EN 13395-4-2002 en Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Determination of Workability - Part 4 Application of Repair Mortar Ove.pdf

1、BRITISH STANDARD BS EN 1 3 3 95-412002 Products and systems for the protection and repair of concrete structure s Test methods Determination of workability Part 4: Application of repair mortar overhe ad The European Standard EN 133954:2002 has the status ofa British Standard ICs 91.080.40; 91.100.30

2、 NO COPYING WITHOUT aSI PERMLSSION EXCEPT AS PERMITIED BY COPYRIGHT LAW British Standards BS EN 13395-412002 National foreword This British Standard is the official English language version of EN 133954:2002. The UKparticipation in its preparation was entrusted by Technical Committee B/5 17, Concret

3、e, to Subcommittee B/517/8, Protection and repair of concrete structures, which has the responsibility to: This British Standard, having been prepared under the direction of the Building and Civil Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Po

4、licy and Strategy Committee on 16 July 2002 - - aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments

5、and promulgate them in the UK. - A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under th

6、e section entitled “International Standards Correspondence Index”, or by using the “Search”faci1ity ofthe BSI Electronic Catalogue or ofBritish Stan dards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for their correct applicat

7、ion. Compliance with a British Standard does not ofitself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 7 and a back cover. The BSI copyright date displayed in this document indicates when the docu

8、ment was last issued. Amendments issued since publication Amd.No. I Date I Comments O BSI 16 July 2002 ISBN O 580 40091 3 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13395-4 May 2002 ICs 91.080.40; 91.100.30 English version Products and systems for the protection and repair of concrete stru

9、ctures - Test methods - Determination of workability - Part 4: Application of repair mortar overhead Produits et systmes pour la protection et la rparation des structures en bton - Mthodes dessai - Dtermination de la maniabilit - Partie 4: Application de mortier de rparation en sous-face Produkte un

10、d Systeme fr den Schutz und die Instandsetzung von Betontragwerken - Prfverfahren - Bestimmung der Verarbeitbarkeit -Teil 4: berkopfanwendung von Instandsetzungsmrtel This European Standard was approved by CEN on 4 January 2002 CEN members are bound to comply with the CENKENELEC Internal Regulations

11、 which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European S

12、tandard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national sta

13、ndards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION EUROPISCHES KOMITEE FR NORMUNG COMIT EUROPEN

14、DE NORMALISATION Management Centre: rue de Stassart, 36 B-1050 Brussels O 2002 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13395-4:2002 E EN 13395-4:2002 (E) Contents Page Foreword 3 1 Scope . .4 2 Normative references . .4 3 T

15、erms and definitions 4 . 4 Principle 4 5 Apparatus . 4 6 Test procedure . 5 7 Test report 5 Annex A (normative) Summary of temperatures and humidities for the curing, conditioning and 7 testing of repair products and systems 2 EN 13395-4:2002 (E) Foreword This document EN 13395-4:2002 has been prepa

16、red by Technical Committee CEN/TC 104 “Concrete and related products“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2002, and conflicting natio

17、nal standards shall be withdrawn at the latest by December 2002. It is one of a series of inter-related parts dealing with the workability of repair grouts, mortars and concretes. The other parts of this standard are: - Par 1: Producfs and sysfems for fhe profecfion and repair of concrefe sfrucfures

18、 - Tesf mefhods - Deferminafion of workabilify - Par 1: Tesf for flow of fhixofropic mortars. - Par 2: Producfs and sysfems for fhe profecfion and repair of concrefe sfrucfures - Tesf mefhods - Deferminafion of workabilify - Par 2: Tesf for flow of grouf or mortar. - Par 3: Producfs and sysfems for

19、fhe profecfion and repair of concrefe sfrucfures - Tesf mefhods - Deferminafion of workabilify - Par 3: Tesf for flow of concrefe. Annex A is normative. According to the CENKENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Europ

20、ean Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. 3 EN 13395-4:2002 (E) 1 Scope This European Standard specifies a method for determi

21、ning the applicability overhead of products and systems for the repair of concrete as defined in prEN 1504-3l under usual conditions. NOTE the possible effects of the operatives skill on site. This method can only demonstrate that products are capable of being applied overhead. It cannot take into a

22、ccount 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent amendments to o

23、r revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 196-1, Mefhods of fesfing cemenf - Par 1: Deferminafion of sfren

24、gfh. EN 1542, Producfs and sysfems for fhe repair and profecfion of concrefe sfrucfures - Tesf mefhods - Measurement of bond sfrengfh by pull off EN 1504-1, Producfs and sysfems for fhe profecfion and repair of concrefe sfrucfures - Definifions, requiremenfs, qualify con fro1 and evaluafion of confo

25、rmify - Par 1: Definifions. EN 1766, Producfs and sysfems for fhe profecfion and repair of concrefe sfrucfures - Tesf mefhods - Reference concrefes for fesfing. prEN 1504-3, Producfs and sysfems for fhe profecfion and repair of concrefe sfrucfures - Definifions, requiremenfs, qualify confrol and eva

26、luafion of conformify - Par 3: Sfrucfural and non-sfrucfural repair. IS0 554, Sfandard afmospheres for condifioning andlor fesfing - Specificafions. 3 Terms and definitions For the purposes of this European Standard, the terms and definitions contained in EN 1504-1 apply. 4 Principle The repair mort

27、ar or concrete is applied to overhead face of a prepared concrete substrate. After hardening, the pull-off strength is determined and taken for evaluation of overhead applicability. 5 Apparatus 5.1 Standard laboratory climate of (21 f 2) “C and 60 % f 10 % RH in accordance with EN 1542 (see annex A)

28、. 5.2 Concrete slabs for substrates MC (0,451) according to EN 1766, of dimensions 300 mm x 300 mm x 100 mm, with one grit blasted surface 300 mm x 300 mm. Under preparation. 4 EN 13395-4:2002 (E) 5.3 mortar or concrete. Mixer in accordance with EN 196-1 or forced action pan mixer for mixing the con

29、stituents of the repair 5.4 Rigid non absorbent panels for framework. 5.5 steel float for smoothing the surface. Trowel and tools to apply the mortar or concrete to the prepared concrete substrates (5.2), and a plasterers 5.6 Core drilling machine with a diamond tool, internal diameter 50 mm accordi

30、ng to EN 1542. 5.7 Pull-off equipment for measuring the pull-off strength, according to EN 1542. 6 Test procedure Two concrete slabs (see 5.2), conditioned in accordance with the manufacturers instructions, are mounted with the grit blasted surfaces at the bottom. NOTE 1 repair mortar or concrete. T

31、he substrates can be supported by form work on two sides (see 5.4) to ensure the required uniform thickness of The layer thickness shall be (20 f 2) mm for repair mortars up to 5 mm maximum particle size and (40 f 4) mm for repair materials with larger maximum particle sizes, unless recommended othe

32、rwise by the manufacturer. All materials shall be conditioned in the standard laboratory climate (5.1) for a period of not less than 24 hours prior to mixing. The repair mortar or concrete is mixed according to the manufacturers instructions. If no particular instructions are given, the maximum wate

33、r content should be applied in the case of CC and PCC. The repair mortar or concrete is applied to the overhead surface of the prepared substrates according to the manufacturers instructions. NOTE 2 If required, the substrates may be pre-wetted and/or a bonding aid used. After application to the req

34、uired layer thickness, the surface shall be finished with a steel float (5.5) to provide a smooth surface. The test specimens shall then be cured and stored according to annex A. After the cure periods (28 days for CC and PCC, 7 days for PC repair mortars - see annex A) the pull off strength shall b

35、e determined for each slab according to EN 1542. 7 Test report The test report shall include the following information: a) a reference to this European Standard, including the number, title and date of issue; b) name and address of the test laboratory; c) identification number and date of the test r

36、eport; d) name and address of the manufacturer or supplier of the product(s); e) name and identification marks or batch number of the product(s); f) date of supply of the product(s); g) date of preparation of the test specimens and any deviation from the prescribed method of preparation, including w

37、hether it is a single or multi layer system and whether a bonding agent was used; 5 EN 13395-4:2002 (E) h) conditions of storage of prepared specimens prior to test; i) date of test and details of test equipment used including the make, type and capacity and calibration details or identification num

38、ber of the apparatus; j) the test results (single values, mean values and standard deviations) of the pull off test including individual forms of fracture: k) precision data; i) date of test report and signature. 6 EN 13395-4:2002 (E) Annex A ( no rm a t ive) Summary of temperatures and humidities f

39、or the curing, conditioning and testing of repair products and systems A.l Curing A.l.l CC (grouts, mortars and concretes) - Prepare as EN 196-1, cover in film for 24 h; - Demould after 24 h; - Cure under water at (21 f 2) “C for 27 d. A.1.2 PCC (grouts, mortars and concretes) - Prepare as EN 196-1,

40、 cover in film for 24 h; - Demould after 24 h and wrap in film for 48 h; - Unwrap and cure for 25 d in a standard laboratory climate of (21 f 2) “C and (60 f IO) % RH. A.1.3 PC (grouts, mortars and concretes) - Prepare as IS0 554; - Cure for 7 d at (21 f 2) O C and (60 f IO)% RH. A.2 Conditioning an

41、d testing For specific applications, the following requirements apply: A.2.1 Standard laboratory climate (Dry conditioning) Take from the curing/storage environment and condition for 7 d in a standard laboratory climate of (21 f 2) “C and (60 f IO) % RH. A.2.2 Wet Conditioning - Immerse for 48 h at

42、(21 f 2) OC, or for CC take directly for test after 28 d of immersion; - Remove all surface water by standing upright for 30 min before using for tests. 7 BS EN 13395-412002 B SI 389 Chiswick High Road London w4 4AL BSI -British Standards Institution BSI is the independent national body responsible

43、for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments o

44、r editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on

45、the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards pu

46、blications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of tho

47、se that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information servic

48、es are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 71 11. Fax: +44 (0)20 8996 7048. Email: infomi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase

49、 price of standards. For details ofthese and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 700 1. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the int