EN 13035-7-2006 en Machines and plants for the manufacture treatment and processing of flat glass - Safety requirements - Part 7 Cutting machines for laminated glass (Incorporates .pdf

1、BRITISH STANDARDBS EN 13035-7:2006+A1:2009Machines and plants for the manufacture, treatment and processing of flat glass Safety requirements Part 7: Cutting machines for laminated glassICS 81.100g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g

2、38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58National forewordThis British Standard is the UK implementation of EN 13035-7:2006+A1:2009. It supersedes BS EN 13035-7:2006 which is withdrawn. The start and finish of text introduced or altered by amend

3、ment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted by Technical Committee MCE/3, Safeguarding of machinery, to Subcomm

4、ittee MCE/3/13, Glass manufacturing machines Safety. A list of organizations represented on this subcommittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compli

5、ance with a British Standard cannot confer immunity from legal obligations.BS EN 13035-7:2006+A1:2009This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 August 2008 BSI 2010Amendments/corrigenda issued since publicationDate Comments 31 January

6、 2010 Implementation of CEN amendment A1:2009ISBN 978 0 580 62973 0EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13035-7:2006+A1 December 2009 ICS 81.100 Supersedes EN 13035-7:2006English Version Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirem

7、ents - Part 7: Cutting machines for laminated glass Machines et installations pour la production, le faonnage et la transformation du verre plat - Exigences de scurit - Partie 7: Machines couper le verre feuillet Maschinen und Anlagen zur Herstellung, Be- und Verarbeitung von Flachglas - Sicherheits

8、anforderungen - Teil 7: Schneidmaschinen fr Verbundglas This European Standard was approved by CEN on 24 May 2006 and includes Amendment 1 approved by CEN on 24 October 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Euro

9、pean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (Engli

10、sh, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria,

11、 Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATI

12、ON COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13035-7:2006+A1:2009: EEN 13035-7:2006+A1:2009 (E) 2 Content

13、s Page Foreword 3Introduction .41 Scope 52 Normative references 53 Terms and definitions .64 List of significant hazards 75 Safety requirements and/or protective measures 86 Verification of the safety requirements and/or protective measures 107 Information for use . 11Annex A (normative) !Noise-test

14、 code“ 13Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC . 15Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ 16Bibliography . 17Tables Table 1 Lis

15、t of significant hazards . 8!Table 2 Individual testing for requirements listed in Clause 5“ 10BS EN 13035-7:2006+A1:2009EN 13035-7:2006+A1:2009 (E) 3 Foreword This document (EN 13035-7:2006+A1:2009) has been prepared by Technical Committee CEN/TC 151 “Con-struction equipment and building material m

16、achines Safety”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at the latest by June 201

17、0. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2009-10-24. This document su

18、persedes EN 13035-7:2006. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association and supports essential requirements of EU Di

19、rective(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ It is one of a series concerning machinery for the treatment and processing of flat glass (see Bibliography). According to the CEN/CENELEC Internal Regulations, the nati

20、onal standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Repub-lic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

21、 Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 13035-7:2006+A1:2009EN 13035-7:2006+A1:2009 (E) 4 Introduction This European Standard is a type C standard as stated in EN ISO 12100-1. The machinery concerned and the extent to which hazards, hazard

22、ous situations and events are covered are indicated in the scope of this European Standard. When provisions of this type C standard are different from those stated in type A or B standards, the provi-sions of this type C standard take precedence over the provisions of the other standards for machine

23、s that have been designed and built according to the provisions of this type C standard. The processing steps at machines for cutting laminated glass as a whole are slower than those at machines for cutting monolithic flat glass. Whereas the positioning, cutting and separating process with modern ma

24、-chines proceeds all-automatically, the loading and unloading of the glass is mainly performed by hand so that operational access is usual, and generally there is no link with other machinery. For possible tiltable parts, reference to the ad-hoc standard EN 13035-4 can be made. The considerable haz-

25、ards by the fast-moving cutting bridges at machines for cutting monolithic glass do not exist with machines for cutting laminated glass having static cutting bridges only for x-cuts. When compiling this European Standard, it was assumed that the existing ad-hoc standards for components are applied,

26、e.g. EN 619, when conveyors are integrated. BS EN 13035-7:2006+A1:2009EN 13035-7:2006+A1:2009 (E) 5 1 Scope 1.1 This European Standard applies for cutting machines for laminated glass including the following steps: transport and positioning, synchronous cutting (scoring) from both sides, break-out,

27、electrical heating and separation. 1.2 !This European Standard deals with the significant hazards, hazardous situations and events rele-vant to cutting machines for laminated glass when they are used as intended and under the conditions of mis-use which are reasonably foreseeable by the manufacturer

28、 (see Clause 4).“ Those hazards, which are dealt with in the ad-hoc standard EN 619 for conveyors are excepted. !This European Standard specifies the ap-propriate technical measures to eliminate or reduce risks arising from the significant hazards during commis-sioning, operation and maintenance.“ H

29、azards from noise are not considered to be significant. 1.3 This European Standard is not applicable to cutting (scoring) and break-out of monolithic glass (see EN 13035-3 and EN 13035-6). 1.4 This European Standard is not applicable to the cutting of laminated glass by sawing or by the use of high-

30、pressure liquid. 1.5 This European Standard is not applicable to the significant hazards of conveyors and machines for the manufacture, treatment and processing of flat glass such as tilting tables. 1.6 This European Standard is not applicable to cutting machines for laminated glass which are manufa

31、c-tured before the date of publication of this European Standard by CEN. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refer-ences, only the edition cited applies. For undated references, the latest edition of the referenc

32、ed document (including any amendments) applies. EN 349:1993, Safety of machinery Minimum gaps to avoid crushing of parts of the human body !deleted text“ EN 953:1997, Safety of machinery Guards General requirements for the design and construction of fixed and movable guards !deleted text“ EN 983:199

33、6, Safety of machinery Safety requirements for fluid power systems and their components Pneumatics EN 1037:1995, Safety of machinery Prevention of unexpected start-up !deleted text“ EN 1760-2:2001, Safety of machinery Pressure sensitive protective devices Part 2: General principles for the design an

34、d testing of pressure sensitive edges and pressure sensitive bars !EN 60204-1:2006, Safety of machinery Electrical equipment of machines Part 1: General require-ments (IEC 60204-1:2005, modified) BS EN 13035-7:2006+A1:2009EN 13035-7:2006+A1:2009 (E) 6 EN 61310-1:1995, Safety of machinery Indication,

35、 marking, actuation Part 1: Requirements for visual, auditory and tactile signals (IEC 61310-1:1995) EN 61496-1:2004, Safety of machinery Electro-sensitive protective equipment Part 1: General requirements and tests (IEC 61496-1:2004, modified) !deleted text“ !EN ISO 4871:2009, Acoustics Declaration

36、 and verification of noise emission values of machinery and equipment (ISO 4871:1996) EN ISO 11201:2009, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Engineering method in an essen-tially free fiel

37、d over a reflecting plane (ISO 11201:1995, including Cor 1:1997) EN ISO 11202:2009, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Survey method in situ (ISO 11202:1995) EN ISO 11204:2009, Acoustics

38、Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Method requiring environmental corrections (ISO 11204:1995, including Cor 1:1997)“ EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for

39、 design Part 1: Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-2:2003, Safety of machinery Basic concepts, general principles for design Part 2: Tech-nical principles (ISO 12100-2:2003) !EN ISO 13732-1:2008, Ergonomics of the thermal environment Methods for the assessment of human re

40、sponses to contact with surfaces Part 1: Hot surfaces (ISO 13732-1:2006) EN ISO 13849-1:2008, Safety of machinery Safety-related parts of control systems Part 1: General prin-ciples for design (ISO 13849-1:2006) EN ISO 13850, Safety of machinery Emergency stop Principles for design (ISO 13850:2006)

41、CLC/TS 61496-2:2006, Safety of machinery Electro-sensitive protective equipment Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) (IEC 61496-2:2006)“ 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN I

42、SO 12100-1:2003 and the following apply: 3.1 laminated (glass) (flat) glass composed of layers of flat glass joined together by plastic layers 3.2 break-out method to open a cut (score) by generating strain, e.g. by mechanical devices 3.3 carriage mounting assembly for moving the cutting heads with

43、the cutting tools in the axis of the (fixed) cutting bridge BS EN 13035-7:2006+A1:2009EN 13035-7:2006+A1:2009 (E) 7 3.4 cutting bridge fixed horizontal guide for the carriage 3.5 separation operation of drawing apart two sheets of laminated glass after scoring, break-out and heating 3.6 clamp (bar)

44、device to hold down the glass from above against a supporting surface, e.g. table 3.7 gripping device equipment to grasp the glass at an edge usually for separation by drawing apart 3.8 stops mechanical devices to limit movements, e.g. of carriages in case of a failure of the operational stop 3.9 po

45、sitioning bridge movable horizontal guide with stops to hold the glass in a definite place 4 List of significant hazards This clause contains all the significant hazards, hazardous situations and events, as far as they are dealt with in this European Standard, identified by risk assessment as signif

46、icant for cutting machines for laminated glass and which require action to eliminate or reduce the risk. Before using this European Standard, it is important to carry out a general risk assessment of the machine in question. BS EN 13035-7:2006+A1:2009EN 13035-7:2006+A1:2009 (E) 8 !Table 1 List of si

47、gnificant hazards Clause Hazards Danger zone/ dangerous item Preventive measures: see clause 4.1 Mechanical 4.1.1 Crushing of the hand or fingers carriage with cutting heads/edge of supporting surface with or without glass 5.2; 5.15 4.1.2 Crushing of the fingers carriage/stops 5.3; 5.15 4.1.3 Crushi

48、ng of the fingers wheels of carriages/guide rails 5.4; 5.15 4.1.4 Crushing of the hand or fingers clamps (bar) for holding down the glass sheet/glass or table 5.5; 5.15 4.1.5 Crushing of the fingers closing movement of gripping devices 5.6; 5.15 4.1.6 Crushing of the body moving positioning bridge,

49、fixed parts, e.g. cutting bridge 5.7; 7.3.5; 5.15 4.2 Electrical heating device, direct or indirect contact 5.8; 7.3.6 4.3 Burns heating device 5.9; 7.2 4.4 Unexpected start-up from: 4.4.1 Disorder of the control system all dangerous movements 5.11; 5.12; 7.3.7; 7.3.8 4.4.2 Restoration of energy supply after an interrup-tion all dangerous movements 5.13 4.4.3 Errors made by the opera-tor all dangerous movements 5.11; 5.12; 7.3.7; 7.3.8 4.5 Impossib