1、BS EN 13230-5:2016Railway applications Track Concrete sleepers and bearersPart 5: Special elementsBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 13230-5:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13230-5:2016.It
2、supersedes BS EN 13230-5:2009 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee RAE/2, Railway Applications - Track.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to inclu
3、de all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016. Published by BSI StandardsLimited 2016ISBN 978 0 580 84809 4ICS 91.100.30; 93.100Compliance with a British Standard cannot confer immunity fromlegal obligations.Thi
4、s British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 May 2016.Amendments issued since publicationDate Text affectedBS EN 13230-5:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13230-5 May 2016 ICS 91.100.30; 93.100 Supersedes EN 13230-5:2
5、009English Version Railway applications - Track - Concrete sleepers and bearers - Part 5: Special elements Applications ferroviaires - Voie - Traverses et supports en bton - Partie 5 : Elments spciaux Bahnanwendungen - Oberbau - Gleis- und Weichenschwellen aus Beton - Teil 5: Sonderformen This Europ
6、ean Standard was approved by CEN on 4 March 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references conce
7、rning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member int
8、o its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, G
9、ermany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE
10、FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13230-5:2016 EBS EN 13230-5:2016EN 13230-5:2016 (E) 2 Contents Page European foreword . 3 Introduction
11、 4 1 Scope 5 2 Normative references 5 3 Terms and definitions . 5 4 Requirements . 5 5 Product testing . 6 6 Manufacturing 6 7 Data to be supplied . 6 Annex A (informative) Definition of special elements Basic examples . 7 A.1 Prestressed concrete special elements . 7 A.1.1 Special sleepers . 7 A.1.
12、2 Special bearers . 7 A.2 Reinforced concrete special elements . 8 A.2.1 Special sleepers . 8 A.2.2 Blocks for ballastless tracks 8 BS EN 13230-5:2016EN 13230-5:2016 (E) 3 European foreword This document (EN 13230-5:2016) has been prepared by Technical Committee CEN/TC 256 “Railway applications”, th
13、e secretariat of which is held by DIN. This document supersedes EN 13230-5:2009. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2016, and conflicting national standards shall be withdraw
14、n at the latest by November 2016. This European Standard is one of the EN 13230 (series) “Railway applications Track Concrete sleepers and bearers”, which consist of the following parts: Part 1: General requirements; Part 2: Prestressed monoblock sleepers; Part 3: Twin-block reinforced sleepers; Par
15、t 4: Prestressed bearers for switches and crossings; Part 5: Special elements; Part 6: Design. There is a change in the wording of the documents of EN 13230 (series): “design bending moment” is replaced by “characteristic bending moment” and “test bending moment”. According to the CEN/CENELEC Intern
16、al Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ire
17、land, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13230-5:2016EN 13230-5:2016 (E) 4 Introduction This part of the EN 13230 series defines the specific requirements re
18、lating to special elements. These are additional requirements to EN 13230-1:2016 that are necessary to have a complete standard dealing with special elements. These special elements are prestressed concrete special elements as special sleepers or special bearers and reinforced concrete special eleme
19、nts. They are generally used within specific domains of the track for ballastless tracks, for bridges, or with check rails for instance. This part of EN 13230 defines additional technical criteria and control procedures related to manufacturing and testing special elements. It completes the requirem
20、ents of EN 13230-2:2016, EN 13230-3:2016 and EN 13230-4:2016. BS EN 13230-5:2016EN 13230-5:2016 (E) 5 1 Scope This part of the EN 13230 series defines additional technical criteria and control procedures for manufacturing and testing special elements. 2 Normative references The following documents,
21、in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13230-1:2016, Railway applica
22、tions Track Concrete sleepers and bearers Part 1: General requirements EN 13230-2:2016, Railway applications Track Concrete sleepers and bearers Part 2: Prestressed monoblock sleepers EN 13230-3:2016, Railway applications Track Concrete sleepers and bearers Part 3: Twin-block reinforced sleepers EN
23、13230-4:2016, Railway applications Track Concrete sleepers and bearers Part 4: Prestressed bearers for switches and crossings 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 13230-1:2016 and the following apply. 3.1 special element any individual conc
24、rete element supporting rails in the field of railway track construction, to which this standard is relevant, but which is not included in EN 13230-2:2016, EN 13230-3:2016 or EN 13230-4:2016 (slabs and longitudinal beams are excluded) 4 Requirements A special element shall be defined by detailed dra
25、wings including tolerances. All the tolerances specified in EN 13230-1:2016 which relate to the concrete elements, the rails, the fastening system and gauge shall be specified by the purchaser. The purchaser shall specify the positive and negative characteristic bending moments to be applied: a) at
26、the rail seat section; b) at the centre section or any relevant section. BS EN 13230-5:2016EN 13230-5:2016 (E) 6 5 Product testing EN 13230-1:2016, Clause 7, shall apply to any special element supporting rails for railway track applications. Depending on the type of element and whether the concrete
27、is prestressed or reinforced, the appropriate following clauses shall be for application: a) either EN 13230-2:2016, Clause 4; b) or EN 13230-3:2016, Clause 4; c) or EN 13230-4:2016, Clause 5. If possible, the special parts of the element shall be checked according to the requirements of the purchas
28、er and the quality plan of the manufacturing unit. If not, the manufacturer shall have a special agreement with the purchaser in order to define the testing method. 6 Manufacturing Depending on the type of element and whether the concrete is prestressed or reinforced, the appropriate following claus
29、es shall be used: a) either EN 13230-2:2016, Clause 5; b) or EN 13230-3:2016, Clause 7; c) or EN 13230-4:2016, Clause 6. Any special requirement to be incorporated during the manufacturing process shall be defined by the purchaser. 7 Data to be supplied The purchaser shall supply all the data detail
30、ed in EN 13230-1:2016 and either EN 13230-2:2016, EN 13230-3:2016 or EN 13230-4:2016, in addition to any further special requirement. BS EN 13230-5:2016EN 13230-5:2016 (E) 7 Annex A (informative) Definition of special elements Basic examples A.1 Prestressed concrete special elements A.1.1 Special sl
31、eepers See EN 13230-2:2016: a) with conductor rail; b) with check rail; c) for dual gauge; d) for level crossing; e) for expansion joints; f) for guard rail; g) for ballastless track; h) for accommodating cables. A.1.2 Special bearers See EN 13230-4:2016: a) for dual gauge; b) for expansion joints;
32、c) for ballastless track; d) for hot-box detectors; e) for bridges; f) bearers for switches and crossings more than 8,5 m long; g) for accommodating cables. BS EN 13230-5:2016EN 13230-5:2016 (E) 8 A.2 Reinforced concrete special elements A.2.1 Special sleepers See EN 13230-3:2016: a) with conductor
33、rail; b) with check rail; c) for dual gauge; d) for level crossing; e) for guard rail; f) for ballastless track (twin-block or monoblock); g) for accommodating cables. A.2.2 Blocks for ballastless tracks See EN 13230-3:2016 which applies except for Clauses 5 and 6 (steel connecting bar) and Annex B
34、(steel connecting bar). This page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by
35、 BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled i
36、n a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about Brit
37、ish Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be
38、purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, including British Standards, is the property of and copyrighted by B
39、SI or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Save for the provisions below, you may not transfer, share or disseminate any portion of the
40、 standard to any other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent.Storing and using standardsStandards purchased in soft copy format: A British Standard purchased in
41、soft copy format is licensed to a sole named user for personal or internal company use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named user only and that only 1 copy is accessed at any one time. A single paper copy may be printed for personal o
42、r internal company use only.Standards purchased in hard copy format: A British Standard purchased in hard copy format is for personal or internal company use only. It may not be further reproduced in any format to create an additional copy. This includes scanning of the document.If you need more tha
43、n 1 copy of the document, or if you wish to share the document on an internal network, you can save money by choosing a subscription product (see Subscriptions).Reproducing extractsFor permission to reproduce content from BSI publications contact the BSI Copyright & Licensing team.SubscriptionsOur r
44、ange of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its avai
45、lable 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service excl
46、usive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host sta
47、ndards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendme
48、nt or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.Useful ContactsCustomer ServicesTel: +44 345 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 345 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Group Headquarters389 Chiswick High Road London W4 4AL UKBS
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1