EN 13224-2011 en Precast concrete products - Ribbed floor elements《预制混凝土产品 肋地板元素》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 13224:2011Precast concrete products Ribbed floor elementsBS EN 13224:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13224:2011.

2、It supersedes BS EN 13224:2004, which is withdrawn.The UK participation in its preparation was entrusted to T e c h n i c a l C o m m i t t e e B / 5 2 4 , P r e c a s t c o n c r e t e p r o d u c t s .A list of organizations represented on this committee can be obtained on request to its secretary

3、.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2012 ISBN 978 0 580 73138 9 ICS 91.100.30 Compliance with a British Standard cannot confer immunity from legal obligations.Th

4、is British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2012.Amendments issued since publicationDate T e x t a f f e c t e dBS EN 13224:2011EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13224 November 2011 ICS 91.100.30 Supersedes EN

5、13224:2004+A1:2007English Version Precast concrete products - Ribbed floor elements Produits prfabriqus en bton - Elments de plancher nervurs Betonfertigteile - Deckenplatten mit Stegen This European Standard was approved by CEN on 1 October 2011. CEN members are bound to comply with the CEN/CENELEC

6、 Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or t

7、o any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the offici

8、al versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slova

9、kia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide

10、for CEN national Members. Ref. No. EN 13224:2011: EBS EN 13224:2011EN 13224:2011 (E) 2 Contents Page Foreword 4Introduction .61 Scope 72 Normative references 73 Terms, definitions, and symbols 73.1 Terms and definitions .74 Requirements .84.1 Material requirements .84.2 Production requirements 84.3

11、Finished product requirements 84.3.1 Geometrical properties .84.3.2 Surface characteristics 104.3.3 Mechanical resistance 104.3.4 Resistance and reaction to fire . 114.3.5 Acoustic properties 114.3.6 Thermal properties . 114.3.7 Durability . 114.3.8 Other requirements. 115 Test methods . 125.1 Gener

12、al . 125.2 Tests on concrete . 125.3 Measuring of dimensions and surface characteristics 126 Evaluation of conformity 126.1 General . 126.2 Type testing . 126.3 Factory production control 126.4 Finished products . 127 Marking and labelling . 138 Technical documentation 13Annex A (informative) Exampl

13、es of elements . 14Annex B (normative) Minor floor elements 16B.1 General . 16B.2 Additional requirements for minor floor elements 16B.2.1 General . 16B.2.2 Dimensions 16B.2.3 Minimum strength of concrete 17B.3 Special rules for minor floor elements . 17B.3.1 Bearing length . 17B.3.2 Transverse load

14、 distribution . 18B.3.3 Detailing . 18Annex C (informative) Unintended negative moments . 20Annex D (informative) Thermal maps . 23Annex E (informative) Transverse load distribution . 27Annex F (informative) Diaphragm action . 28BS EN 13224:2011EN 13224:2011 (E) 3 Annex ZA (informative) Clauses of t

15、his European Standard addressing the provisions of the EU Construction Products Directive . 29ZA.1 Scope and relevant characteristics . 29ZA.2 Procedure for attestation of conformity of precast ribbed floor elements . 31ZA.2.1 System of attestation of conformity 31ZA.2.2 EC Certificate and Declarati

16、on of conformity . 32ZA.3 CE marking and labelling 33ZA.3.1 General . 33ZA.3.2 Declaration of geometrical data and material properties (method 1) 35ZA.3.3 Declaration of product properties (method 2) 37ZA.3.4 Declaration of compliance with a given design specification provided by the client (method

17、3a) 39ZA.3.5 Declaration of compliance with a given design specification provided by the manufacturer according to the clients order (method 3b) . 41Bibliography 43BS EN 13224:2011EN 13224:2011 (E) 4 Foreword This document (EN 13224:2011) has been prepared by Technical Committee CEN/TC 229 “Precast

18、concrete products”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2012, and conflicting national standards shall be withdrawn at the latest by Augu

19、st 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13224:2004+A1:2007. Significant technical changes

20、 compared to the previous version are: a) change in the scope to also cover elements with bottom slab (as shown in Annex A); b) deletion of the requirement on planarity (in 4.3.1.1 and 5.2); c) deletion of the requirement on camber or sag (in 4.3.1.1 and 5.2); d) addition of a rule for elements with

21、out shear reinforcement in 4.3.3.3; e) adoption of the new template for Annex ZA. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the Construction Products Directive (89/106/EEC) o

22、f the European Union (EU). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This standard is one of a series of product standards for precast concrete products. For common aspects, reference is made to EN 13369: Common rules for precast pro

23、ducts, from which also the relevant requirements of the EN 206-1: Concrete Part 1: Specification, performances, production and conformity are taken. The references to EN 13369 by CEN/TC 229 product standards are intended to make them homogeneous and to avoid repetitions of similar requirements. Euro

24、codes are taken as a common reference for design aspects. The installation of some structural precast concrete products is dealt with by EN 13670:2009 Execution of concrete structures. In all countries it can be accompanied by alternatives for national application. The programme of standards for str

25、uctural precast concrete products comprises the following standards, in some cases consisting of several parts: EN 1168, Precast concrete products Hollow core slabs EN 12794, Precast concrete products Foundation piles EN 12843, Precast concrete products Masts and poles BS EN 13224:2011EN 13224:2011

26、(E) 5 EN 13224, Precast concrete products Ribbed floor elements EN 13225, Precast concrete products Linear structural elements EN 13693, Precast concrete products Special roof elements EN 13747, Precast concrete products Floor plates for floor systems EN 13978, Precast concrete products Precast conc

27、rete garages EN 14843, Precast concrete products Stairs EN 14844, Precast concrete products Box culverts EN 14991, Precast concrete products Foundation elements EN 14992, Precast concrete products Wall elements EN 15037, Precast concrete products Beams for beam-and-block floor systems This standard

28、defines in Annex ZA the application methods of CE marking to products designed using the relevant EN Eurocodes (EN 1992-1-1 and EN 1992-1-2). Where, in default of applicability conditions of EN Eurocodes to the works of destination, design Provisions other than EN Eurocodes are used for mechanical s

29、trength and/or fire resistance, the conditions to affix CE marking to the product are described in ZA.3.4. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cro

30、atia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 13224:2011EN 13224:20

31、11 (E) 6 Introduction The evaluation of conformity given in this standard refers to the completed precast elements which are supplied to the market and covers all the production operations carried out in the factory. For design rules and resistance to fire, reference is made to EN 1992-1-1 and EN 19

32、92-1-2. Additional complementary rules are provided where necessary. 4.3.3 and 4.3.4 include specific provisions resulting from the application of EN 1992-1-1, and EN 1992-1-2 rules made specific for the concerned product. The use of these provisions is consistent with a design of works made with EN

33、 1992-1-1 and EN 1992-1-2. BS EN 13224:2011EN 13224:2011 (E) 7 1 Scope This document identifies the requirements, the basic performance criteria and evaluation of conformity for precast ribbed elements made of reinforced or prestressed normal weight concrete, used in floors or roofs. The elements co

34、nsist of a top and/or bottom slab and one or more (usually two) ribs; transverse ribs may also be present. Some examples of precast elements considered in this document are shown in Annex A. Specific requirements for minor floor elements are listed in Annex B. This document covers terminology, perfo

35、rmance criteria, tolerances, relevant physical properties, test methods and aspects of transport and erection. This document does not cover load-bearing capacity determined by testing. 2 Normative references The following referenced documents are indispensable for the application of this document. F

36、or dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1990:2002, Eurocode: Basis of structural design EN 1991-1-6:2005, Eurocode 1 Actions on structures Part 1-6: General actions Actions durin

37、g execution EN 1992-1-1:2004, Eurocode 2: Design of concrete structures Part 1-1: General rules and rules for buildings EN 1992-1-2:2004, Eurocode 2: Design of concrete structures Part 1-2: General rules Structural fire design EN 13369:2004, Common rules for precast concrete products 3 Terms, defini

38、tions, and symbols 3.1 Terms and definitions For the purposes of this document, the terms and definitions given in EN 1992-1-1:2004 and EN 13369:2004 and the following apply. 3.1.1 ribbed precast concrete element precast unit consisting in a slab stiffened by one or more ribs 3.1.2 minor floor eleme

39、nt ribbed precast floor elements having limited dimensions, which are in compliance with Annex B BS EN 13224:2011EN 13224:2011 (E) 8 4 Requirements 4.1 Material requirements For general aspects, reinforcing and prestressing steel, inserts and connectors, the relevant subclauses of EN 13369:2004, 4.1

40、 shall apply. For constituent materials of concrete EN 206-1 applies. In particular, the ultimate tensile and tensile yield strength of steel shall be considered. 4.2 Production requirements The production of precast ribbed elements shall comply with the requirements in EN 13369:2004, 4.2. NOTE In a

41、ddition to EN 13369:2004, 4.2.2 for cast-in-situ concrete considered to act compositely with precast units in the structural resistance (e.g. structural top layer), the minimum strength class is C 20/25. In particular, the compressive strength of concrete shall be considered. For minor floor element

42、s, strength classes shall comply with B.2.3. 4.3 Finished product requirements 4.3.1 Geometrical properties 4.3.1.1 Production tolerances Complementary to EN 13369:2004, 4.3.1.1 the following tolerances shall apply (Figure 1). BS EN 13224:2011EN 13224:2011 (E) 9 Figure 1 Reference points for standar

43、d check of tolerances DIMENSION PERMITTED DEVIATION (mm) Skewness () 15 Lateral bow ( ) 10 or L/1 000 (whichever is greater) Angular deviation of ribs () 15 Methods of measurements are given in 5.3. For prestressed elements the values of tolerance in lateral bow () and angular deviation of ribs () c

44、an be increased by 50 %; this includes the effect of prestressing tolerances. For minor floor elements according to Annex B, the permitted deviation on length is 25 mm. 4.3.1.2 Minimum dimensions EN 13369:2004, 4.3.1.2 shall apply. 4.3.1.3 Longitudinal connections If the precast units are connected

45、along their longitudinal edges by means of a cast in situ mortar or concrete joint, the minimum joint width shall be at least 30 mm at the top to allow satisfactory casting. The joint face shall be provided with at least one groove. The size shall be appropriate with regard to the shear resistance o

46、f the grout. If tie bars are to be anchored within the joint, the joint width at the tie bar level shall be at least three times the diameter of the bar to enable a satisfactory bond and a complete encasing of the bar. If welded connections are used, the connection devices should be designed in orde

47、r to allow an easy compensation of camber and erection deviations and welding execution. BS EN 13224:2011EN 13224:2011 (E) 10 4.3.1.4 Concrete cover For the protection against corrosion EN 13369:2004, 4.3.7 shall apply. For minor floor elements see Annex B. 4.3.2 Surface characteristics EN 13369:200

48、4, 4.3.2 shall apply. 4.3.3 Mechanical resistance 4.3.3.1 General EN 13369:2004, 4.3.3.1 to 4.3.3.5 shall apply except 4.3.3.4. For minor floor elements see Annex B. For transverse distribution of loads see Annex E. For diaphragm actions see Annex F. 4.3.3.2 Transient situations For transient situat

49、ions, EN 13369:2004, 4.3.3.6 shall apply. Unless compensating devices are used during lifting, each suspension point should be verified on the basis that only two are being active. In the erection phases in which the access of workers on the elements can be expected, the construction loads of EN 1991-1-6 shall be considered and the supports for safety devices shall withstand the appr