+A1:2009. It supersedes BS EN 129

2、78:2003 which is withdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“. The UK participation in its prepa

3、ration was entrusted by Technical Committee B/538, Doors, windows, shutters, hardware and curtain walling, to Subcommittee B/538/5, Industrial, commercial and garage doors and gates. A list of organizations represented on this subcommittee can be obtained on request to its secretary. This publicatio

4、n does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. BS EN 12978:2003+A1:2009 This British Standard was published under the authority of the Stand

5、ards Policy and Strategy Committee on 5 June 2003 BSI 2009 Amendments/corrigenda issued since publication Date Comments 31 October 2009 Implementation of CEN amendment A1:2009 ISBN 978 0 580 63105 4 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12978:2003+A1 July 2009 ICS 91.060.50 Supersedes

6、 EN 12978:2003 English Version Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods Portes et portails quipant les locaux industriels et commerciaux et les garages - Dispositifs de scurit pour portes motorises - Prescri

7、ptions et mthodes dessai Tren und Tore - Schutzeinrichtungen fr kraftbettigte Tren und Tore - Anforderungen und Prfverfahren This European Standard was approved by CEN on 29 November 2002 and includes Amendment 1 approved by CEN on 6 June 2009. CEN members are bound to comply with the CEN/CENELEC In

8、ternal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN m

9、ember. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN me

10、mbers are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden

11、, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Re

12、f. No. EN 12978:2003+A1:2009: E2 Contents page Foreword 4 1 Scope 6 1.1 General 6 1.2 Exclusions 6 1.3 Door types and applications . 7 2 Normative references 7 3 Terms and definitions . 8 4 Requirements . 15 4.1 General 15 4.1.1 Environmental conditions . 15 4.1.2 Power supply 17 4.1.3 Electrical eq

13、uipment 17 4.1.4 Enclosures for electrical equipment 17 4.1.5 Functional requirements . 17 4.1.6 Adjustments . 18 4.1.7 Fixing of safety devices 18 4.2 Additional requirements for pressure sensitive protective equipment . 18 4.2.1 Additional coverings for sensing elements 18 4.2.2 Actuating force .

14、19 4.2.3 Specific requirements for pressure sensitive edges and bars . 20 4.2.4 Specific requirements for pressure sensitive mats and floors . 20 4.3 Additional requirements for electro sensitive protective equipment . 21 4.3.1 Detection capability . 21 4.3.2 Lasers . 21 4.3.3 Additional requirement

15、s for active opto-electronic protective devices (AOPDs) . 21 5 Marking . 21 5.1 Electro sensitive protective equipment . 21 5.2 Pressure sensitive protective equipment . 22 6 Information for use 22 6.1 Instruction handbook -General 22 6.1.1 Electro sensitive protective equipment . 23 6.1.2 Pressure

16、sensitive protective equipment . 23 6.2 Instructions for the installation of a safety device . 23 6.3 Instructions for the use of the safety device 23 6.4 Instructions for maintenance . 24 7 Verification and test methods 24 7.1 General 24 7.2 Test specimen 24 7.2.1 Preferred test samples 25 7.3 Test

17、 conditions 25 7.3.1 Test environments . 26 7.4 Environmental tests 26 7.4.1 General 26 7.4.2 Temperature range 26 7.4.3 Humidity 26 7.4.4 Electromagnetic compatibility 27 7.4.5 Vibration . 27 7.4.6 Power supply 28 BS EN 12978:2003+A1:2009 EN 12978:2003+A1:2009 (E)3 7.5 Electrical equipment 28 7.6 E

18、nclosure(s) for electrical equipment . 28 7.7 Functional test . 28 7.7.1 Sensing function and detection capability . 28 7.7.2 Response time . 29 7.8 Adjustments . 29 7.9 Sensor fixing 29 7.10 PSPE operating characteristics . 29 7.11 Single fault failure 30 7.12 Marking . 30 7.13 Information for inst

19、allation and use 30 Annex A (normative) List of significant hazards 31 Annex ZA (informative) ! ! ! !Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC“ “ “ “ . 32 Annex ZB (informative) ! ! ! !Relationship between this European Document and the Essen

20、tial Requirements of EU Directive 2006/42/EC“ “ “ “ . 33 BS EN 12978:2003+A1:2009 EN 12978:2003+A1:2009 (E)4 Foreword This document (EN 12978:2003+A1:2009) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling“, the secretariat of which i

21、s held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at the latest by January 2010. This European Standard was appro

22、ved by CEN on 29 November 2002 and includes Amendment 1 approved by CEN on 6 June 2009. This document supersedes EN 12978:2003. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. This document has been prepared under a mandate given to CEN by the Eur

23、opean Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ This standard is part of a series of European Standards for industr

24、ial, commercial and garage doors and gates that are identified in prEN 13241-1. Annex A is normative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus,

25、Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 12978:2003+A1:2009 EN 12978:2003+A1:200

26、9 (E)5 Introduction This European product related Standard has been prepared to meet the needs of manufacturers, users and safety enforcement authorities, with the primary purpose of providing design and performance requirements for various types of sensitive protective equipment employing different

27、 methods of sensing, for installation on power operated doors used by vehicular and pedestrian traffic. This document is a type C-standard as stated in EN 1070. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this doc

28、ument. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of this typ

29、e C standard. Sensitive protective equipment (safety devices) for manufacturing machinery are specified in EN 1760-1, EN 1760 2, EN 61496-1 and IEC 61496-2, which are ”Type B2” standards as specified in EN 292-1. Sensitive protective equipment (safety devices) for power operated doors are not used i

30、n the same circumstances as safety devices for manufacturing machinery such as: a) be suitable for use by, and to give protection to, untrained persons, and in particular applications may be used to protect elderly persons, disabled persons and children; b) be suitable for use outdoors, possibly in

31、severe climatic and environmental conditions; c) be capable if required, to form an integrated part of the door construction and/or perform additional functions, e.g. providing a means of sealing the door; d) incorporate appropriate features for power operated door applications. Some safety devices

32、for manufacturing machinery have e.g. a re-start interlock feature which, if used on power operated doors, could cause the door to operate incorrectly and could lead to heat losses, without increasing the level of safety. Some provisions of this standard are different from the provisions specified i

33、n EN 1760-1, EN 1760-2, EN 61496-1 and IEC 61496-2. Where sensitive protective equipment (safety devices) are designed and built for use on power operated doors, the provisions of this standard take precedence. This standard can not ensure that all possible hazardous situations will be eliminated. A

34、 particular attention should be given to the risk analysis when small children and /or elderly persons have to be detected. With the aim of clarifying the intention of the standard and avoiding doubt when reading it, following assumptions were made when producing it: components are kept in good repa

35、ir or working order; negotiation occurred between the manufacturer and the user concerning the specificity of the use and place of use of the safety device. BS EN 12978:2003+A1:2009 EN 12978:2003+A1:2009 (E)6 1 Scope 1.1 General This European Standard applies for design, construction and testing of

36、sensitive protective devices where the device is used to detect pedestrians including in particular applications, slow moving elderly persons, slow moving disabled persons and children who may be exposed to injury by power operated doors, gates and barriers, electrically powered from a public supply

37、 and intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial, public or residential premises. This standard also covers safety devices for commercial door

38、s such as rolling shutters and rolling grilles when used as doors on retail premises which are mainly provided for the access of persons rather than vehicles or goods. !Noise is generally not a relevant hazard for this type of machinery.“ This standard deals with all significant hazards listed in an

39、nex A and specifies requirements to eliminate or minimise them. This standard covers the requirements for electrical powered safety devices using mains supply provided for installation on or used in conjunction with powered doors in order to avoid hazardous situations which can be encountered when a

40、 door is used normally. The sensitive protective device is designed to give a change in the output signal switching device which may be used to provide protection for the person being at risk. It applies to ready to use sensitive protective device and integrated sensitive protective device (mounted

41、on or connected to a power operated door in normal use). This standard only applies to door safety devices manufactured after the date of publication. 1.2 Exclusions This European Standard does not apply to protective equipment for installation on doors which are intended for a different use than th

42、e one described above such as: lock gates and dock gates; doors on lifts; doors on vehicles; doors mainly for the retention of animals; theatre textile curtains; railway barriers; barriers used solely for vehicles. This standard does not apply to devices used only for the normal control and stopping

43、, including emergency stopping, of power operated doors. This standard does not apply to safety equipment or safety devices for use on machinery other than doors. This standard does not cover operation in environments where the electromagnetic disturbances are outside the range of those specified in

44、 EN 61000-6-4 or for domestic domestic garage doors those of EN 55014-2. This standard does not cover products to be used in potential explosive atmosphere or on armoured doors. BS EN 12978:2003+A1:2009 EN 12978:2003+A1:2009 (E)7 This standard does not cover programmable devices (see IEC 61508 serie

45、s). This standard does not deal with shock resistance of component (example IK code). The above exclusions are based on technology used at the publication time of this standard. 1.3 Door types and applications Doors, and gates can be sliding, sidefolding, tilting, pivoting, rolling, vertical lifting

46、, etc. with many variances for each type. If not specified otherwise, the word ”door” refers to any of these types and variances of doors, and gates. This standard does not specify configuration of the sensitive protective device in relation to the door to be protected. 2 Normative references This E

47、uropean Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publicat

48、ions apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. (including amendments) EN 292-2:1991, Safety of machinery Basic concepts, general principles for design Part 2: Technical principles and specifications. EN 954-1, Safety of machinery Safety-related parts of control systems Part 1: General pri