EN 13048-2009 en Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method《包装 铝软管 内部清漆薄膜厚度测量方法》.pdf

1、BS EN 13048:2009ICS 55.120NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDPackaging Flexiblealuminium tubes Internal lacquerfilm thicknessmeasurement methodThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 30 A

2、pril2009 BSI 2009ISBN 978 0 580 58512 8Amendments/corrigenda issued since publicationDate CommentsBS EN 13048:2009National forewordThis British Standard is the UK implementation of EN 13048:2009. Itsupersedes BS EN 13048:2000 which is withdrawn.The UK participation in its preparation was entrusted t

3、o TechnicalCommittee PKW/0/-/10, Plastics.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a Briti

4、sh Standard cannot confer immunityfrom legal obligations.BS EN 13048:2009EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 13048April 2009ICS 55.120 Supersedes EN 13048:2000 English VersionPackaging - Flexible aluminium tubes - Internal lacquer filmthickness measurement methodEmballage - Tubes soupl

5、es en aluminium - Mthode dedtermination de lpaisseur de vernis intrieurPackmittel - Aluminiumtuben - Verfahren zur Bestimmungder Dicke des InnenschutzlackesThis European Standard was approved by CEN on 21 February 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which s

6、tipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard

7、 exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards

8、 bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.E

9、UROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13048:2009: EBS EN 13048:2009E

10、N 13048:2009 (E) 2 Contents Page Foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions 4 4 Principle . 4 5 Apparatus 4 6 Method . 5 7 Test report . 6 BS EN 13048:2009EN 13048:2009 (E) 3 Foreword This document (EN 13048:2009) has been prepared by Technical Committee CEN/TC 261 “

11、Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2009, and conflicting national standards shall be withdrawn at the latest by October

12、2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13048:2000. It is based on the professional recommen

13、dations of the European Tube Manufacturers Association (ETMA) According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finlan

14、d, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 13048:2009EN 13048:2009 (E) 4 1 Scope This document specifies a method for

15、the determination of the thickness of the lacquer film applied inside cylindrical and conical aluminium tubes. The method is a reference. It can also be used as a reference when calibrating other electronic instruments suitable for determining coating weight thickness, e.g. by capacitance measuremen

16、t by eddy current. It is applicable to aluminium tubes used for packing pharmaceutical, cosmetic, hygiene, food and other domestic products. NOTE Although not specified in this standard there are available suitable automatic film thickness measurement instruments that provide instantaneous results w

17、ith good accuracy ( 1m). 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. E

18、N 12374:1998, Packaging Flexible Tubes Terminology EN ISO 2360:2003, Non-conductive coatings on non-magnetic electrically conductive basis materials Measurement of coating thickness Amplitude-sensitive eddy-current method (ISO 2360:2003) 3 Terms and definitions For the purposes of this document, the

19、 terms and definitions given in EN 12374:1998 and EN ISO 2360:2003 apply. 4 Principle The measurement of the thickness of the lacquer film inside aluminium tubes with a micrometer or dial indicator after separation of the film from the aluminium tube and its enamel decoration by chemical means. Thro

20、ugh a chemical reaction the aluminium is dissolved and hydrogen gas is generated. The internal lacquer film remains intact. 5 Apparatus 5.1 Test measuring and other equipment a) Micrometer or dial indicator giving a precision of 0,001 mm (1 m); b) Oven; c) Extractor fan; d) Glass container of a size

21、 capable of containing a tube cut as in Figure 1; e) Scissors; f) Tweezers; BS EN 13048:2009EN 13048:2009 (E) 5 g) Filter paper; h) Protective clothing and glasses. 5.2 Chemical Agents a) Solvent capable of dissolving the external enamel of the tubes; b) Sodium hydroxide with a concentration of 20 g

22、 of NaOH/100 ml. NOTE Hydrochloric acid at a concentration of 10 g HCI/100 ml may be used instead of sodium hydroxide. 6 Method 6.1 Preliminary Precautions The preparation of samples requires the handling and use of hazardous materials. This document does not purport to address all of the safety pro

23、blems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use. 6.2 Preparation of Samples a) Cut the tubes with the scissors as shown in Figure 1 (all

24、 measurements in mm). b) Dissolve the external enamel with the solvent. c) Pour NaOH solution into the container in a quantity sufficient to cover the tube. d) Place the container under the extract fan. e) Immerse the tube in the NaOH solution. f) With the tweezers remove the lacquer film and rinse

25、with water. g) Dry the film between two sheets of filter paper. Then place the film in the oven for 1 h at 80 C. 6.3 Measurement procedure After cooling, the thickness of the lacquer film is measured at a temperature of between 10C and 25C with the micrometer. These measurements shall be taken at th

26、e different points indicated in Figure 1. BS EN 13048:2009EN 13048:2009 (E) 6 Key a Head of tube b Measuring points d1=d1 d2= 5 - 10 mm d3= 10 -20 mm Figure 1 Measuring points 7 Test report The report of the measurement shall contain the following information: a) reference to this standard and if ne

27、cessary a specification for the method of sampling and acceptance of the batch; b) complete identification of the batch and of the tubes checked; c) description and dimensions of the samples; d) identification of the test instrument; e) nature of the internal lacquer; f) results of the film thicknes

28、s at the different points of measurement; g) number of samples checked; h) number of defects. A defect is any tube with an internal lacquer film thickness that falls outside the specified or agreed limits (see 7a); i) if necessary, acceptance or refusal of the batch depending on the specifications (

29、see 7a); BS EN 13048:2009EN 13048:2009 (E) 7 j) all factors which can have affected the results and which are not specified in this standard; k) date, place of test and name of tester. BS EN13048:2009BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8

30、996 - British Standards InstitutionBSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. User

31、s of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of our products and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis British Standard would inform the Secretary of

32、 the technical committeeresponsible, the identity of which can be found on the inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Buyi

33、ng standardsOrders for all BSI, international and foreign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on the Website http:/ response to orders for intern

34、ational standards, it is BSI policy to supply theBSI implementation of those that have been published as British Standards,unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European andinternational standards through its Library and its Technica

35、l Help to ExportersService. Various BSI electronic information services are also available whichgive details on all its products and services. Contact Information Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standards development

36、sand receive substantial discounts on the purchase price of standards. For detailsof these and other benefits contact Membership Administration. Tel: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British StandardsOnline can be found a

37、t http:/ information about BSI is available on the BSI website at http:/.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in theUK, of the publications of the international standardization bodies. Except aspermitted under the Copyright, Designs and Patents Act 1988

38、no extract maybe reproduced, stored in a retrieval system or transmitted in any form or by anymeans electronic, photocopying, recording or otherwise without prior writtenpermission from BSI.This does not preclude the free use, in the course of implementing the standard,of necessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email: