EN 13443-1-2002 en Water conditioning equipment inside buildings - Mechanical filters - Part 1 Particle rating 80 m to 150 m - Requirements for performances safety and testing (Inc.pdf

1、BRITISH STANDARDBS EN 13443-1:2002Incorporating amendment no. 1Water conditioning equipment inside buildings Mechanical filters Part 1: Particle rating 80 4m to 150 4m Requirements for performances, safety and testingThe European Standard EN 13443-1:2002, incorporating amendment A1:2007, has the sta

2、tus of a British StandardICS 13.060.20; 91.140.60g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 13443-1:2002This British Standard was publish

3、ed under the authority of the Standards Policy and Strategy Committee on 3 February 2003 BSI 2007ISBN 978 0 580 60622 9National forewordThis British Standard is the UK implementation of EN 13443-1:2002, incorporating amendment A1:2007.The UK participation in its preparation was entrusted by Technica

4、l Committee B/504, Water supply, to Subcommittee B/504/13, Domestic water treatment.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for

5、its correct application. Compliance with a British Standard cannot confer immunity from legal obligations.Amendments issued since publicationAmd. No. Date Comments17458 30 November 2007 Implementation of CEN amendment A1:2007EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13443-1:2002+A1 Septem

6、ber 2007 ICS 13.060.20; 91.140.60 Supersedes EN 13443-1:2002 English Version Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 m to 150 m - Requirements for performances, safety and testing Appareils de traitement deau lintrieur des btiments - Filtres mc

7、aniques - Partie 1: Particules de dimension comprise entre 80 m et 150 m - Exigences de performances et de scurit, essais Anlagen zur Behandlung von Trinkwasser innerhalb von Gebuden - Mechanisch wirkende Filter - Teil 1: Filterfeinheit 80 m bis 150 m - Anforderungen an Ausfhrung, Sicherheit und Prf

8、ung This European Standard was approved by CEN on 23 October 2002 and includes Amendment 1 approved by CEN on 9 August 2007. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard wi

9、thout any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other langua

10、ge made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland

11、, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMI

12、TEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13443-1:2002+A1:2007: EEN 13443-1:2002+A1:2007 (E) 2 Contents page Foreword3 Introduction .4 1 Scope 5 2 Nor

13、mative references 5 3 Terms and definitions .5 4 Classification6 5 !Materials (chemical and hygienic behaviour of materials)“.7 6 General design requirements.7 7 Performances requirements.8 8 Performance tests8 9 Technical documents, labelling and marking.17 Annex A (informative) Bibliographical inf

14、ormation 19 Annex B (normative) !Installation, operation and maintenance 22 Bibliography 26 EN 13443-1:2002+A1:2007 (E) 3 Foreword This document (EN 13443-1:2007+A1:2007) has been prepared by Technical Committee CEN/TC 164 “Water supply”, the secretariat of which is held by AFNOR. This European Stan

15、dard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2008, and conflicting national standards shall be withdrawn at the latest by March 2008. This document supersedes EN 13443-1:2002. This document includes Amendm

16、ent 1, approved by CEN on 2007-08-09. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard:

17、 Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 1

18、3443-1:2002+A1:2007 (E) 4 Introduction In respect of potential adverse effects on the quality of water intended for human consumption, caused by the product covered by this standard: 1) this standard provides no information as to whether the product may be used without restriction in any of the Memb

19、er States of the EU or EFTA; 2) it should be noted that, while awaiting the adoption of verifiable European criteria, existing national regulations concerning the use and/or the characteristics of this product remain in force. EN 13443-1:2002+A1:2007 (E) 5 1 Scope Part 1 of this European Standard ap

20、plies to mechanical filters for drinking water installations inside buildings, of nominal size from DN 15 to DN 100, minimum nominal pressure PN10, particle rating of 80 m to 150 m, and !maximum“ design temperature of 30 C. It specifies requirements relating to the construction and mode of operation

21、 of filters and describes relevant methods of testing. It only concerns units which are permanently connected to the mains supply at the point of entry into the building. Part 2 of this European Standard (!EN 13443-2:2005+A1“) is a separate document and deals with filters with a particle size limit

22、less than 80 m. 2 Normative references !The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.“ EN 1333,

23、 Flanges and their joints - Pipework components - Definition and selection of PN EN 1567, Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests EN 1717, Protection against pollution of potable water in water installations and general

24、 requirements of devices to prevent pollution by backflow !EN 15161, Water conditioning equipment inside buildings Installation, operation, maintenance and repair“ EN ISO 3822-3, Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3:

25、 Mounting and operating conditions for in-line valves and appliances (ISO 3822-3:1997) EN ISO 6509, Corrosion of metals and alloys - Determination of dezincification resistance of brass (ISO 6509:1981) !deleted text“ ! ISO 2591-1, Test sieving Part 1: Methods using test sieves of woven wire cloth an

26、d perforated metal plate ISO 9276-1, Representation of results of particle size analysis Part 1: Graphical representation ISO 13320-1, Particle size analysis Laser diffraction methods Part 1: General principles“ 3 Terms and definitions For the purposes of this European Standard, the following terms

27、and definitions apply. 3.1 !drinking water“ water intended for human consumption as defined in Directive 98/83/EC !(see Annex A)“ 3.2 !mechanical filter“ !appliance“ designed to remove undissolved substances from water, down to a specified particle size 3.3 filter element part of a filter designed t

28、o ensure the retention of particles EN 13443-1:2002+A1:2007 (E) 6 3.4 grade of filtration ability of a filter to retain particles and suspended matter of a given size range irrespective of the nature of the material used in the filter element, defined by the maximum and minimum filter particle ratin

29、g 3.5 minimum particle rating number determining the particle size, in m, of a material 90 % by mass of which is able to pass through the filter under test conditions 3.6 maximum particle rating number determining the particle size, in m, of a material 10 % by mass of which is able to pass through t

30、he filter under test conditions 3.7 filter surface velocity flow rate divided by the filter surface area, expressed in m3/(h cm2) 3.8 nominal flow rate clean filter flow rate at which either the pressure drop does not exceed a value of 50 kPa (0,5 bar), or the filter surface velocity does not exceed

31、 the maximum specified value, whichever is lower 4 Classification 4.1 Principle Mechanical filters shall be designated by: nominal size DN; end connections; filter type; nominal pressure PN. The designation shall be clearly identified on the manufacturers rating plate or in the instruction manual. E

32、xamples are given in !Annex A“. 4.2 Nominal size (DN) The nominal size DN shall correspond to the flow rates in Table 2. The inlet connection of the filter may be DN or one size larger or one size smaller than the nominal size DN. In the case of flange connections the nominal size DN is determined b

33、y the DN of the inlet connection. 4.3 !End connections“ Examples of end connections are shown in !Annex A“. Combinations of two kinds of connections are possible. 4.4 !Filter type“ Filters conforming to this standard shall be presented as one of the following types: filters requiring single use filt

34、er elements; EN 13443-1:2002+A1:2007 (E) 7 backwashing filters filter elements cleaned by backwashing ( without any dismantling). 4.5 !Nominal pressure (PN)“ The nominal pressure PN shall correspond to EN 1333. 5 !Materials (chemical and hygienic behaviour of materials)“ The selection of materials s

35、hall be the responsibility of the manufacturer, provided that the complete filter satisfies the requirements of EN 1567. NOTE The materials and coatings used should not contaminate or change the drinking water, when in normal or accidental contact up to the maximum designed temperature. The requirem

36、ents , with regard to the effects of materials on drinking water quality, are specified in national regulations. The manufacturer shall state in his technical literature what materials and coatings are used. The materials, in particular copper alloys, shall conform to relevant national standards or

37、recommendations. These references shall be stated. Copper-zinc alloys containing more than 10 % zinc are subject to dezincification when submitted to water capable of dezincification. In countries where the use of products made of dezincification resistant material is required, the product have to g

38、uarantee a dezincification depth less than 200 m in any direction. They have to be tested and marked in accordance with EN ISO 6509 and have to be marked in compliance with the indications under clause 9 of the present standard. 6 General design requirements 6.1 Backwashable filters Backwashable fil

39、ters shall be able to be cleaned without the aid of tools. No substances shall be allowed to penetrate into the drinking water supply as a result of the cleaning operation. After completion of backwashing, the original grade of filtration and pressure drop shall be recovered. Backwashable filters sh

40、all be provided with a backwash water outlet, conforming to EN 1717. It shall be possible to clean the filter mounted in any of the positions specified by the manufacturer with no interruption of filtered water supply during backwashing. 6.2 Single-use filters Single use filters shall be designed in

41、 such a way that the filter elements can be replaced without any risk of contamination of the drinking water. It shall be possible to replace the filter mounted in any of the positions specified by the manufacturer. Any tools used in this process shall not come into contact with drinking water and s

42、hall be provided by the manufacturer. If specific tools are necessary they shall be supplied by the manufacturer. Replacement filter elements shall be single packaged to prevent contamination from outside. 6.3 Thermal stability Filters shall be designed to withstand room and water temperatures of at

43、 least 30C. EN 13443-1:2002+A1:2007 (E) 8 7 Performances requirements 7.1 !Bending strength of the body“ When subjected to a bending moment in accordance with 8.2.1.2, there shall be no permanent deformation, fissures or ruptures. 7.2 !Pressure strength of the filter housing“ When subjected to a hyd

44、raulic test as defined in 8.2.2, there shall be no visible leakage or permanent deformation. 7.3 !Pressure strength of the filter element“ After being subjected to a differential pressure as described in 8.2.3.2, there shall be no visible deformation of the filter cartridge. 7.4 !Dynamic pressure te

45、st“ While subject to cyclic pressure test as described in 8.2.4 the filter hosing shall show no visible signs of leakage or permanent deformation. 7.5 !Pressure drop“ When subjected to the nominal flow rate as described in 8.3.1.2, the filter, with a clean element, shall not develop a pressure drop

46、higher than 50 kPa. 7.6 !Filter surface velocity“ The filter surface velocity shall not exceed 0,15 m3/(h cm2) for backwashable filters and 0,025 m3/(h cm2) for replaceable cartridge filters at the nominal flow rate. 7.7 !Filter rating“ When tested in accordance with 8.4.2, the maximum filter rating

47、 shall be between 100 !m“ and 150 !m“ and the minimum filter rating shall be between 80 !m“ and 120 !m“. 8 Performance tests 8.1 !Test conditions“ Tests shall be carried out with the filter in the horizontal position, except for special models. Unless otherwise specified tolerances shall be 5%. Unle

48、ss otherwise stated tests shall be carried out at room temperature with water between 10 C and 30 C. If the designed water temperature is higher than 30 C, the designed temperature shall be used for the test. 8.2 !Mechanical performance“ 8.2.1 Bending strength of the body 8.2.1.1 Principle The mecha

49、nical bending strength of the body is tested by a bending moment test, in which a force is applied for a predetermined period. EN 13443-1:2002+A1:2007 (E) 9 8.2.1.2 !Test procedure“ Fix the mechanical filter by one connection to a test apparatus as shown in Figure 1. Connect the other side to a metal tube and apply the appropriate force F in order to obtain the bending moment as given in Table 1. Apply the bending moment for ! s.10030+“ Table 1 Nominal size vs. bending moment Nominal size DN 15 20 25 32 40 50 65 80 1