EN 13035-11-2006 en Machines and plants for the manufacture treatment and processing of flat glass - Safety requirements - Part 11 Drilling machines (Incorporates Amendment A1 2010.pdf

1、BRITISH STANDARDBS EN 13035-11:2006Machines and plants for the manufacture, treatment and processing of flat glass Safety requirements Part 11: Drilling machinesICS 81.100g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g

2、40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58+A1:2010National foreword This British Standard is the UK implementation of EN 13035-11:2006+A1:2010. It supersedes BS EN 13035-11:2006 which is withdrawn.The start and finish of text introduced or altered by amendment is indicat

3、ed in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted by Technical Committee MCE/3, Safeguarding of machinery, to Subcommittee MCE/3/13,

4、 Glass manufacturing machines Safety. A list of organizations represented on this subcommittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a Br

5、itish Standard cannot confer immunity from legal obligations. BS EN 13035-11:2006+A1:2010This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 August 2008 BSI 2010Amendments/corrigenda issued since publicationDate Comments 30 April 2010 Implemen

6、tation of CEN amendment A1:2010ISBN 978 0 580 62975 4EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13035-11:2006+A1 March 2010 ICS 81.100 Supersedes EN 13035-11:2006English Version Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11:

7、 Drilling machines Machines et installations pour la production, le faonnage et la transformation du verre plat - Exigences de scurit - Partie 11: Machines de perage Maschinen und Anlagen zur Herstellung, Be- und Verarbeitung von Flachglas - Sicherheitsanforderungen - Teil 11: Bohrmaschinen This Eur

8、opean Standard was approved by CEN on 24 May 2006 and includes Amendment 1 approved by CEN on 24 January 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alte

9、ration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by tra

10、nslation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Fra

11、nce, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE F

12、R NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13035-11:2006+A1:2010: EEN 13035-11:2006+A1:2010 (E) 2 Contents Page Foreword 3Introduction .41 Scope 52 Normative

13、references 53 Terms and definitions .64 List of significant hazards 75 Safety requirements and/or protective measures 86 Verification of safety requirements and/or protective measures 117 Information for use . 11Annex A (informative) Example of a movable interlocking guard for a drilling machine . 1

14、4Annex B (normative) !Noise-test code“ 15Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC . 17Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ 18Bib

15、liography . 19Tables !Table 1 List of significant hazards . 8BS EN 13035-11:2006+A1:2010EN 13035-11:2006+A1:2010 (E) 3 Foreword This document (EN 13035-11:2006+A1:2010) has been prepared by Technical Committee CEN/TC 151 “Construction equipment and building material machines Safety”, the secretariat

16、 of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2010, and conflicting national standards shall be with-drawn at the latest by September 2010. Attention is drawn

17、 to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2010-01-24. This document supersedes EN 13035-11:

18、2006. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association and supports essential requirements of EU Directive(s). !For rel

19、ationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ It is one of a series concerning machinery for the treatment and processing of flat glass (see Bibliography). According to the CEN/CENELEC Internal Regulations, the national standards organ

20、izations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Por

21、tugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 13035-11:2006+A1:2010EN 13035-11:2006+A1:2010 (E) 4 Introduction This European Standard is a type C standard as stated in EN ISO 12100-1. The machinery concerned and the extent to which hazards, hazardous situat

22、ions and events are covered are indicated in the scope of this European Standard. When provisions of this type C standard are different from those stated in type A or B standards, the provi-sions of this type C standard take precedence over the provisions of the other standards, for machines that ha

23、ve been designed and built according to the provisions of this type C standard. BS EN 13035-11:2006+A1:2010EN 13035-11:2006+A1:2010 (E) 5 1 Scope 1.1 This European Standard contains the requirements for stationary machines for the drilling of flat glass, using a powered rotating tool. Stationary mac

24、hines are classified into: a) manual; b) semi-automatic; c) automatic single-head or multi-head; d) fully automatic. 1.2 !This European Standard deals with the significant hazards, hazardous situations and events rele-vant to drilling machines for flat glass when they are used as intended and under

25、the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).“ This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, the operation and maintenance. !Safety requiremen

26、ts and/or protective measures are given in Clause 5. When references are made to B level standards such as EN 953, EN 983, EN 999, EN 1037, EN 1088, EN 60204-1, EN ISO 13850 and EN ISO 13857, the manufacturer should carry out an adequate risk assessment for the requirements thereof where choice is n

27、ecessary.“ 1.3 This European Standard does not address the safety requirements for conveyor belts, rollers (see EN 619) or other means of transporting the glass to and from the drilling machine (see e.g. EN 13035-5). 1.4 This European Standard is not applicable to drilling machines which are manufac

28、tured before the date of publication of this European Standard by CEN. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refer-ences, only the edition cited applies. For undated references, the latest edition of the referenced

29、 document (including any amendments) applies. !deleted text“ EN 953:1997, Safety of machinery Guards General requirements for the design and construction of fixed and movable guards !deleted text“ EN 983:1996, Safety of machinery Safety requirements for fluid power systems and their components Pneum

30、atics !deleted text“ EN 1088:1995, Safety of machinery Interlocking devices associated with guards Principles for design and selection !EN 60204-1:2006, Safety of machinery Electrical equipment of machines Part 1: General require-ments (IEC 60204-1:2005, modified)“ EN 60825-1:1994, Safety of laser p

31、roducts Part 1: Equipment classification, requirements and users guide (IEC 60825-1:1993) BS EN 13035-11:2006+A1:2010EN 13035-11:2006+A1:2010 (E) 6 !EN 61310-1:2008, Safety of machinery Indication, marking and actuation Part 1: Requirements for visual, acoustic and tactile signals (IEC 61310-1:2007)

32、“ !EN ISO 3744:2009“, Acoustics Determination of sound power levels of noise sources using sound pressure Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994) !EN ISO 3746:2009, Acoustics Determination of sound power levels of noise sources using sound pres-sure Su

33、rvey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995, including Cor 1:1995)“ !EN ISO 3747:2009, Acoustics Determination of sound power levels of noise sources using sound pres-sure Comparison method for use in situ (ISO 3747:2000) EN ISO 4871:2009, Acoustics Dec

34、laration and verification of noise emission values of machinery and equipment (ISO 4871:1996) EN ISO 11201:2009, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Engineering method in an essen-tially f

35、ree field over a reflecting plane (ISO 11201:1995, including Cor 1:1997) EN ISO 11202:2009, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Survey method in situ (ISO 11202:1995)“ !EN ISO 11204:2009,

36、Acoustics Noise emitted by machinery and equipment Measurement of emis-sion sound pressure levels at a work station and at other specified positions Method requiring environ-mental corrections (ISO 11204:1995, including Cor 1:1997)“ !EN ISO 11688-1:2009“, Acoustics Recommended practice for the desig

37、n of low-noise machinery and equipment Part 1: Planning (ISO/TR 11688-1:1995) EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-2:2003, Safety of machinery Basic concepts, general principles f

38、or design Part 2: Tech-nical principles (ISO 12100-2:2003) !EN ISO 13849-1:2008, Safety of machinery Safety-related parts of control systems Part 1: General principles for design (ISO 13849-1:2006) EN ISO 13850:2008, Safety of machinery Emergency stop Principles for design (ISO 13850:2006) EN ISO 13

39、857:2008, Safety of machinery Safety distances to prevent hazard zones being reached by up-per and lower limbs (ISO 13857:2008)“ 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 12100-1:2003 and the following apply. 3.1 manual machine machine where

40、 the tool is applied to the workpiece by the direction of the operator BS EN 13035-11:2006+A1:2010EN 13035-11:2006+A1:2010 (E) 7 3.2 semi-automatic machine machine where the workpiece is loaded and unloaded by the operator and some of the intermediate machining operations are under the control and g

41、uidance of the operator. NOTE During the machining operations, the operator does not come into contact with the workpiece 3.3 automatic machine machine where the workpiece is loaded and unloaded by the operator, but all the intermediate machining operations are carried out without operator intervent

42、ion 3.4 fully automatic machine machine where the workpiece is presented to and removed from the tools automatically and all the intermedi-ate machining operations are carried out without intervention of the operator 4 List of significant hazards This clause contains the significant hazards, hazardo

43、us situations and events, as far as they are dealt with in this European Standard, identified by risk assessment as significant for drilling machines and which require action to eliminate or reduce the risk. !deleted text“ BS EN 13035-11:2006+A1:2010EN 13035-11:2006+A1:2010 (E) 8 !Table 1 List of si

44、gnificant hazards Hazards Danger zone/dangerous items Preventive measures: see clause 4.1 crushing during down stroke of the clamp 5.4; 5.7; 7.3.8 4.2 cutting or severing during drilling operation 5.4; 5.7 4.3 entanglement during drilling and glass positioning opera-tions 5.4; 5.7 4.4 drawing-in or

45、trapping during drilling and glass positioning opera-tions 5.4; 5.7 4.5 impact during down stroke of the clamp 5.4; 5.7; 7.3.8 4.6 friction or abrasion during drilling operation 5.4; 5.7 4.7 electrical direct or indirect contact 5.5; 5.8; 5.9; 7.3.5 4.8 resulting from contact with or inha-lation of

46、harmful fluids, gases, mists, fumes and dusts coolants 5.2; 7.3.6 4.9 biological and micro-biological (vi-ral or bacterial) coolants 5.2; 7.3.6 4.10 neglected use of personal protec-tion equipment all operational phases of the machine 5.8; 7.3.3 4.11 impossibility of stopping in the best possible co

47、nditions during operation of the machine 5.6 4.12 ejected objects or fluids during drilling operation 5.2; 5.4 4.13 unexpected start-up by restoration of energy supply after interruption, errors made by the operator all dangerous movements 5.8; 5.9 4.14 hazards by noise may result in hearing damage,

48、 tinnitus, stress, in accidents due to interference with speech communication and with the perception of acoustic signals during drilling operation 5.10; 7.3.2 4.15 lasers laser centring device 5.3; 7.2.1; 7.3.7“ 5 Safety requirements and/or protective measures 5.1 General Machinery shall comply wit

49、h the safety requirements and/or protective measures of this clause. In addition, the machine shall be designed according to the principles of EN ISO 12100 for hazards relevant but not significant which are not dealt with by European Standard (e.g. sharp edges). !deleted text“ Where the means of reducing the risk is by the arrangement of the installed machine or by a safe system of work, the manufacturer shall include in the information for use a