EN 13471-2001 en Thermal Insulating Products for Building Equipment and Industrial Installations - Determination of the Coefficient of Thermal Expansion《建筑设备和工业设施用隔热制品 热膨胀系数的测定》.pdf

1、BRITISH STANDARD Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion The European Standard EN 13411:ZOOl has the status of a British Standard ICs 91.120.10; 91.100.60 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMl

2、TTED BY COPYRIGHT LAW BS EN 13471:2001 BS EN 13471:ZOOl National foreword This British Standard is the official English language version of EN 13471:2001. This British Standard, together with BS EN 13467:2001, BS EN 13468:2001, BS EN 13469:2001, BS EN 13470:ZOOI and BS EN 13472:2001, partially super

3、sedes BS 2972:1989. The UK participation in its preparation was entrusted by Technical Committee RHE/9, Thermal insulating materials, to Subcommittee RHE/9/4, Nomenclature and specifications, which has the responsibility to: - - aid enquirers to understand the text; present to the responsible Europe

4、an committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. - A list of organizations represented on this subcommittee can be obtained on request to its secretary

5、. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Ele

6、ctronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. This British Standard,

7、 having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on O9 November 2001 Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pa

8、ges 2 to 10, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Q BSI O9 November 2001 Amd. No. irate IComments ISBN O 580 38622 8 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM

9、EN 13471 September 2001 ICs 91.100.60 English version Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion Produits isolants thermiques pour Iequipement du btiment et les installations industrielles - Dtermination du

10、coefficient de dilatation thermique Wrmedmmstoffe fr die Haustechnik und fr betriebstechnische Anlagen - Bestimmung des Wrmeausdehnungskoeffizienten This European Standard was approved by CEN on 18 August 2001. CEN members are bound to comply with the CENICENELEC Internal Regulations which stipulate

11、 the conditions for giving this European Standard the status of a national standard without any alteration. Upto-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in

12、 three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of

13、Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland. Italy. Luxembourg, Netherlands, Noway. Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION EUROPISCHES KOMITEE FOR NORMUNG COMITE EUROPEEN DE NORMALISATION Manag

14、ement Centre: rue de Stassart, 36 8-1050 Brussels O 2001 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13471 :2001 E EN 13471:2001 (E) Contents Page Foreword . 3 Scope . 4 Normative references . 4 Terms and definitions 4 Principl

15、e . 5 Apparatus 5 Test specimens . 7 Procedure 8 Calculation and expression of results 9 Accuracy of measurement . 9 10 Test rep0 rt . 9 2 EN 13471:2001 (E) Foreword This European Standard has been prepared by Technical Committee CEN/TC 88 Thermal insulating materials and products”, the secretariat

16、of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2002, and conflicting national standards shall be withdrawn at the latest by March 2002. This European Standard is on

17、e of a series of standards which specify test methods for determining dimensions and properties of thermal insulating materials and products. It supports a series of product standards for thermal insulating materials and products which derive from the Council Directive of 21 December 1988 on the app

18、roximation of laws, regulations and administrative provisions of the Member States relating to construction products (Directive 8911 OG/EEC) through the consideration of the essential requirements. This European Standard has been prepared for products used to insulate building equipment and industri

19、al installations, but it may also be applied to products used in other areas. No existing European Standard is superseded According to the CENICENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium

20、, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. 3 EN 13471:2001 (E) i Scope This European Standard specifies the equipment and procedures for determining the coefficien

21、t of linear thermal expansion. The standard is applicable to thermal insulating products within the temperature range - 196 OC to 850 OC, subject to the possible temperature limitation of the test specimens. It shall not be used for products which during the test experience dimensional changes due t

22、o the loss of hydration water or which undergo other phase changes. NOTE Because of its small dimensions the test specimen should be carefully selected to be representative of the product being tested. 2 Normative references This European Standard incorporates, by dated or undated reference, provisi

23、ons from other publica-tions. These normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it b

24、y amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 12085, Thermal insulating products for building applications - Determination of linear dimensions of test specimens. 3 Terms and definitions For the purpose of this Eu

25、ropean Standard, the following terms and definitions apply: 3.1 linear thermal expancion reversible changes in the length of a product resulting from a change in temperature 3.2 mean coefficient of linear thermal expansion a, between different temperatures reversible change in length divided by the

26、length at the reference temperature and the temperature difference between the test tem peratures 3.3 coefficient of thermal expansion 4 at the temperature T limit value of % as the higher temperature approaches the lower temperature (see Figure 1) NOTE The definition of 12 is the length of the test

27、 specimen, in millimetres, at the temperature T2. in degree Celcius. If required, determine the coefficient of thermal expansion at the temperature T, a, as the tangent to the above curve. 9 Accuracy of measurement NOTE It has not been possible to include a statement on the accuracy of the method in

28、 this edition of the standard, but it is intended to include such a statement when the standard is next revised. 10 Testreport The test report shall include the following information: a) reference to this European Standard; b) product identification 1) product name, factory, manufacturer, or supplie

29、r; 2) production code num ber; 3) type of product; 4) packaging; 5) the form in which the product arrived at the laboratory; 6) other information as appropriate, e.g. nominal dimensions; c) test procedure 1) pre-test history and sampling, e.g. who sampled and where; 2) waiting time before conditioni

30、ng; 3) conditioning; 4) annealing, drying conditions; 9 EN 13471 :2001 (E) 5) presence of facings, the mass of the facing and the method of removal, if necessary; 6) presence of surface skins and the method of removal, if necessary; 7) if any deviation from clauses 6 and 7; 8) date of testing; 9) ge

31、neral information relating to the test; IO) events which may have affected the results; NOTE Information about the apparatus and identity of the technician should be available in the laboratory but it need not be recorded in the report. d) results all individual values of the coefficient of thermal

32、expansion in each tem perature interval or at each temperature, mean value in the same temperature intervals or at the same temperatures. 10 BS EN 13471:2001 BSI 389 Chiswick High Road London w4 4AL BSH - British Standards Institution BSI is the independent national body responsible for preparing Br

33、itish Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or rditions. Ct i

34、s the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front

35、 cover. lel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be address

36、ed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. Standards are also available from the BSI website at htto:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless ot

37、herwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Expoiters Service. Various BSI electronic information services are also available which give details on all its product

38、s and services. Contact the Information Centre. Tel: O20 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administ

39、ration. Tel: 020 8996 7002. Fax: 020 8996 7001. Further information about BSI is available on the BSI website at -. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted unde

40、r the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means - electronic, photocopying, recording or otherwise - without prior written permission from BSI. This does not preclude the free use, in the course of im

41、plementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: O20 8996 7070.