EN 13277-5-2002 en Protective Equipment for Martial Arts - Part 5 Additional Requirements and Test Methods for Genital Protectors and Abdominal Protectors《武术防护设备 第5部分 生殖器和腹部保护器的附加要.pdf

1、BRITISH STANDARD Protective equipment for martial arts Part 5 : Additional requirements and test methods for genital protectors and abdominal protectors The European Standard EN 13277-5:2002 has the status of a British Standard ICs 13.340.10; 97.220.30 BS EN 13277-5 12002 Wk present to the responsib

2、le European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. - A list of organizations represented on this subcommittee can be obtained on request to its

3、secretary. Cr oss-r e fer enc e s The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BS

4、I Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary

5、 of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 15 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. O BSI 27 February 2002 ISBN O 580 39194 9 EUROPEAN STANDARD NORME EUROPENNE EUROPI

6、SCHE NORM EN 13277-5 January 2002 ICs 13.340.1 O English version Protective equipment for martial arts - Part 5: Additional requirements and test methods for genital protectors and a bd om i na1 p rotecto rs Equipement de protection pour les arts martiaux - Partie 5: Exigences et mthodes dessai comp

7、lmentaires relatives aux coquilles et aux protections abdominales Schutzausrstung fr den Kampfsport - Teil 5: Zustzliche Anforderungen und Prfverfahren fr den Genital- und Unterleibschutz This European Standard was approved by CEN on 28 December 2001. CEN members are bound to comply with the CENLENE

8、LEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN

9、 member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN memb

10、ers are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION EUROPISCHES KOMITEE F

11、R NORMUNG COMIT EUROPEN DE NORMALISATION Management Centre: rue de Stassart, 36 B-1050 Brussels O 2002 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13277-52002 E EN 13277-512002 (E) Contents page Foreword 3 1 Scope 4 2 Normative

12、 references 4 3 Terms and definitions 4 4 Requirements . 4 5 Test methods 8 6 Marking . 14 7 Information supplied by the manufacturer 14 Annex ZA (informative) other provisions of EU Directives 15 Clauses of this European Standard addressing essential requirements or 2 EN 13277-512002 (E) Foreword T

13、his European Standard has been prepared by Technical Committee CEN/TC 162 ”Protective clothing including hand and arm protection and lifejackets”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical t

14、ext or by endorsement, at the latest by July 2002, and conflicting national standards shall be withdrawn at the latest by July 2002. It is the fifth part of a series covering requirements for protective equipment used in martial arts. Part 1 deals with general requirements and test methods and the o

15、ther parts deal with specific areas of the body. Part 1 : General requirements and test methods. Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors Part 3: Additional requirements and test methods for trunk protectors. Part 4: Additional re

16、quirements and test methods for head protectors. Part 5: Additional requirements and test methods for genital protectors and abdominal protectors. Part 6: Additional requirements and test methods for breast protectors for females. This European Standard has been prepared under a mandate given to CEN

17、 by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this standard. According to the CENKENELEC Internal Regulations, the national sta

18、ndards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. 3

19、EN 13277-512002 (E) 1 Scope This European Standard specifies additional requirements and test methods for genital protectors and abdominal protectors used in unarmed martial arts such as Teakwondo, Karate, Kick-Boxing and similar disciplines. 2 Normative references This European Standard incorporate

20、s by dated or undated reference provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this standard on

21、ly when incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to applies (including amendments). EN 13277-1 :2000, Protective equipment for martial arts - Part I: General requirements and test methods. 3 Terms and definitions For the purp

22、oses of this European Standard, the terms and definitions given in EN 13277-1 and the following apply. 3.1 genital protector device worn to protect genitalia from impacts. 3.2 abdominal protector device worn to protect the abdomen below the waist from impacts. 4 Requirements 4.1 General The general

23、requirements for genital protectors and abdominal protectors shall be the same as those given in EN 13277-1. Edges of hard materials shall be covered with soft padding materials. Genital protectors for females shall be so designed that they adapt to the body shape of the wearer Abdominal protectors

24、and genital protectors may be used as a single piece or in combination (see 4.4). 4.2 Sizing 4.2.1 Genital protectors for females and males A sizing system shall be used to define genital protectors as small (S), medium (M), large (L) or extra large (XL). If additional sizes are available, their siz

25、e declaration shall be related to this sizing system. 4.2.2 Abdominal protectors for females and males Abdominal protectors shall be sized in relation of the size of the users in accordance with Table 1. 4 EN 13277-512002 (E) Size Table 1 - Sizing of abdominal protectors in relation to the size of t

26、he user Dimensions in centimetres Body height females I males XL I S I 152 I 164 176 188 I M I 152 to 164 I 164 to 176 I w I L I 164 to 176 I 176 to 188 Size S M L XL II 12 13 min. min. min. 25 150 15 35 170 19 45 190 23 55 21 o 27 4.3 Zone of protection 4.3.1 Genital protectors 4.3.1 .I Genital pro

27、tectors for females Figure 1 - Zone of protection of genital protectors for females Table 2 - Dimensions of the zone of protection of genital protectors for females Dimensions in millimetres 5 EN 13277-512002 (E) S M 4.3.1.2 Genital protectors for males 15 - - 30 52 34 55 - 10 - The minimum volume p

28、rotected by the genital protector shall be as given in Figure 2 and Table 3. Dimensions shall be graded linearly in case of additional sizes. L XL A A-A - - 38 61 5 41 65 - - - A a = size S b = size M c = size L d = size XL Figure 2 - Minimum volume protected by the genital protectors for males Tabl

29、e 3 - Dimensions of the minimum volume protected by of genital protectors for males Dimensions in millimetres 6 EN 13277-512002 (E) Size S M L XL 4.3.2 Abdominal protectors II 12 minimum minimum 230 55 250 60 270 65 290 70 4.3.2.1 General Abdominal protectors shall have a zone of protection covering

30、 the abdominal surface. If an abdominal protector is continous with a compatible genital protector no gap shall exist between the zone of protection of both protectors. 4.3.2.2 Dimensions The dimensions for the zone of protection of abdominal protectors shall be as given in Figure 3 and Table 4. Dim

31、ensions shall be graded linearly in case of additional sizes. I I Figure 3 -Zone of protection of abdominal protectors Table 4 - Dimensions for abdominal protectors Dimensions in millimetres 4.4 Combinations If combined use is allowed, the requirements specified for the individual protectors shall a

32、lso apply. If combined use is not intended by the manufacturer, this restriction shall be clearly indicated in the Information supplied by the manufacturer. Possible combinations shall be indicated in the Information supplied by the manufacturer 4.5 Restraint A restraint system shall be supplied by

33、the manufacturer which enables the user to attach genital protectors and abdominal protectors without any assistance. The restraint system shall meet the requirements defined in 4.3 of EN 13277-1:2000. 7 EN 13277-512002 (E) For genital protectors for males the third paragraph of 4.3 of EN 13277-1:20

34、00 does not apply. After each individual test, the displacement of genital protectors for males from their original position shall be less than 20 mm. 4.6 Impact performance 4.6.1 Genital protectors for females and abdominal protectors for females and males Genital protectors for females and abdomin

35、al protectors for females and males conform to this standard if the maximum peak force is below 3 kN when tested in accordance with 5.6.1. 4.6.2 Genital protectors for males Genital protectors for males conform to this standard if they meet the following requirements when tested in accordance with 5

36、.6.2: a) No part of the genital protector shall break or split. b) The plasticine cylinder used for testing shall not be deformed more than 2 mm after contacting the genital protector. c) The maximum peak force is below 3 kN. 5 Test methods 5.1 General If no special test methods are specified, the r

37、equirements of this European Standard are to be tested by measurement, visual inspection, tactile examination etc. For the tests new, unused protectorer shall be used. 5.2 Sampling Sampling shall be carried out in accordance with 5.1 of EN 13277-1:2000. 5.3 Conditioning Conditioning is carried out i

38、n accordance with 5.2 of EN 13277-1:2000. 5.4 Restraint Restraint testing of genital protectors and abdominal protectors for females and males shall be carried out as defined in 5.4 of EN 13277-1:2000. When testing the restraint the protector(s) shall be attached to the body of a test person or a du

39、mmy. The test force to be applied in any test position and test direction shall be 20 N. Test positions shall always be as close as possible on the limits of the zone of protection. They are defined in Figures 4, 5 and 6. Test directions shall be as shown by arrows in Figures 4, 5 and 6. They shall

40、be tangential to the surface of the body of the test person. 8 EN 13277-512002 (E) t 3 Key 1 to 4 Order of the test directions Figure 4 - Test positions and test directions at genital protectors for females Key 1 to 5 Order of the test directions X t 4 Figure 5 - Test positions and directions at gen

41、ital protectors for males 9 EN 13277-512002 (E) 1 t t 3 1 to 4 Order of the test directions Figure 6 - Test positions and test directions at abdominal protectors for females and males If a genital protector and an abdominal protector are inseparably connected, both shall be attached in accordance wi

42、th the Information supplied by the manufacturer. 5.5 Zone of protection 5.5.1 Genital protectors for females and abdominal protectors for females and males To measure the zone of protection the protector shall be placed flat. When tested according to EN 13277-1:2000, 5.5, the template shall be place

43、d on the inside of the protector within the zone of protection. 5.5.2 Genital protectors for males The minimum volume protected by the genital protector (see 4.3.2) shall be tested using a gauge. The shape and the dimensions of the gauge shall be identical with the values specified in Figure 2 and T

44、able 3. The gauge shall be placed into the inside of the genital protector within the zone of protection. It shall be inspected if all parts of the gauge are completely within the zone of protection. 5.6 Impact performance 5.6.1 Genital protectors for females and abdominal protectors for females and

45、 males 5.6.1 .I Apparatus The principle of impact testing is shown in Figure 7. A flat horizontal steel plate with a width of at least 300 mm, a length of at least 350 mm and a thickness of at least 20 mm shall be used as a support of the sample. In the centre of the flat plate there shall be a cyli

46、ndrical hole with a diameter of (106 f 2) mm. A cylindrical anvil with a diameter of (100 f 2) mm, a thickness of at least 20 mm with a flat upper surface shall be mounted on a load cell. The surface of the anvil facing the striker shall be in level with the surface of the flat plate with a toleranc

47、e of I1 mm. 10 EN 13277-512002 (E) A compression ring made of steel with a mass of (IO f 0,l) kg, (140 14) mm internal and (260 14) mm external diameter shall be used to fix the sample to the support. The striker shall be able to fall freely in the vertical axis of the anvil with a tolerance of f 2

48、mm. The striker shall be guided in such a way, that it will always reach at least 95 % of the freefall velocity. A means of measuring the velocity of the striker at the point of impact shall be provided. To measure the maximum peak force an electric measurement device with the following characterist

49、ics shall be used: - Measurement frequency: minimum 2 O00 Hz - Accuracy class of the load cell: 0,2 - Maximum load: 10 kN Dimensions in millimetres 26014 11tOIlt 10612 lOOI2 8012 4 - 4 w - F - F 4 w 1 / / , / / / 3 , / I / 1 E E .- O cI I I 30min. 30rnin. 350rnin. x 300rnin. F 1 Striker 2 Compression ring 3 Genital or abdominal protector 4 Steel plate 5 Anvil 6 Loadcell Figure 7 - Principle of impact testing of genital protectors for females and abdominal protectors for females and males 11 EN 13277-512002 (E) Dimension Height Diameter 5.6.1.2 Procedure Size of the