EN 13171-2012 en Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification (Incorporates Amendment A1 2015)《建筑保温产品 工厂生产木纤维(WF)产品规范》.pdf

1、BSI Standards PublicationBS EN 13171:2012Thermal insulation products for buildings Factory made wood fibre (WF) products SpecificationBS EN 13171:2012+A1:2015BS EN 13171:2012+A1:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13171:2012+A1:2015. It supersed

2、es BS EN 13171:2012, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by .The UK participation in

3、its preparation was entrusted by Technical Committee B/540, Energy performance of materials components and buildings, to Subcommittee B/540/6, Fibrous and inorganic thermal insulation materials.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This

4、publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 86747 7ICS 91.100.60Compliance with a British Standard cannot confer im

5、munity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2013.Amendments/corrigenda issued since publicationDate Text affected30 April 2015 Implementation of CEN amendment A1:2015EUROPEAN STANDARD NORME EUROPE

6、NNE EUROPISCHE NORM EN 13171:2012+A1 February 2015 ICS 91.100.60 Supersedes EN 13171:2012English Version Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification Produits isolants thermiques pour le btiment - Produits manufacturs en fibres de bois (WF) - Spci

7、fication Wrmedmmstoffe fr Gebude - Werksmig hergestellte Produkte aus Holzfasern (WF) - Spezifikation This European Standard was approved by CEN on 6 October 2012 and includes Amendment 1 approved by CEN on 15 December 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations w

8、hich stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This

9、European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN member

10、s are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal

11、 Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form

12、and by any means reserved worldwide for CEN national Members. Ref. No. EN 13171:2012+A1:2015 EEN 13171:2012+A1:2015 (E) 2 Contents Page Foreword 4 1 Scope 6 2 Normative references 6 3 Terms, definitions, symbols, units and abbreviated terms .8 3.1 Terms and definitions .8 3.2 Symbols, units and abbr

13、eviated terms 8 4 Requirements 11 4.1 General . 11 4.2 For all applications . 11 4.3 For specific applications 13 5 Test methods . 19 5.1 Sampling 19 5.2 Conditioning 19 5.3 Testing . 19 6 Designation code 22 7 Assessment and Verification of the Constancy of Performance (AVCP) . 23 7.1 General . 23

14、7.2 Product Type Determination (PTD) . 23 7.3 Factory Production Control (FPC) 23 8 Marking and labelling . 23 Annex A (normative) Determination of the declared values of thermal resistance and thermal conductivity . 25 A.1 General . 25 A.2 Input data . 25 A.3 Declared values. 25 A.3.1 General . 25

15、A.3.2 Case where thermal resistance and thermal conductivity are declared . 25 A.3.3 Case where only thermal resistance is declared . 26 Annex B (normative) !Product type determination“ (!PTD“) and factory production control (FPC) . 28 Annex C (normative) WF multi-layered thermal insulation products

16、 . 32 C.1 General . 32 C.2 Requirements 32 C.2.1 For all applications . 32 C.2.2 For specific applications 33 C.3 Test methods . 33 C.4 Evaluation of conformity 33 Annex D (normative) Determination of the thermal conductivity in relation to moisture content 34 Annex E (informative) Additional proper

17、ties . 36 BS EN 13171:2012+A1:2015EN 13171:2012+A1:2015 (E)EN 13171:2012+A1:2015 (E) 2 Contents Page Foreword 4 1 Scope 6 2 Normative references 6 3 Terms, definitions, symbols, units and abbreviated terms .8 3.1 Terms and definitions .8 3.2 Symbols, units and abbreviated terms 8 4 Requirements 11 4

18、1 General . 11 4.2 For all applications . 11 4.3 For specific applications 13 5 Test methods . 19 5.1 Sampling 19 5.2 Conditioning 19 5.3 Testing . 19 6 Designation code 22 7 Assessment and Verification of the Constancy of Performance (AVCP) . 23 7.1 General . 23 7.2 Product Type Determination (PTD

19、) . 23 7.3 Factory Production Control (FPC) 23 8 Marking and labelling . 23 Annex A (normative) Determination of the declared values of thermal resistance and thermal conductivity . 25 A.1 General . 25 A.2 Input data . 25 A.3 Declared values. 25 A.3.1 General . 25 A.3.2 Case where thermal resistance

20、 and thermal conductivity are declared . 25 A.3.3 Case where only thermal resistance is declared . 26 Annex B (normative) !Product type determination“ (!PTD“) and factory production control (FPC) . 28 Annex C (normative) WF multi-layered thermal insulation products . 32 C.1 General . 32 C.2 Requirem

21、ents 32 C.2.1 For all applications . 32 C.2.2 For specific applications 33 C.3 Test methods . 33 C.4 Evaluation of conformity 33 Annex D (normative) Determination of the thermal conductivity in relation to moisture content 34 Annex E (informative) Additional properties . 36 EN 13171:2012+A1:2015 (E)

22、 3 E.1 General . 36 E.2 Bending strength . 36 E.3 Shear strength . 36 Annex F (informative) Examples for the determination of the declared values of thermal resistance and thermal conductivity for a product or a product group 37 F.1 Case where both thermal resistance and thermal conductivity are dec

23、lared . 37 F.2 Case where only thermal resistance is declared . 38 Annex ZA (informative) !Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation“ 40 ZA.1 Scope and relevant characteristics . 40 ZA.2 Procedures for AVCP of factory made wood fibre produ

24、cts 42 ZA.3 CE Marking and labelling 49 Bibliography 51 Tables Table 1 Level and classes for thickness tolerances 12 Table 2 Dimensional stability under specified temperature and humidity conditions . 13 Table 3 Levels for compressive stress or compressive strength. 14 Table 4 Levels for tensile str

25、ength perpendicular to faces . 15 Table 5 Levels for short term water absorption by partial immersion . 16 Table 6 Classes for thickness tolerances . 17 Table 7 Levels for compressibility . 17 Table 8 Test methods, test specimens and conditions . 20 Table A.1 Values for k for one sided 90 % toleranc

26、e interval with a confidence level of 90 % 26 Table B.1 Minimum number of tests for ITT and minimum product testing frequencies 28 Table B.2 Minimum product testing frequencies for the reaction to fire characteristics 30 Table E.1 Test methods, test specimens, conditions and minimum testing frequenc

27、ies . 36 Table F.1 test results . 37 Table F.2 R test results 38 Table ZA.1 Relevant clauses for factory made wood fibre and intended use . 40 Table ZA.2 Systems of AVCP . 42 Table ZA.3.1 Assignment of AVCP tasks for factory made wood fibre products under system 1 for reaction to fire and system 3 (

28、see Table ZA.2) . 43 Table ZA.3.2 Assignment of AVCP tasks for factory made wood fibre products under system 3 (see Table ZA.2) . 44 Table ZA.3.3 Assignment of AVCP tasks for factory made wood fibre products under combined system 4 for reaction to fire and system 3 (see Table ZA.2) 45 Figures Figure

29、 D.1 Example of a graphic representation of “f” . 35 Figure ZA.1 Example CE marking information of products under AVCP system 3 50 BS EN 13171:2012+A1:2015EN 13171:2012+A1:2015 (E)EN 13171:2012+A1:2015 (E) 4 Foreword This document (EN 13171:2012+A1:2015) has been prepared by Technical Committee CEN/

30、TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2015, and conflicting national standards shall be

31、 withdrawn at the latest by November 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a man

32、date given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Construction Products Regulation (CPR), see informative Annex ZA, which is an integral part of this standard.“ This document superse

33、des !EN 13171:2012“. This document includes Amendment 1 approved by CEN on 2014-12-15. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. Compared with EN 13171:2008, the main changes are: a) better harmonisation between the individual standards of t

34、he package (EN 13162 to EN 13171) on definitions, requirements, classes and levels; b) new normative annex on multi-layer products; c) changes of some editorial and technical content and addition of information on some specific items such as for WF: determination of thermal conductivity in relation

35、to moisture content, thickness, compressive stress or compressive strength, tensile strength perpendicular to faces; d) addition of links to EN 15715, Thermal insulation products Instructions for mounting and fixing for reaction to fire testing Factory made products; e) changes of Annex ZA. !Amendme

36、nt 1 modifies EN 13171:2012 identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). This amendment introduces f) an addition to the foreword; g) an addition in 3.2; h) a new subclause 4.3.15; i) modificat

37、ion of Clause 7; j) modification of Clause 8; BS EN 13171:2012+A1:2015EN 13171:2012+A1:2015 (E)EN 13171:2012+A1:2015 (E) 4 Foreword This document (EN 13171:2012+A1:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held b

38、y DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2015, and conflicting national standards shall be withdrawn at the latest by November 2016. Attention is drawn to the possibility that

39、 some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association,

40、 and supports essential requirements of EU Directive(s). !For relationship with EU Construction Products Regulation (CPR), see informative Annex ZA, which is an integral part of this standard.“ This document supersedes !EN 13171:2012“. This document includes Amendment 1 approved by CEN on 2014-12-15

41、 The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. Compared with EN 13171:2008, the main changes are: a) better harmonisation between the individual standards of the package (EN 13162 to EN 13171) on definitions, requirements, classes and levels; b

42、) new normative annex on multi-layer products; c) changes of some editorial and technical content and addition of information on some specific items such as for WF: determination of thermal conductivity in relation to moisture content, thickness, compressive stress or compressive strength, tensile s

43、trength perpendicular to faces; d) addition of links to EN 15715, Thermal insulation products Instructions for mounting and fixing for reaction to fire testing Factory made products; e) changes of Annex ZA. !Amendment 1 modifies EN 13171:2012 identifying those clauses of the standard which are neede

44、d for the compliance of the European Standard with the Construction Products Regulation (CPR). This amendment introduces f) an addition to the foreword; g) an addition in 3.2; h) a new subclause 4.3.15; i) modification of Clause 7; j) modification of Clause 8; EN 13171:2012+A1:2015 (E) 5 k) modifica

45、tion of Annex B; l) a new Annex ZA.“ This European Standard is one of a series of standards for insulation products used in buildings, but this standard may be used in other areas where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed

46、below as a package of European Standards, setting 21 months after availability as the date of withdrawal (dow) of national standards which conflict with the European Standards of this package. The package of standards comprises the following group of interrelated standards for the specifications of

47、factory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 13162, Thermal insulation products for buildings Factory made mineral wool (MW) products Specification EN 13163, Thermal insulation products for buildings Factory made expanded polystyrene (EPS) products Sp

48、ecification EN 13164, Thermal insulation products for buildings Factory made extruded polystyrene foam (XPS) products Specification EN 13165, Thermal insulation products for buildings Factory made rigid polyurethane foam (PU) products Specification EN 13166, Thermal insulation products for buildings

49、 Factory made phenolic foam (PF) products Specification EN 13167, Thermal insulation products for buildings Factory made cellular glass (CG) products Specification EN 13168, Thermal insulation products for buildings Factory made wood wool (WW) products Specification EN 13169, Thermal insulation products for buildings Factory made expanded perlite board (EPB) products Specification EN 13170, Thermal insulation products for buildings Factory made products of expanded cork (ICB) Spe