EN 13382-2002 en Flat pallets for materials handling - Principal dimensions《装卸材料用平板架 主要尺寸》.pdf

1、BRITISH STANDARD BS EN 13382:2002 Incorporating Corrigendum No. 1 Flat pallets for materials handling Principal dimensions The European Standard EN 13382:2002 has the status of a British Standard ICS 55.180.20 BS EN 13382:2002 This British Standard, having been prepared under the direction of the Co

2、nsumer Products and Services Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 18 April 2002 BSI 26 July 2002 ISBN 0 580 39594 4 National foreword This British Standard is the official English language version of EN 13382:2002.

3、The UK participation in its preparation was entrusted by Technical Committee PKW/5, Primary and transport packaging, to Subcommittee PKW/5/34, Pallets, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-referen

4、ces The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalog

5、ue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text;

6、 present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside fr

7、ont cover, the EN title page, pages 2 to 13 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments 14013 Corrigendum No. 1 26 July 2002 Identifier on pages 5 to 13 amendedEUROPEAN STA

8、NDARD NORME EUROPENNE EUROPISCHE NORM EN 13382 April 2002 ICS 55.180.20 English version Flat pallets for materials handling - Principal dimensions Palettes plates pour la manutention et le transport de marchandises - Dimensions principales Flachpaletten fr die Handhabung von Gtern - Hauptmae This Eu

9、ropean Standard was approved by CEN on 15 November 2001. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical reference

10、s concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its

11、 own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, S

12、pain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2002 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN nation

13、al Members. Ref. No. EN 13382:2002 EEN 13382:2002 (E) 2 Contents page Foreword .3 1 Scope5 2 Normative references5 3 Terms and definitions.5 4 Dimensions 5 4.1 Plan dimensions5 4.2 Vertical dimensions of the entries and openings for lifting devices .6 4.3 Horizontal dimensions of the entries and ope

14、nings for lifting devices 6 4.4 Profiling of bottom deck members6 4.5 Dimensions specific to wing pallets .6 4.6 Bearing surface of bottom deck 6 4.7 Squareness 7 4.8 Flatness7 4.9 Corner chamfer7 Annex A (normative) Nominal overall dimensions of non-modular sizes 12 A.1 Plan dimensions of non-modul

15、ar pallets12 A.2 Alternative plan sizes12 Bibliography13EN 13382:2002 (E) 3 Foreword This document (EN 13382:2002) has been prepared by Technical Committee CEN /TC 261 “Packaging“, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, eit

16、her by publication of an identical text or by endorsement, at the latest by October 2002, and conflicting national standards shall be withdrawn at the latest by October 2002. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound

17、to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Annex A is normative.EN 13382:2002 (E) 4 Introduction ISO 67

18、80 was primarily written for pallets for through transit only. This European Standard is based upon, but not identical to ISO 6780:1988, “General purpose flat pallets for through transit of goods Principal dimensions and tolerances”, with special changes to suit European handling systems. It is anti

19、cipated that these changes will be proposed to ISO/TC 51 for possible adoption in due course. In particular, the entry height changes made to ISO 509, “Pallet trucks Principal dimensions”, assume changes to ISO 6780, including a minimum height of entry of 95 mm. An increasing number of standardized

20、pallets are used in automatic storage retrieval machines or on automatic production lines, roller conveyers and wrapping devices. The minimum height of access for lifting devices as given in this European Standard may not be sufficient in all circumstances. The dimensional requirements should take i

21、nto account the requirements for fork lift and hand, pallet trucks, automatic storage retrieval machines and special telescopic fork system requirements. For these systems, the most commonly used pallets are those with 100 mm entry height. Widening of the scope of this European Standard has necessit

22、ated a removal of the normative requirement for stacking up to 4-high allowing for the widespread use of racking systems which permit single or 2-high stacking. The specifier can choose the appropriate level of stacking ability of 2- or 4- high. With regard to tolerances, this document allows for ma

23、nufacture from all materials and the need for both a manufacturing and a material movement tolerance.EN 13382:2001 (E) 5 1 Scope This European Standard specifies the principal dimensions and tolerances for new single-deck and double-deck non-reversible flat pallets of all entry types related to thei

24、r transportation and handling by pallet trucks, fork lift trucks and other appropriate equipment. NOTE Depending on end use and the meeting of tests specified in ISO 8611, such pallets are intended to be stacked: a) in store up to 4-high; b) in transit up to 2-high. 2 Normative references This Europ

25、ean Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications

26、apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN ISO 445:1998, Pallets for materials handling Vocabulary (ISO 445:1996) ISO 3394, Dimensions of rigid rect

27、angular packages Transport packages ISO 8611, General-purpose flat pallets for through transit of goods Test methods 3 Terms and definitions For the purposes of this European Standard, the terms and definitions in EN ISO 445:1998 and the following apply. 3.1 through transit pallet usage cycle which

28、anticipates that the full range of mechanical handling equipment may be applied at some stage of the journey 4 Dimensions 4.1 Plan dimensions 4.1.1 Nominal overall dimensions The nominal overall plan dimensions of pallets shall be as follows: a) commonly used modular sizes based upon plan module (M)

29、 specified in ISO 3394 of 600 mm 400 mm: 800 mm 1 200 mm (4M); 1200 mm 1 000 mm (5M); 1000 mm 1 200 mm (5M); b) other modular sizes: 800 mm 600 mm (2M) 1200 mm 1 200 mm (6M) c) non-modular sizes: see annex A. 4.1.2 Stringer or the stringerboard dimensions The stringer or the stringerboard dimension

30、is the pallet length and the length (L) is always quoted first in designating plan size. For pallets without stringers the longest dimension is the length. 4.1.3 Moisture content and temperature With sawn timber the dimensions stated relate to measurement at an average moisture content of (20 2) %.

31、For plastics, dimensions are measured at a temperature of (23 2) C.EN 13382:2001 (E) 6 4.1.4 Tolerances The tolerances on the nominal overall plan dimensions given in 4.1.1 shall be 3 mm or 0,4 %, whichever is the greater. 4.2 Vertical dimensions of the entries and openings for lifting devices 4.2.1

32、 Vertical entry apertures The vertical entry apertures for the forks of fork lift trucks and the fingers of pallet trucks shall be not less than 95 mm high (see Figure 1). NOTE For the pallets used in automatic storage and automatically driven conveyors, a minimum entry height of 100 mm is recommend

33、ed. 4.2.2 Distance from the underside of the lowest element of the top deck to the ground The distance from the underside of the lowest element of the top deck to the ground shall not exceed 156 mm for pallets of all designs see Figure 1c). If notches for the forks of fork lift trucks are provided,

34、the distance from the top of the notch to the ground shall be not less than 55 mm (see Figure 3). 4.3 Horizontal dimensions of the entries and openings for lifting devices 4.3.1 Board arrangement and horizontal dimensions The arrangements and horizontal dimensions of the entries for the forks of for

35、k lift trucks and the fingers of pallet trucks shall be as shown in Figure 4 and as specified in Table 1. 4.3.2 Board arrangements and dimensions of the openings in the bottom deck of pallets The arrangements and the dimensions of the openings in the bottom deck of pallets to allow the use of pallet

36、 trucks shall be as shown in Figure 4 and as specified in Table 1. 4.3.3 Centre blocks/stringers Centre blocks/stringers shall be positioned within 4 mm of the pallet centre line. For pallets with two or more intermediate stringers or rows of blocks the centre of the stringers or blocks shall be pos

37、itioned within 4 mm of their nominal position. 4.4 Profiling of bottom deck members To facilitate entry of the finger-wheels of a pallet truck, the thickness of the members of the bottom deck of a pallet shall not exceed 28 mm. If the thickness exceeds 16 mm, the leading and trailing edges of the me

38、mbers of the bottom deck shall be chamfered on each side of the top face as follows: a) the angle between the chamfered face and the horizontal shall be maximum 50, as shown in Figure 2a); b) the height of the vertical face of the member shall not exceed 16 mm, as shown in Figure 2a). Pallets not in

39、tended to be used for through transit are exempt from requirements for profiling. NOTE To aid the use of trucks when using the minimum (95 mm) entry height in 2-way entry pallets, stop chamfers should be considered (see Figure 2). 4.5 Dimensions specific to wing pallets Any projection of 65 mm or gr

40、eater shall be defined as a wing and therefore subject to the specific performance requirements for wing pallets given in ISO 8611, however, the overall (deck) sizes shall fall within the sizes given in 4.1. NOTE The nominal dimensions of the wing pallet are the overall dimensions, however dimension

41、s of the base apertures, entries and openings, are determined by the base plan dimensions. 4.6 Bearing surface of bottom deck 4.6.1 Double-deck pallets For double-deck pallets for stacking, the bearing surface of the element or elements of the bottom deck in contact with the payload directly below o

42、r with the ground shall be equal to or greater than 35 % of the nominal overall plan area. NOTE This value should be regarded as the absolute minimum and should be increased wherever practicable.EN 13382:2001 (E) 7 This value is for solid plane area; where plastic or steel pallets employ a non-conti

43、nuous or mesh design in the bottom bearing surface elements they shall have a minimum 1:3, ratio of contact: plane surface area. 4.6.2 Stacking Single-deck pallets shall not be stacked. 4.7 Squareness At the time of manufacture, the difference in length of the two plan diagonals shall not exceed 1 %

44、 of the nominal diagonal length. 4.8 Flatness At the time of manufacture no part of the top deck shall deviate more than 7 mm out of plane at the six measurement positions of Figure 5. 4.9 Corner chamfer Where a vertical chamfer is required on the corners of the pallet, it shall be at 45 5 with a fa

45、ce width of 10 mm minimum, as shown in Figure 2b). Alternatively, if corner chamfers are rounded, the radius shall be 10 mm minimum. Table 1 Horizontal dimensions of entries and bottom deck openings for two-way and four-way pallets (see figure 4) permitting the use of standardised pallet trucks with

46、 single or tandem trail wheels Nominal dimension of pallet Entries and openings L or WL 1and W 1 L 2and W 2 max. min. 600 160 580 800 160 580 1 000 160 710 1 100 160 710 1 140 160 710 1 200 160 710 1 300 160 710 NOTE W = 600 and W 2 = 580 apply to pressed sheet steel blocks. 1a) 4-way pallet with fr

47、ee entries Free entry not less than 95 mm, not more than 156 mmEN 13382:2001 (E) 8 1b) 2-way pallet with free entries 1c) 4-way pallet with two free entries 1d) 2-way pallet 1e) perimeter base pallet Figure 1 Typical two-way and four-way pallet designs illustrating vertical dimensions Free entry not

48、 less than 95 mm, not more than 156 mm Entry not less than 95 mm, not more than 156 mm Entry not less than 95 mm, not more than 156 mm Entry not less than 95 mm, not more than 156 mmEN 13382:2001 (E) 9 Dimensions in millimetres10 _ 2b) Corner chamfer detail Figure 2 Chamfer details Figure 3 Partial

49、four-way pallet illustrating minimum vertical dimensions W 1 W 2 W L 4a) Entries: two-way 55mm minEN 13382:2001 (E) 10 W 1 L 1 L 2 L W 2 W 4b) Entries: four-way W 2 L 2 L 1 W 1 4c) Openings: two-way W 1 W 2 L 2 L 1 4d) Openings: four-wayEN 13382:2001 (E) 11 W W 2 W 1 4e) Entries: two-way 4f) Entries: partial 4-way block type pallet with pallet truck access from arrowed direction only Figure 4 Horizontal dimensions of entries and bottom deck openings for