EN 13209-2-2005 3125 Child use and care articles - Baby carriers - Safety requirements and test methods - Part 2 Soft carrier《儿童使用和保育用品 婴儿运载工具 安全要求和检验方法 第2部分 软的运载工具》.pdf

1、Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g4

2、0g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58requirements and test methods Part 2: Soft carrierThe European Standard EN 13209-2:2005 has the status of a British StandardICS 97.190Child use and care articles Baby carriers Safety BRITISH STANDARDBS EN 13209-2:2005BS EN 13209-2

3、:2005Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHSThis British Standard was published under the authority of the Standards Policy and Strategy Committee on 27 September 2005 BSI 27

4、 September 2005ISBN 0 580 46663 9-,-,-Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facili

5、ty of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard does not of itself confer immunity from legal obligations.Su

6、mmary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 16, an inside back cover and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date Comment

7、sA list of organizations represented on this committee can be obtained on request to its secretary.enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.National forewordThis Bri

8、tish Standard is the official English language version of EN 13209-2:2005.The UK participation in its preparation was entrusted to Technical Committee CW/41, Child use and care articles, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/E

9、uropean committee any EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 13209-2August 2005ICS 97.190English VersionChild use and care articles - Baby carriers - Safety requirementsand test methods - Part 2: Soft carrierArticles de puriculture - Porte-enfants - Exigences descurit et mthodes dessai -

10、Partie 2 : Porte-enfantsoupleArtikel fr Suglinge und Kleinkinder - Kindertragen -Sicherheitstechnische Anforderungen und Prfverfahren -Teil 2: Tragen ohne GestellThis European Standard was approved by CEN on 1 July 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which

11、stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard

12、exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bo

13、dies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR

14、STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13209-2:2005: ECopyright European Committee for St

15、andardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 13209-2:2005 (E) 2 Contents page Foreword 3 1 Scope .4 2 Normative references .4 3 Terms and definitions.4 4 General requirements .4 4.1 Multi-purpose products 4

16、4.2 Order of tests 4 4.3 Tolerances.5 5 Materials 5 5.1 Chemical properties5 5.2 Flammability5 5.3 Shrinkage.6 5.4 Monofilament threads.6 6 Construction7 6.1 Leg openings.7 6.2 Small parts.7 6.3 Cords, straps, belts and parts used as ties 9 6.4 Head support.9 6.5 Carers attachment system.9 6.6 Durab

17、ility of attachment systems9 6.7 Accessibility of fillings .11 7 Packaging14 8 Product information14 8.1 General 14 8.2 Marking 14 8.3 Durability of marking 14 8.4 Purchase information .14 8.5 Instructions for use.15 Annex A (informative) Head support.16 Copyright European Committee for Standardizat

18、ion Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 13209-2:2005 (E) 3 Foreword This European Standard (EN 13209-2:2005) has been prepared by Technical Committee CEN/TC 252 “Child use and care articles”, the secretariat of w

19、hich is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2006, and conflicting national standards shall be withdrawn at the latest by February 2006. According to the CEN/CEN

20、ELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Mal

21、ta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 13209-2:2005 (E)

22、4 1 Scope This European Standard specifies the safety requirements and test methods for soft carriers for children i.e. those carriers without a framed support. These carriers are designed to transport a child in an essentially vertical position whilst attached to the carers torso. It is essential t

23、hat the carriers are designed to allow the carer hands free operation when standing and/or walking. These carriers are for use with a minimum weight of child of 3,5 kg. 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For date

24、d references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 71-3, Safety of toys - Part 3: Migration of certain elements EN ISO 6941, Textile fabrics - Burning behaviour - Measurement of flame spread prope

25、rties of vertically oriented specimens (ISO 6941:2003) 3 Terms and definitions For the purposes of this European Standard, the following terms and definitions apply. 3.1 soft carrier product without a framed support designed to transport a child in an essentially vertical position whilst attached to

26、 the carers torso. It is essential that the product has holes designed to accommodate the childs legs 3.2 carers attachment system fastenings, straps and/or belts or similar parts which are fitted to or are part of the soft carrier for the purpose of securing the article to the carers torso 4 Genera

27、l requirements 4.1 Multi-purpose products If the carrier has other functions not covered in this European Standard, reference should be made to the relevant European Standard. 4.2 Order of tests Unless otherwise stated the specified tests shall be carried out on one sample in the order of the clause

28、 numbers in this standard. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 13209-2:2005 (E) 5 4.3 Tolerances Unless otherwise stated the following tolerances shall apply for t

29、esting and test equipment: forces shall have an accuracy of 5 %; masses shall have an accuracy of 1 %; dimensions shall have an accuracy of 1 mm; time measurements shall have an accuracy of 1 s; angles shall have an accuracy of 1. 5 Materials 5.1 Chemical properties Any surface coatings of paint, va

30、rnish, lacquer or similar substances and parts consisting of dyed materials, leather and textiles shall be made using products, which in their soluble compound do not exceed the following amounts. The migration of synthetic or natural elements from coatings of paint, varnish, lacquer, printing ink,

31、polymer and similar coatings, and other materials whether mass coloured or not shall comply with the following: Antimony : 60 mg/kg Arsenic : 25 mg/kg Barium : 1 000 mg/kg Cadmium : 75 mg/kg Chromium : 60 mg/kg Lead : 90 mg/kg Mercury : 60 mg/kg Selenium : 500 mg/kg When a surface is coated with a m

32、ulti-layer of paint or similar coating, the sample shall not include the substrate. A separate sample shall be used to assess these requirements. These limits shall be checked according to the test described in EN 71-3. 5.2 Flammability 5.2.1 Requirements When tested in accordance with 5.2.3 the max

33、imum rate of the spread of flame shall be 50 mm/s. A separate sample shall be used to assess this requirement. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 13209-2:2005 (E)

34、 6 5.2.2 Conditioning for flammability The soft carrier shall be washed, cleaned and dried twice in accordance with manufacturers instructions. The carrier shall be conditioned for at least 7 h in an environment temperature of (20 2) C and relative humidity (65 5) %. 5.2.3 Test equipment 5.2.3.1 Tes

35、t chamber A chamber with a maximum air movement of 0,2 m/s prior to the test. The air movement in the chamber shall not be affected by the operation of any mechanical apparatus during the test and the volume of air shall not be affected by the reduction in the level of oxygen concentration during th

36、e test. The temperature of the chamber shall be maintained in the range (10 and 30) C with a relative humidity between (15 and 80)% prior to the test. 5.2.3.2 Ignition source The test flame shall be obtained from the burner described in EN ISO 6941 operated with either butane or propane gas as appro

37、priate. The burner shall have a flame of (20 2) mm measured from the end of the burner tube to the top of the flame with the burner in a vertical position. 5.2.4 Test method The soft carrier shall be tested as intended to be worn by the carer, i.e. fully assembled. The carrier shall be suspended ver

38、tically by means of the shoulder straps of the carers attachment system. Any strap on the soft carrier shall be positioned to prevent the straps from affecting the results of the test. The soft carrier shall be positioned at least 300 mm from the walls of the test chamber detailed in 5.2.3.1. The so

39、ft carrier shall be tested within 5 min of its removal from the conditioning environment detailed in 5.2.2. The burner detailed in 5.2.3.2 shall be pre-heated for 2 min prior to the test. The flame shall be applied so that the distance between the edge of the burner tube and the soft carrier is (5 2

40、) mm the flame making contact with the outer facing of the soft carrier for 5 s. After removal of the flame, the time taken for the flame to spread on the surface of the soft carrier over the distance between the point of application and the upper edge of the burnt area shall be measured. 5.3 Shrink

41、age The carrier shall be washed and dried twice in accordance with the manufacturers instructions. Any resulting shrinkage shall not prevent any removable parts from being refitted without damaging the seams of the fabric and shall not impair the performance and use of the article. 5.4 Monofilament

42、threads Monofilament threads shall not be used. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 13209-2:2005 (E) 7 6 Construction 6.1 Leg openings 6.1.1 Requirements The minim

43、um size of the leg openings shall not allow the test sphere to pass completely through the leg opening when tested in accordance with 6.1.3. 6.1.2 Test equipment Test sphere made from a hard smooth material of diameter (120 2) mm and a mass of 2,27 kg. 6.1.3 Test method If the leg opening is adjusta

44、ble in size, it shall be tested at its minimum size as described in the manufacturers instructions. Ensure that the soft carrier is held so that no additional tension, which could restrict the passing of the sphere, is applied to the leg opening. Position the soft carrier so that the leg opening to

45、be tested is essentially horizontal. Gradually place the test sphere inside the leg opening and allow the sphere to rest in the leg opening for 1 min. 6.2 Small parts 6.2.1 Requirements Any components not intended to be detachable but which become detached when tested in accordance with 6.2.3 shall

46、not fit wholly within the small parts cylinder (Figure 1). Any component intended to be removable without the use of a tool shall not fit wholly within the small parts cylinder (Figure 1). 6.2.2 Test equipment Means of applying a force up to at least 90 N with an accuracy of ( 2) N, such as a spring

47、 balance or a dead weight arrangement. Feeler gauge with thickness of (0,4 0,02) mm, with the end to be inserted having a radius of approximately 3 mm. Small parts cylinder with the dimensions given in Figure 1. Copyright European Committee for Standardization Provided by IHS under license with CENN

48、ot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 13209-2:2005 (E) 8 Dimensions in millimetres Figure 1 Small parts cylinder 6.2.3 Test method 6.2.3.1 Assessment of childs ability to grip components A component can be gripped by the child if it can firmly grasp the component between its thumb and forefinger or between its teeth. Where it is difficult to assess whether a child can grip a component, it shall be possible to insert the feeler gauge to a depth of at least 2 mm using a force of (10 1) N between the component an