EN 134-1998 de en fr Respiratory Protective Devices - Nomenclature of Components《呼吸器官保护装置 元部件命名》.pdf

1、- STD-BSI BS EN 134-ENGL 1996 I 1624bb9 Ob48bZb 649 BRITISH STANDARD Respiratory protective devices - Nomenclature of components The European Standard EN 134A998 has the status of a British Standard ICs 01.040.13;13.340.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS EN

2、1341998 - - STD-BSI BS EN 13Li-ENGL 1998 W LbZLibb ObAb27 585 Amd.No. BS EN 134:1998 Date Text affected This British Standard, having been prepared under the direction of the Health and Environment Sector Board, was published under the authority of the Standards Board and comes into effect on 15 May

3、 1998 Q BSI 1998 ISBN O 680 29866 6 National foreword This Briish Standard is the English language version of EN 134.1998. It supersedes BS EN 134A991 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee PW4, Respiratory protection, to Subcommittee PW41, T

4、erminology and selection, which has the responsibility to: - aid enquirers to understand the text; - present to the responsible European cornmitie any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; - monitor related international and European developmen

5、ts and promulgate them in the UK A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Stan& Catalogue un

6、der the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct

7、application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 24, an Wide back cover and a back cover. Amendments issued since publication ICs 01.

8、040.13 13.340.30 Supersedes EN 1341990 Descriptors: Personal protective equipment, accident prevention, respiratmy protective equipment, components, nomenclature, muitiiinguai nomenclature Enghh version Respiratory protective devices - Nomenclature of components &pare& de protection respiratoire - N

9、omenclature des composants Akmhu&k - Benennungen von Einzelteilen This European Standard was approved by CEN on 21 December 1997. CEN members are bound to comply with the CENKENELEC Internal Regulations which stipulak the conditions for giving this European Standard the status of a national standard

10、 without any alteration Up-to-date lists and bibliographical references concerning such national stan& may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (Engiish, French, German). Aversion in any other language ma

11、de by translation under the responsibility of a CEN member into its own language and notified to the Centsal Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germax Greece, Iceland,

12、Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. European Committee for Stan-on Comit Europen de Normalisation Europisches Komitee fur Normung Central Secretariat: rue de Stassart 36, B-1060 Brussels O 1998 CEN All rights of exploitation in an

13、y form and by any means reserved worldwide for GEN national Members. Ref. No. EN 134A998 E Page 2 EN 1W.1998 Foreword This European Standard has been prepared by khnical Committee CENiIC 79, Respiratory protective devices, the secretariat of which is held by DIN. This European Standard supersedes EN

14、 134A990. This European standard shall be given the status of a national standard, either by publication of an identid text or by endorsement, at the latest by July 1998, and conflicting national standards shall be withdrawn at the latest by July 1998. This European Standard has been prepared under

15、a mandate given to CEN by the European Commission and the European Free li-ade Association, and supports essential requirements of EU Directive). For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this standard. According to the CENKENELEC Internal Regulati

16、ons, the nationai standards organizations of the following countries are bound to implement this European Standasd. Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Ita& Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United

17、 Kingdom. Contents Foreword 1 Scope 2 Normative references 3 Nomenclature 3.1 Facepieces 3.2 Filtering devices 3.3 Breathkg apparatus Annex ZA (iormative) Clauses of this European Standard add.resing essential requirements or other provisions of EC Directives Page 2 3 3 5 5 9 15 24 O BSI 1998 STD-GS

18、I BS EN 13q-ENGL 1998 Lb24bb7 0678b30 07T 1 Scope This European Standard specifies a harmonized nomenclature for typical components of respiratory protective devices. It does not specify which or how many components are used and where they are located in the apparatus. The illustrations used are giv

19、en as examples only for the identification of the Merent parts and the corresponding terms for facilitating the application. The definitions and terms used are given in EN 132 and EN 135. The terms are given in the three officiai CEN languages. 2 Normative references This European Standard incorpora

20、tes, by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this Europea

21、n Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 132, Respiratory protective devices - Defnitions. EN 135, Respiratory ptective deuices - List of equivalent temns. EN 136, Respiratory protective dev

22、ices - FuU face mash - Requ.irements, testing, marking. EN 137, Respimtoqi protective devices - Self-contained open-circuit compressed air breathing apparatus - Requirements, testing, marking. EN 138, Respirntmy protective devices - Fresh air hose breathing apparatus for use with full face mask, hal

23、f mask or mouthpiece assembly - Requirements, EN 139, Rapiratory ptective deuices - Compressed air line breathing apparatus with full face mask, half mask or mouthpiece assembly - Requirements, testing, marking. EN 140, Respiratory protective devices - Half masks and quarter mash - Requirements, tes

24、ting, marking. EN 141, Respiratory protective detrices - Gbs fters and mnbinedfuters - Requirements, testing, marking. EN 142, Respiratoqj protective ceuices - Mouthpiece assemblies - Requirements, testing, marking. EN 143, Respiratory protective deuices - Partke testing, marking. filters - Requirem

25、ents, testing, maricing. Page 3 EN 1341998 EN 145, Respiratory protective devices - Self contained closed-circuit breathing apparatus, compressed oxygen type - Requirements, testing, marking. EN 146, Respimtory protective darices - Powered Requirements, testing, marking. EN 147, Respiratory protecti

26、ve devices - Power assisted filtering devices inco.rpomting fuU face mash, half masks or quam masks - Requirements, testing, marking, EN 149, Respiratory protective devicas - Ftering hhz mash against particks - Requirements, testing, marking. EN 250, Respiratory equipment - Open-circuit self-contain

27、ed cmpressd air diving apparatus - Requirements, testing, marking. EN 269, ReSpimtory protective devices - Powered fresh air hose breathing apparatus incorporating a hood - Requirements, testing, marking. EN 270, Rapiratory protective dev2ces - Compressed air line breathing apparatus incorporating a

28、 hood - Requirements, testing, marking. EN 271, Respiratory protective devices - Cmnpressed air line or powered fresh air hose breathing apparatus incorporating a hood for use in abrasive blasting operations - Requirements, testing, marking. EN 400, Respiratory protective devices for self-rescue - S

29、elj=contained closed-cimit breathing apparatus - Cmmsed oxygen escape apparatus - Requirements, testing, marking. EN 401, Rapiratory protective dauices for self-rescue - Self-contained closed-circuit breathing apparatus - chemzcal oxygen (KO2) escape apparatus - Requirements, testing, marking. EN 40

30、2, Respiratory protective devices for escape - Sdfcontained open-circuit compressed air breathing apparatus with fuU face mask or mouthpiece assembly - Requirements, testing, maricing. EN 403, Respiratory ptective devices for self-rescue - Filtering deuices with hood for sdfrescueJ+om fire - Require

31、ments, testing, marking. EN 404, Rmpimtory protective detrices for self-rescue - Filter selfrescuers - Requirements, testing, marking. Valved filtering half mash to ptect against gases or gases and partkks - Requirements, testing, maricing. filtering darices incorporating helmets or hoods - EN 405,

32、Respiratory protective davices - O BSI 1998 STD-BSI BS EN L3Li-ENGL 1998 Lb2LibbS Ob78b31 TOb 9 Page 4 EN 1341998 EN 1061, Respiratory protective devices for self-rescue - Self-contuined closed-circuit breathing apparatus - chemical oxygen (NaCZO3) escape appamtus - Requirements, testing, murking. E

33、N 1146, Respiratorg protective devices for self-rescue - Self-contained open-circuit compressed air breathing apparatus incorporating a hood (mpressed air escape apparatus with hood) - Requirements, Wting, marking. prEN 1827, Resp.ratory protective devices - Half masks without inhalation valves and

34、with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking. prEN 1835, Respzratorg protective devices - Light duty compressed air line breathing appamtus incorporating helmet or hood - Requirements, testing, murking. prEN 12419, Respirat

35、ory protective devices - Light duty compressed air line breathing apparatus ZncorpomtingfuU face masks, half maslcs or quarter masks - Requirements, testing, marking. O BSI 1998 STD-BSI BS EN L3Li-ENGL 1778 m 1b2LibbS Ob78b32 942 m Page 5 EN 1341998 3 Nomenclature Nomenclat we Benennungen 3.1 Facepi

36、eces Pices faciales Atemanschlsse 3.1.1 Full face mask EN 136 Masque complet EN 136 Vollmask EN 136 3 8 11- 1 Faceblank 2 Facepiece seal 3 Visor 4 Inner mask 5 Head harness 6 Equipment connector 7 Exhalationvaive 8 Checkvalve 9 inhalation valve 10 Speech diaphragm 11 Neck strap, (carrying strap) 12

37、(Spectacles) 13 Filter 14 Breathing hose 7 1 Jupe de masque 2 Joint facial 3 Oculaire 4 Masqueintrieur 5 Jeu de brides 6 Raccord lquipement 7 Soupape expiratoire 8 Soupape inspiratoire du masque 9 Soupape inspiratoire 10 Membrane phonique 11 Bretelle de transport 12 (Lunettes) 13 Filtxe 14 Tuyau res

38、piratoire intrieur 1 Maskenkrper 2 Maskendichbahmen 3 Sichscheibe 4 Innenmaske 5 Kopfbnderung 6 Gerteanschlustck 7 Ausatemventil 8 Steuerventil 9 Einatemventil 10 Sprechmembran 11 Rageband 12 (Maskenbriiie) 13 Filter 14 Atemschlauch 13 O BSI 1998 STD-BSI BS EN 134-ENGL 1998 Lb24bb7 Ob78633 887 Page

39、6 EN 1341998 3.1.2 HaCf mask or quarter Demi-masque ou quart de Halbmaske oder mask EN 140 masque EN 140 Vertelmaske EN 140 2. 3 10 1 Faceblank 2 Head harness 3 Exhalationvalve 4 inhalationvalve 6 Filter housing 6 Equipment connector 7 Particle filter 8 Gas filter 9 Preiter 10 Breathing hose 11 Nose

40、piece 1 Jupe de masque 2 Jeu de brides 3 Soupape expiratoire 4 Soupape inspiratoire 5 Botier de filtre 6 Raccord iqyipement 7 Filtre particules 8 Filtre anti-gaz 9 Prfiltre 10 Tuyau respiratoire 11 Pince nez 1 Maskenkrper 2 Kopfbnderung 3 Ausatemventil 4 Einatemventil 5 Filteraufnahme 6 Gerteanschiu

41、stck 7 Partikeiiter 8 Gasfilter 9 Vorfilter 10 Atemschlauch 11 Nasenbgel O BSI 1998 STD.BS1 BS EN 13q-ENGL 1998 m Lb24bb9 Ob9b3Li 715 m Page 7 EN 1341998 3.1.3 Mouthpiece assemblu Ensemble embout buccal Mundstckgarnitur EN 142 EN 142 EN 142 for filtering devices and open-circuit breathing apparatus

42、appareils circuit ouvert Behitergerate pour appareils itmnts et fr Filter-, Schiauch- und I 4 U t 2 for closed-circuit breathing pour appareils circuit ferm fr Regenerationsgerate app- 1 Mouthpiece body 2 Equipment connector 3 Mouthpiece 4 chinsupport 5 Head harness 6 Nose ciip 7 Exhalationvalve 8 i

43、nhalationvaive 1 Corps dembout buccal 2 Raccord lquipement 3 Embout buccal 4 Mentonnire 5 Jeu de brides 6 Pince narines 7 Soupape expiratoire 8 Soupape inspiratoire 1 Mundstuckkrper 2 Gerteanschlustck 3 Mundstck 4 Kinnsth 5 Kopfbndenuig 6 Nasenkemme 7 Ausatemveni 8 Einatemveni O BSI 1998 STD-BSI BS

44、EN 13Li-ENGL 1998 M Lb24bb7 Ob7b35 b5L = Page 8 EN 134:1998 3.1.4 Hood, helmet or blouse Cagoule, casque ou gilet Haube, Helm oder Bluse EN 270, EN 271, prEN 1835 EN 270, EN 271, prEN 1835 EN 270, EN 271, prEN 1835 1 2 3 U 1 Hood, helmet or blouse 2 Viior 3 Breahing hose 4 Exhalation valve 5 Compres

45、sed air supply tube 6 Continuous flow valve 7 coupling 8 Waist belt or carrying strap 1 Cagoule, casque ou gilet 2 Oculaire 3 Tuyau respiratoire 4 Soupape expiratoire 5 Tube dalimentation en air comprim 6 Robinet de rgiage 7 Accouplement 8 Ceinture ou bretelle de transport 1 Haube, Heim oder Bluse 2

46、 Sichtscheibe 3 Atemschlauch 4 Ausatemventil 5 Druckiuft-Zuftihrungsschlauch 6 Regelventil 7 Verbindungsstck 8 Leibgurt oder hagegurt O BSI 1998 STD-BSI BS EN L34-ENGL 1998 D Lb2qbb9 Ob98b3b 598 U Page 9 EN 134A998 3.2 Filtering devices Appareils filtrants Filtergergte Filtering devices consist eith

47、er of a facepiece and iter(s) or of a filtering half mask They may be unassisted, power assisted or powered. 3.2.1 Unassistedfiltering Appareils filtrants non Filtergerte ohne 3.2.1.1 Facepiece and filter devices assists Lrnversorg ung Pce faciale et fh Atkvn.amcMu$ und Filter 1 Faceblank 2 Head har

48、ness 3 Ekhaiationvaive 4 inhalation valve 5 Filter housing 6 Equipment connector 7 Particle lter (EN 143) 8 Gas fiiter (EN 141) 9 Prefilter 10 Breathing hose 11 Nosepiece 1 Jupe de masque 2 Jeu de brides 3 Soupape expiratoire 4 Soupape inspiratoire 5 Bower de iltre 6 Raccord iquipement 7 Filtre part

49、icules (EN 143) 8 Filtre anti-gaz (-N 141) 9 Prfiltre 10 Tuyau respiratoire 11 Pincenez U 1 Maskenkrper 2 Kopfindening 3 Ausatemventii 4 Einatemventil 5 Fiiteraufnahme 6 GerteanschluBstck 7 Partikelfilter (EN 143) 8 Gasfilter (EN 141) 9 Vorter 10 Atemschlauch 11 Nasenbgel O BSI 1998 Page 10 EN 134:1998 3.2.1.2 Filtering half mask EN 149, EN 405, PEN 182 7 Demi-masque filtrant EN 149, EN 405, PEN 182 7 Ftrerende HaEbmaslce EN 149, EN 405, WEN 1827 2- 2 4 2 6 1 Faceblank 2 Hea