EN 13164-2012 en Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification (Incorporates Amendment A1 2015)《建筑保温产品 工厂生产挤塑聚苯乙.pdf

1、BSI Standards PublicationBS EN 13164:2012Thermal insulation productsfor buildings Factory madeextruded polystyrene foam(XPS) products SpecificationBS EN 13164:2012+A1:2015BS EN 13164:2012+A1:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13164:2012+A1:2015

2、. It supersedes BS EN 13164:2012, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by .The UK part

3、icipation in its preparation was entrusted to Technical Committee B/540, Energy performance of materials components and buildings.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provision

4、s of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 86753 8ICS 91.100.60Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published u

5、nder the authority of the Standards Policy and Strategy Committee on 28 February 2013.Amendments/corrigenda issued since publicationDate Text affected31 March 2015 Implementation of CEN amendment A1:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13164:2012+A1 February 2015 ICS 91.100.60 Su

6、persedes EN 13164:2012English Version Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification Produits isolants thermiques pour le btiment - Produits manufacturs en mousse de polystyrne extrud (XPS) - Spcification Wrmedmmstoffe fr Gebude - We

7、rkmig hergestellte Produkte aus extrudiertem Polystyrolschaum (XPS) - Spezifikation This European Standard was approved by CEN on 6 October 2012 and includes Amendment 1 approved by CEN on 15 December 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the

8、 conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard

9、exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national

10、 standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovaki

11、a, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means r

12、eserved worldwide for CEN national Members. Ref. No. EN 13164:2012+A1:2015 EEN 13164:2012+A1:2015 (E) 2 Contents Page Foreword 5 1 Scope 7 2 Normative references 7 3 Terms, definitions, symbols, units, abbreviated terms .8 3.1 Terms and definitions .8 3.2 Symbols, units and abbreviated terms 9 4 Req

13、uirements 11 4.1 General . 11 4.2 For all applications . 12 4.2.1 Thermal resistance and thermal conductivity . 12 4.2.2 Length, width, squareness, flatness . 12 4.2.3 Thickness 13 4.2.4 Reaction to fire of the product as placed on the market 13 4.2.5 Durability characteristics . 13 4.3 For specific

14、 applications 14 4.3.1 General . 14 4.3.2 Dimensional stability under specified conditions . 14 4.3.3 Deformation under specified compressive load and temperature conditions . 14 4.3.4 Compressive stress or compressive strength 15 4.3.5 Tensile strength perpendicular to faces 15 4.3.6 Compressive cr

15、eep . 16 4.3.7 Water absorption 16 4.3.8 Freeze-thaw resistance 17 4.3.9 Water vapour transmission . 17 4.3.10 Release of dangerous substances 18 4.3.11 Reaction to fire of the product in standardized assemblies simulating end-use applications . 18 4.3.12 Continuous glowing combustion 18 4.3.13 Shea

16、r strength . 18 5 Test methods . 18 5.1 Sampling 18 5.2 Conditioning 18 5.3 Testing . 19 5.3.1 General . 19 5.3.2 Thermal resistance and thermal conductivity . 19 6 Designation code 21 7 Assessment and Verification of the Constancy of Performance (AVCP) . 22 7.1 General . 22 7.2 Product Type Determi

17、nation (PTD) . 22 7.3 Factory Production Control (FPC) 22 8 Marking and labelling . 22 Annex A (normative) Determination of the declared values of thermal resistance and thermal conductivity . 24 A.1 General . 24 A.2 Input data . 24 BS EN 13164:2012+A1:2015EN 13164:2012+A1:2015 (E)EN 13164:2012+A1:2

18、015 (E) 2 Contents Page Foreword 5 1 Scope 7 2 Normative references 7 3 Terms, definitions, symbols, units, abbreviated terms .8 3.1 Terms and definitions .8 3.2 Symbols, units and abbreviated terms 9 4 Requirements 11 4.1 General . 11 4.2 For all applications . 12 4.2.1 Thermal resistance and therm

19、al conductivity . 12 4.2.2 Length, width, squareness, flatness . 12 4.2.3 Thickness 13 4.2.4 Reaction to fire of the product as placed on the market 13 4.2.5 Durability characteristics . 13 4.3 For specific applications 14 4.3.1 General . 14 4.3.2 Dimensional stability under specified conditions . 1

20、4 4.3.3 Deformation under specified compressive load and temperature conditions . 14 4.3.4 Compressive stress or compressive strength 15 4.3.5 Tensile strength perpendicular to faces 15 4.3.6 Compressive creep . 16 4.3.7 Water absorption 16 4.3.8 Freeze-thaw resistance 17 4.3.9 Water vapour transmis

21、sion . 17 4.3.10 Release of dangerous substances 18 4.3.11 Reaction to fire of the product in standardized assemblies simulating end-use applications . 18 4.3.12 Continuous glowing combustion 18 4.3.13 Shear strength . 18 5 Test methods . 18 5.1 Sampling 18 5.2 Conditioning 18 5.3 Testing . 19 5.3.1

22、 General . 19 5.3.2 Thermal resistance and thermal conductivity . 19 6 Designation code 21 7 Assessment and Verification of the Constancy of Performance (AVCP) . 22 7.1 General . 22 7.2 Product Type Determination (PTD) . 22 7.3 Factory Production Control (FPC) 22 8 Marking and labelling . 22 Annex A

23、 (normative) Determination of the declared values of thermal resistance and thermal conductivity . 24 A.1 General . 24 A.2 Input data . 24 EN 13164:2012+A1:2015 (E) 3 A.3 Declared values . 24 A.3.1 General . 24 A.3.2 Case where thermal resistance and thermal conductivity are declared . 24 A.3.3 Case

24、 where only thermal resistance is declared . 25 Annex B (normative) !Product type determination“ (!PTD“) and Factory production control (FPC) 26 Annex C (normative) Determination of the aged values of thermal resistance and thermal conductivity . 30 C.1 General . 30 C.2 Procedure for XPS foam withou

25、t diffusion tight facings 30 C.2.1 Principle 30 C.2.2 Sample preparation . 30 C.2.3 Procedure . 30 C.3 Procedure for XPS foam for use with diffusion tight facing on both sides 31 C.3.1 Principle 31 C.3.2 Ageing procedure 31 C.4 Determination of value after ageing: “aged value” 31 C.4.1 Determination

26、 of aged value for XPS products without diffusion tight facings on both sides 31 C.4.2 Determination of aged value for XPS products for use with diffusion tight facing on both sides 32 C.5 Blowing agent 33 C.6 Product grouping 33 Annex D (normative) XPS multi-layered insulation products 34 D.1 Gener

27、al . 34 D.2 Requirements . 34 D.2.1 For all applications 34 D.2.2 For specific applications 35 D.3 Test methods . 35 D.4 Evaluation of conformity 35 Annex E (informative) Additional properties 36 E.1 General . 36 E.2 Behaviour under cyclic loading . 36 E.3 Compressive modulus of elasticity . 36 E.4

28、Bending strength . 36 E.5 Determination of volume percentage of closed cells 36 Annex F (informative) Plan for cutting test specimen . 38 Annex ZA (informative) !Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation“ 40 ZA.1 Scope and relevant charact

29、eristics . 40 BS EN 13164:2012+A1:2015EN 13164:2012+A1:2015 (E)EN 13164:2012+A1:2015 (E) 4 ZA.2 Procedures for AVCP of factory made extruded polystyrene products . 41 ZA.2.1 Systems of AVCP 41 ZA.2.2 Declaration of Performance (DoP) 45 ZA.3 CE Marking and labelling . 48 Bibliography . 50 Tables Tabl

30、e 1 Tolerances of length, width, squareness and flatness 13 Table 2 Classes for thickness tolerances . 13 Table 3 Dimensional stability under specified conditions 14 Table 4 Levels for deformation under specified compressive load and temperature conditions 15 Table 5 Levels for compressive stress or

31、 compressive strength 15 Table 6 Levels for tensile strength, perpendicular to faces . 16 Table 7 Levels for long term water absorption by total immersion . 16 Table 8 Levels for long term water absorption by diffusion . 17 Table 9 Test methods, test specimens and conditions. 19 Table A.1 Values for

32、 k for one sided 90 % tolerance interval with a confidence level of 90 % . 25 Table B.1 Minimum number of tests for !PTD“ and minimum product testing frequencies . 26 Table B.2 Minimum product testing frequencies for the reaction to fire characteristics . 28 Table E.1 Test methods, test specimens, c

33、onditions and minimum testing frequencies . 37 Table ZA.1 Relevant clauses for factory made extruded polystyrene foam and intended use 40 Table ZA.2 Systems of AVCP . 42 Table ZA.3.1 Assignment of AVCP tasks for factory made extruded polystyrene foam products under system 1 for reaction to fire and

34、system 3 (see Table ZA.2) . 42 Table ZA.3.2 Assignment of AVCP tasks for factory made extruded polystyrene foam products under system 3 (see Table ZA.2) . 44 Table ZA.3.3 Assignment of AVCP tasks for factory made extruded polystyrene foam products under combined system 4 for reaction to fire and sys

35、tem 3 (see Table ZA.2) . 44 Figures Figure ZA.1 Example CE marking information of products under AVCP system 3“ . 49 BS EN 13164:2012+A1:2015EN 13164:2012+A1:2015 (E)EN 13164:2012+A1:2015 (E) 4 ZA.2 Procedures for AVCP of factory made extruded polystyrene products . 41 ZA.2.1 Systems of AVCP 41 ZA.2

36、.2 Declaration of Performance (DoP) 45 ZA.3 CE Marking and labelling . 48 Bibliography . 50 Tables Table 1 Tolerances of length, width, squareness and flatness 13 Table 2 Classes for thickness tolerances . 13 Table 3 Dimensional stability under specified conditions 14 Table 4 Levels for deformation

37、under specified compressive load and temperature conditions 15 Table 5 Levels for compressive stress or compressive strength 15 Table 6 Levels for tensile strength, perpendicular to faces . 16 Table 7 Levels for long term water absorption by total immersion . 16 Table 8 Levels for long term water ab

38、sorption by diffusion . 17 Table 9 Test methods, test specimens and conditions. 19 Table A.1 Values for k for one sided 90 % tolerance interval with a confidence level of 90 % . 25 Table B.1 Minimum number of tests for !PTD“ and minimum product testing frequencies . 26 Table B.2 Minimum product test

39、ing frequencies for the reaction to fire characteristics . 28 Table E.1 Test methods, test specimens, conditions and minimum testing frequencies . 37 Table ZA.1 Relevant clauses for factory made extruded polystyrene foam and intended use 40 Table ZA.2 Systems of AVCP . 42 Table ZA.3.1 Assignment of

40、AVCP tasks for factory made extruded polystyrene foam products under system 1 for reaction to fire and system 3 (see Table ZA.2) . 42 Table ZA.3.2 Assignment of AVCP tasks for factory made extruded polystyrene foam products under system 3 (see Table ZA.2) . 44 Table ZA.3.3 Assignment of AVCP tasks f

41、or factory made extruded polystyrene foam products under combined system 4 for reaction to fire and system 3 (see Table ZA.2) . 44 Figures Figure ZA.1 Example CE marking information of products under AVCP system 3“ . 49 EN 13164:2012+A1:2015 (E) 5 Foreword This document (EN 13164:2012+A1:2015) has b

42、een prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2015, and

43、 conflicting national standards shall be withdrawn at the latest by November 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. Thi

44、s document supersedes !EN 13164:2012“. This document includes Amendment 1 approved by CEN on 2014-12-15. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. This document has been prepared under a mandate given to CEN by the European Commission and th

45、e European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Construction Products Regulation (CPR), see informative Annex ZA, which is an integral part of this standard.“ Compared with EN 13164:2008, the main changes are: a) better harmonisati

46、on between the individual standards of the package (EN 13162 to EN 13171) on definitions, requirements, classes and levels; b) new normative annex on multi-layered products; c) changes of some editorial and technical content and addition of information on some specific items such as for XPS: Annex C

47、; d) addition to links to EN 15715, Thermal insulation products Instructions for mounting and fixing for reaction to fire testing Factory made products; e) changes to the Annex ZA. !Amendment 1 modifies EN 13164:2012 identifying those clauses of the standard which are needed for the compliance of th

48、e European Standard with the Construction Products Regulation (CPR). This amendment introduces f) an addition to the foreword; g) an addition in 3.2; h) a new subclause 4.3.10; i) modification of Clause 7; j) modification of Clause 8; k) modification of Annex B; BS EN 13164:2012+A1:2015EN 13164:2012

49、+A1:2015 (E)EN 13164:2012+A1:2015 (E) 6 l) modification of Annex E; m) a new Annex ZA.“ This European Standard is one of a series of standards for thermal insulation products used in buildings, but this standard may be used in other areas where appropriate. In pursuance of resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a package of documents. The package of standards comprises the following group of interrelated standards for the specificati