EN 13168-2012 en Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification (Incorporates Amendment A1 2015)《建筑保温产品 工厂使木丝(WW)产品规范》.pdf

1、BSI Standards PublicationThermal insulation products for buildings Factory made wood wool (WW) products SpecificationBS EN 13168:2012+A1:2015BS EN 13168:2012+A1:2015National forewordThis British Standard is the UK implementation of EN 13168:2012+A1:2015. It supersedes BS EN 13168:2012, which is with

2、drawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted to

3、 Technical Committee B/540, Energy performance of materials components and buildings.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for it

4、s correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 86749 1ICS 91.100.60Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy an

5、d Strategy Committee on 28 February 2013.Amendments/corrigenda issued since publicationDate Text affected31 March 2015 Implementation of CEN amendment A1:2015BRITISH STANDARDEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13168:2012+A1 February 2015 ICS 91.100.60 Supersedes EN 13168:2012English

6、 Version Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification Produits isolants thermiques pour le btiment - Produits manufacturs en laine de bois (WW) - Spcification Wrmedmmstoffe fr Gebude - Werkmig hergestellte Produkte aus Holzwolle (WW) - Spezifikatio

7、n This European Standard was approved by CEN on 6 October 2012 and includes Amendment 1 approved by CEN on 15 December 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard wi

8、thout any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any othe

9、r language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic,

10、Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMI

11、TTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13168:2012+A1:2015 E2 Cont

12、ents Page Foreword 4 1 Scope 6 2 Normative references 6 3 Terms, definitions, symbols, units and abbreviated terms .7 3.1 Terms and definitions .7 3.2 Symbols, units and abbreviated terms 9 4 Requirements 11 4.1 General . 11 4.2 For all applications . 11 4.3 For specific applications 15 5 Test metho

13、ds . 19 5.1 Sampling 19 5.2 Conditioning 19 5.3 Testing . 19 6 Designation code 21 7 Assessment and Verification of the Constancy of Performance (AVCP) . 22 7.1 General . 22 7.2 Product Type Determination (PTD) . 22 7.3 Factory Production Control (FPC) 23 8 Marking and labelling . 23 Annex A (normat

14、ive) Determination of the declared values of thermal resistance and thermal conductivity . 25 A.1 General . 25 A.2 Input data . 25 A.3 Declared values. 25 Annex B (normative) !Product type determination“ (!PTD“) and factory production control (FPC) . 28 Annex C (normative) WW multi-layered insulatio

15、n products 32 C.1 General . 32 C.2 Requirements 32 C.3 Test methods . 33 C.4 Evaluation of conformity 33 Annex D (normative) Specific test methods 34 D.1 Chloride content . 34 D.2 Load resistance. 34 D.3 Impact resistance 35 Annex E (normative) Determination of the thermal conductivity in relation t

16、o moisture content. 37 Annex ZA (informative) !Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation“ 39 ZA.1 Scope and relevant characteristics 39 BS EN 13168:2012+A1:2015 EN 13168:2012+A1:2015 (E)3 ZA.2 Procedures for AVCP of factory made wood wool

17、products 40 ZA.3 CE Marking and labelling 47 Bibliography 49 Tables Table 1 Classes for length and width tolerances . 12 Table 2 Classes for thickness tolerances . 13 Table 3 Levels for deviation from flatness 13 Table 4 Levels for chloride content . 13 Table 5 Levels for tensile strength perpendicu

18、lar to faces . 14 Table 6 Levels for the deviation from squareness . 15 Table 7 Levels for compressive stress or compressive strength. 16 Table 8 Levels for bending strength 17 Table 9 Levels for short term water absorption 17 Table 10 Test methods, test specimens and conditions . 20 Table A.1 Value

19、s for k for one sided 90 % tolerance interval with a confidence level of 90 % . 27 Table B.1 Minimum product testing frequencies 28 Table B.2 Minimum product testing frequencies for the reaction to fire characteristics (1 of 2) 30 Table ZA.1 Relevant clauses for factory made wood wool and intended u

20、se . 39 Table ZA.2 Systems of AVCP . 41 Table ZA.3.1 Assignment of AVCP tasks for factory made wood wool products under system 1 for reaction to fire and system 3 (see Table ZA.2) . 41 Table ZA.3.2 Assignment of AVCP tasks for factory made wood wool products under system 3 (see Table ZA.2) . 43 Tabl

21、e ZA.3.3 Assignment of AVCP tasks for factory made wood wool products under combined system 4 for reaction to fire and system 3 (see Table ZA.2) 43 Figures Figure D.1 Test rig for load resistance of slabs . 35 Figure D.2 Test rig for impact resistance of slabs . 36 Figure E.1 Example of a graphic re

22、presentation of “f” . 38 Figure ZA.1 Example CE marking information of products under AVCP system 1 and system 3“ . 48 BS EN 13168:2012+A1:2015 EN 13168:2012+A1:2015 (E)4 Foreword This document (EN 13168:2012+A1:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials a

23、nd products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2015, and conflicting national standards shall be withdrawn at the latest by November

24、2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes !EN 13168:2012“. This document includes Amendment 1 app

25、roved by CEN on 2014-12-15. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU

26、Directive(s). !For relationship with EU Construction Products Regulation (CPR), see informative Annex ZA, which is an integral part of this standard.“ Compared with EN 13168:2008, the main changes are: a) better harmonisation between the individual standards of the package (EN 13162 to EN 13171) on

27、definitions, requirements, classes and levels; b) new normative annex on multi-layered products; c) changes on some editorial and technical content and addition of information on some specific items such as for MW: lamella, compressibility, etc; d) addition of links to EN 15715, Thermal insulation p

28、roducts Instruction for mounting and fixing for reaction to fire testing Factory made products; e) changes of Annex ZA. !Amendment 1 modifies EN 13168:2012 identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation

29、 (CPR). This amendment introduces f) an addition to the foreword; g) an addition in 3.2; h) an addition in 4.3.12; i) modification of Clause 7; j) modification of Clause 8; k) modification of Annex B; BS EN 13168:2012+A1:2015 EN 13168:2012+A1:2015 (E)5 l) a new Annex ZA.“ This standard is one of a s

30、eries of standards for insulation products used in buildings, but this standard may be used in other areas where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a package of documents. The package of standards comprises the f

31、ollowing group of interrelated standards for the specifications of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 13162, Thermal insulation products for buildings Factory made mineral wool (MW) products Specification EN 13163, Thermal insulation product

32、s for buildings Factory made expanded polystyrene (EPS) products Specification EN 13164, Thermal insulation products for buildings Factory made extruded polystyrene foam (XPS) products Specification EN 13165, Thermal insulation products for buildings Factory made rigid polyurethane foam (PU) product

33、s Specification EN 13166, Thermal insulation products for buildings Factory made phenolic foam (PF) products Specification EN 13167, Thermal insulation products for buildings Factory made cellular glass (CG) products Specification EN 13168, Thermal insulation products for buildings Factory made wood

34、 wool (WW) products Specification EN 13169, Thermal insulation products for buildings Factory made expanded perlite board (EPB) products Specification EN 13170, Thermal insulation products for buildings Factory made products of expanded cork (ICB) Specification EN 13171, Thermal insulation products

35、for buildings Factory made wood fibre (WF) products Specification The reduction in energy used and emissions produced during the installed life of insulation products exceeds by far the energy used and emissions made during the production and disposal processes. According to the CEN/CENELEC Internal

36、 Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Irela

37、nd, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13168:2012+A1:2015 EN 13168:2012+A1:2015 (E)6 1 Scope This European Standard specifies the requirements for factory ma

38、de wood wool (WW) products, with or without facings or coatings, which are used for the thermal insulation of buildings. The products are manufactured in the form of boards or slabs. This European Standard also specifies the requirements for the factory made composite products, made from wood wool i

39、n combination with other insulation materials. This European Standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this European Standard are also used in prefabricated thermal insulation systems and compo

40、site panels; the performance of systems incorporating these products is not covered. This standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels and classes required for a given applicati

41、on are to be found in regulations or non-conflicting standards. Products with a declared thermal resistance lower than 0,15 m2K/W or a declared thermal conductivity greater than 0,100 W/(mK) at 10 C are not covered by this standard. This European Standard does not cover in situ insulation products a

42、nd products intended to be used for the insulation of building equipment and industrial installations. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition ci

43、ted applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 822, Thermal insulating products for building applications Determination of length and width EN 823, Thermal insulating products for building applications Determination of thickn

44、ess EN 824, Thermal insulating products for building applications Determination of squareness EN 825, Thermal insulating products for building applications Determination of flatness EN 826, Thermal insulating products for building applications Determination of compression behaviour EN 1602, Thermal

45、insulating products for building applications Determination of the apparent density EN 1604, Thermal insulating products for building applications Determination of dimensional stability under specified temperature and humidity conditions EN 1605, Thermal insulating products for building applications

46、 Determination of deformation under specified compressive load and temperature conditions EN 1606, Thermal insulating products for building applications Determination of compressive creep EN 1607, Thermal insulating products for building applications Determination of tensile strength perpendicular t

47、o faces EN 1609, Thermal insulating products for building applications Determination of short term water absorption by partial immersion BS EN 13168:2012+A1:2015 EN 13168:2012+A1:2015 (E)7 EN 12086:1997, Thermal insulating products for building applications Determination of water vapour transmission

48、 properties EN 12089, Thermal insulating products for building applications Determination of bending behaviour EN 12090, Thermal insulating products for building applications Determination of shear behaviour EN 12430, Thermal insulating products for building applications Determination of behaviour u

49、nder point load EN 12667, Thermal performance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Products of high and medium thermal resistance EN 12939, Thermal performance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Thick products of high and medium thermal resistance EN 13172:201