1、BS EN 1319:2009ICS 97.100.20NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDDomestic gas-firedforced convectionair heaters for spaceheating, with fan-assisted burners notexceeding a net heatinput of 70 kWThis British Standardwas published under theauthority of t
2、he StandardsPolicy and StrategyCommittee on 28 February2010. BSI 2010ISBN 978 0 580 58505 0Amendments/corrigenda issued since publicationDate CommentsBS EN 1319:2009National forewordThis British Standard is the UK implementation of EN 1319:2009. Itsupersedes BS EN 1319:1999 which is withdrawn.The UK
3、 participation in its preparation was entrusted to TechnicalCommittee GSE/20/4, Air heaters (gas).A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are respons
4、ible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.BS EN 1319:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1319 December 2009 ICS 97.100.20 Supersedes EN 1319:1998English Version Domestic gas-fired forced convection air heater
5、s for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW Gnrateurs dair chaud convection force utilisant les combustibles gazeux pour le chauffage de locaux usage dhabitation, comportant des brleurs avec ventilateur de dbit calorifique infrieur ou gal 70 kW (sur pouvoir
6、 calorifique infrieur) Warmlufterzeuger mit erzwungener Konvektion zum Beheizen von Rumen fr den huslichen Gebrauch, mit geblseuntersttzten Gasbrennern mit einer Nennwrmebelastung gleich oder kleiner als 70 kW This European Standard was approved by CEN on 1 November 2009. CEN members are bound to co
7、mply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Manag
8、ement Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as t
9、he official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slova
10、kia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide
11、for CEN national Members. Ref. No. EN 1319:2009: EBS EN 1319:2009EN 1319:2009 (E) 2 Contents Page Foreword 41 Scope 62 Normative references 63 Terms and definitions .83.1 Appliance and its constituent parts .83.2 Adjustment, control and safety devices . 113.3 Operation of the appliance 133.4 Gases .
12、 163.5 Conditions of operation and measurement . 183.6 Marking of the appliance and packaging . 194 Classification of systems . 194.1 Classification according to the nature of the gases used (Categories) 194.2 Classification according to the gases capable of being used . 194.3 Classification accordi
13、ng to the mode of evacuation of the combustion products . 215 Construction and design requirements . 235.1 General . 235.2 Adjusting, control and safety devices 305.3 Ignition devices . 375.4 Flame supervision system . 375.5 Start-gas flame establishment . 385.6 Main flame establishment 415.7 Main b
14、urner . 415.8 Facility for remote control . 415.9 Thermostats and control of air temperature 425.10 Gas pressure test points 426 Operational requirements 436.1 Safety of operation . 436.2 Efficiency . 517 Test methods . 527.1 General . 527.2 Construction and design . 617.3 Safety of operation . 617.
15、4 Efficiency . 918 Marking and instructions . 998.1 Marking of the appliance 998.2 Marking of the packaging 1008.3 Utilization of symbols on the appliance and packaging . 1018.4 Instructions . 1039 Evaluation of POCED conformity and their associated terminals . 1059.1 General . 1059.2 Type testing .
16、 1059.3 Factory production control (FPC) . 106Annex A (informative) National situations . 108A.1 General . 108A.2 Categories listed in the body of the standard and marketed in different countries 108A.3 Appliance supply pressures corresponding to the categories given in A.2 110A.4 Special categories
17、 marketed nationally or locally 111BS EN 1319:2009EN 1319:2009 (E) 3 A.5 Test gases corresponding to the special categories given in A.4 . 117A.6 Gas connections in the various countries 120A.7 Flue connections in the various countries . 122Annex B (informative) Equivalence rules . 123B.1 Conversion
18、 to categories within a restricted Wobbe index range . 123B.2 Conversion to categories within an identical Wobbe index range. 123B.3 Conversion to categories within a wider Wobbe index range 124Annex C (normative) Classification according to the evacuation of the combustion . 125C.1 Type B1. 125C.2
19、Type B2. 126C.3 Type B4. 127C.4 Type B5. 129C.5 Type C1. 130C.6 Type C3. 131Annex D (normative) Requirements and tests for the ducting of C6appliances . 132D.1 Requirements . 132D.2 Test methods . 132Annex E (informative) A-deviations 136E.1 General . 136E.2 Switzerland . 136Annex F (normative) Spec
20、ial national conditions . 137F.1 General . 137F.2 Belgium. 137F.3 Italy 137F.4 Poland . 137Annex G (informative) Identification of gas types in use in various countries 138Annex H (informative) National solutions for countries whose national bodies are Affiliate Members of CEN 139H.1 Categories list
21、ed in the body of the standard and marketed in different countries 139H.2 Appliance supply pressures corresponding to the categories given in H.1 . 139H.3 Special categories marketed nationally or locally . 139H.4 Gases and test pressures corresponding to the special categories given in H.3 139Annex
22、 I (informative) Calculation of conversions of NOx. 140Annex J (informative) An example of sampling plans 141J.1 Sampling plans 141J.2 Inspection levels and procedures . 142Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 90/396/EEC .
23、143Annex ZB (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive . 145ZB.1 Scope and relevant characteristics . 145ZB.2 Procedure(s) for attestation of conformity of construction products . 147ZB.3 CE marking and labelling 150Bibliograph
24、y 152BS EN 1319:2009EN 1319:2009 (E) 4 Foreword This document (EN 1319:2009) has been prepared by Technical Committee CEN/TC 180 “Domestic and non-domestic gas-fired air heaters and non-domestic gas-fired overhead radiant heaters”, the secretariat of which is held by AFNOR. This European Standard sh
25、all be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at the latest by June 2010. Attention is drawn to the possibility that some of the elements of this document
26、 may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1319:1998. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association
27、, and supports essential requirements of EC Directive(s). For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document. This revision modifies EN 1319:1998. It has been prepared to incorporate requirements for combustion products evacuation duct
28、s, POCEDs, supplied as an integral part of the system to support the EU Directive 89/106/EEC on construction products under mandate M105. To this end it extends the scope of the standard to cover type B4 and B5 appliances. Furthermore, the opportunity presented by this revision has been taken to upd
29、ate the standard in respect to EN 437:2003. NOTE For countries requesting special categories (specified in EN 437), the absence of specific information concerning A.4.3 and A.4.4 implies that the general requirements described in the body of the standard (see 5.1.1, 5.2.2, 5.2.3 and 5.2.5) also appl
30、y to these special categories. Other European Standards covering gas-fired air heaters are: EN 525, Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW EN 621, Non-domestic gas-fired forced convection air heaters for space heating no
31、t exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products EN 778, Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and
32、/or combustion products EN 1020, Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products EN 1196, Domestic and non-domestic gas-fired air heaters Supplementar
33、y requirements for condensing air heaters EN 12669, Direct gas-fired hot air blowers for use in greenhouses and supplementary non-domestic space heating BS EN 1319:2009EN 1319:2009 (E) 5 According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countrie
34、s are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
35、Sweden, Switzerland and the United Kingdom. BS EN 1319:2009EN 1319:2009 (E) 6 1 Scope This European Standard specifies the requirements and test methods for the safety and efficiency of domestic gas-fired air heaters with a fan to assist the transportation of combustion air and/or combustion product
36、s, hereafter referred to as appliances. This European Standard applies to Type B12, B12AS, B12BS, B13, B13AS, B13BS, B14, B14AS, B14BS, B22, B23, B42, B42AS, B42BS, B43, B43AS, B43BS, B44, B44AS, B44BS, B52, B53, C12, C13, C32, C33, C62and C63appliances with an input not exceeding 70 kW (net cv basi
37、s), intended primarily for use in single unit residential dwellings. Provision of the heated air may be by means of ducting. This standard does not apply to: a) appliances of the condensing type; b) appliances for outdoor installation; c) dual purpose air conditioning appliances (heating and cooling
38、); d) appliances where the air is heated by an intermediate fluid; e) appliances with forced draught package burners or fully premixed burners; f) appliances fitted with a manual means of adjusting the combustion air supply or the evacuation of the combustion products; g) portable or transportable f
39、orced convection appliances; h) appliances having multiple heating units with a single draught diverter; i) appliances fitted with more than one flue outlet; j) Type C22, C23, C42, C43, C52and C53appliances; k) appliances that are designed for continuous condensation within the flue system under nor
40、mal operating conditions; l) appliances having combustion products evacuation ducts, POCEDs, that are non-metallic. This standard is applicable to appliances which are intended to be type tested. It also includes requirements concerning the evaluation of conformity, including factory production cont
41、rol, but these requirements only apply to POCEDs and their associated terminals. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the r
42、eferenced document (including any amendments) applies. EN 88-1:2007, Pressure regulators and associated safety devices for gas appliances Part 1: Pressure regulators for inlet pressures up to and including 500 mbar EN 125:1991, Flame supervision devices for gas burning appliances Thermo-electric fla
43、me supervision devices EN 126:2004, Multifunctional controls for gas burning appliances BS EN 1319:2009EN 1319:2009 (E) 7 EN 161:2007, Automatic shut-off valves for gas burners and gas appliances EN 257:1992, Mechanical thermostats for gas-burning appliances EN 298:2003, Automatic gas burner control
44、 systems for gas burners and gas burning appliances with or without fans EN 437:2003, Test gases Test pressures Appliance categories EN 1859:2000, Chimneys Metal chimneys Test methods EN 10226-1:2004, Pipe threads where pressure tight joints are made on the threads Part 1: Taper external threads and
45、 parallel internal threads Dimensions, tolerances and designation EN 10226-2:2005, Pipe threads where pressure tight joints are made on the threads Part 2: Taper external threads and taper internal threads Dimensions, tolerances and designation EN 12067-1:1998, Gas/air ratio controls for gas burners
46、 and gas burning appliances Part 1: Pneumatic types EN 60335-1:2002, Household and similar electrical appliances Safety Part 1: General requirements (IEC 60335-1:2001, modified) EN 60335-2-102:2006, Household and similar electrical appliances Safety Part 2-102: Particular requirements for gas, oil a
47、nd solid-fuel burning appliances having electrical connections (IEC 60335-2-102:2004, modified) EN 60529:1991, Degrees of protection provided by enclosures (IP code) (IEC 60529:1989) EN 60584-1:1995, Thermocouples Part 1: Reference tables (IEC 60584-1:1995) EN 60584-2:1993, Thermocouples; part 2: To
48、lerances (IEC 60584-2:1982 + A1:1989) EN 60730-2-1:1997, Automatic electrical controls for household and similar use Part 2: Particular requirements for electrical controls for electrical household appliances (IEC 60730-2-1:1989, modified) EN 60730-2-9:2002, Automatic electrical controls for househo
49、ld and similar use Part 2-9: Particular requirements for temperature sensing controls (IEC 60730-2-9:2000, modified) EN ISO 228-1:2003, Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) EN ISO 1182:2002, Reaction to fire tests for building products Non-combustibili
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1