EN 13480-8-2012 en Metallic industrial piping - Part 8 Additional requirements for aluminium and aluminium alloy piping (Incorporates Amendment A2 2015)《金属工业管道 第8部分 铝及铝合金管道额外要求》.pdf

1、BS EN 13480-8:2012Metallic industrial pipingPart 8: Additional requirements foraluminium and aluminium alloy pipingBS EN 13480-8:2012Incorporating corrigendum October 2014BS EN 13480-8:2012+A1:2014BS EN 13480-8:2012+A2:2015Incorporating corrigenda October 2014 and March 2017BSI Standards Publication

2、WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 13480-8:2012+A2:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13480-8:2012+A2:2015. It supersedes BS EN 13480-8:2012+A1:2014which is withdrawn.The start and finish of text introduced or altered

3、 by amendment isindicated in the text by tags. Tags indicating changes to CEN text carrythe number of the CEN amendment. For example, text altered by CENamendment A2 is indicated by .Changes introduced in the text by CEN amendment A1 are indicated inthe text by sidelines.The UK participation in its

4、preparation was entrusted to TechnicalCommittee PVE/10, Piping systems.A list of organizations represented on this committee can be obtainedon request to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct applic

5、ation. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 97512 7ICS 23.040.01Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committ

6、ee on 31 December 2012.Amendments/corrigenda issued since publicationDate Text affected31 July 2014 Implementation of CEN amendment A1:201431 October 2014 Implementation of CEN Correction Notice 27 August 2014: See details in Annex Y30 November 2015 Implementation of CEN amendment A2:201531 March 20

7、17 Implementation of CEN Correction Notice 27 July 2016: See details in Annex YEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13480-8 June 2012 ICS 23.040.01 Supersedes EN 13480-8:2007English Version Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy

8、 piping Tuyauteries industrielles mtalliques - Partie 8: Exigences complmentaires relatives aux tuyauteries en aluminium et alliages daluminium Metallische industrielle Rohrleitungen - Teil 8: Zusatzanforderungen an Rohrleitungen aus Aluminium und Aluminumlegierungen This European Standard was appro

9、ved by CEN on 8 May 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national stan

10、dards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and n

11、otified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithu

12、ania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussel

13、s 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13480-8:2012: EEN 13480-8:2012+A1May 2014Supersedes EN 13480-8:2012EN 13480-8:2012+A2September 2015Supersedes EN 13480-8:2012+A1:2014BS EN 13480-8:2012+A2:2015EN 13480-8:2012+A

14、2:2015 (E) Issue 4 (2016-07) 2 Contents Page Foreword 5 1 Scope 7 2 Normative references 7 3 Terms, definitions, symbols and units 9 4 General requirements 9 5 Materials .9 5.1 General 9 5.2 Material grouping system .9 5.3 Elongation after fracture .10 5.4 Chemical composition 11 5.5 Lamellar tearin

15、g .11 5.6 Design temperature and properties .11 5.7 Prevention of brittle fracture 11 5.8 Specific requirements for fasteners made of aluminium and aluminium alloys 12 5.9 Lined piping 12 5.10 Clad products .12 5.11 Technical delivery conditions for welding consumables 12 6 Design .12 6.1 General 12

16、 6.2 Time-independent nominal design stress .12 6.3 Straight pipes .13 6.4 Pipe bends and elbows .13 6.5 Mitre bends .13 6.6 Socket welds 14 6.7 Designing with transition joints .15 6.7.1 Design considerations 15 6.7.2 Location of transition joints .15 6.7.3 Requirements for transition joints .15 7

17、Fabrication and installation 15 7.1 General 15 7.2 Material grouping .16 7.3 Tolerances 16 7.3.1 Welded pipes and connection dimensions of pipe fittings .16 7.3.2 Welded piping construction .16 7.4 Cutting and bevelling 16 7.5 Bending and other forming .17 7.5.1 General 17 7.5.2 Definition of cold-

18、and hot forming 17 7.5.3 Heat treatment after cold forming 17 7.5.4 Heat treatment after hot forming 18 7.6 Welding .19 7.6.1 Welding personnel .19 7.6.2 Welding processes 19 7.6.3 Weld joint preparation .19 7.6.4 Preheating 20 7.6.5 Backing rings and backing strips 21 BS EN 13480-8:2012+A2:2015EN 1

19、3480-8:2012+A2:2015 (E) Issue 4 (2016-07) 3 7.6.6 Post-weld heat treatment (PWHT) 21 8 Inspection and testing 21 8.1 General . 21 8.2 Formed pressure retaining parts . 21 8.2.1 General . 21 8.2.2 Testing of formed parts 22 8.2.3 Destructive testing of formed and heat treated parts 22 8.3 Welding . 2

20、3 8.4 Visual and non-destructive testing of welds 23 8.4.1 Application of NDT 23 8.4.2 Circumferential, branch, socket and seal welds 23 8.4.3 Longitudinal welds and spiral welded tubes/pipes . 24 8.5 VT and NDT Methods 24 8.6 Production test plates for welded pipes . 25 9 Final assessment and docum

21、entation 26 9.1 General . 26 9.2 Pneumatic pressure test . 26 9.3 Documentation for components 27 Annex A (informative) Dimensional tolerances 29 Annex B (normative) Transition joints 31 Annex C (normative) Nominal design stress values . 31 Annex Y (informative) History of EN 13480-8 . 42 Annex ZA (

22、informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2014/68/EU aimed to be covered 43 Bibliography 44 BS EN 13480-8:2012+A2:2015EN 13480-8:2012+A2:2015 (E) Issue 4 (2016-07) 4 Figures Figure 6.5-1 Mitre bend 14 Figure 7.6.3.1 Socket welds .20 Figur

23、e A.1 Dimensional details of spools .30 Tables Table 5.2-1 Grouping system based on CEN ISO/TR 15608:2005 and EN AW numbers according to EN 573-3:2009 .10 Table 6.2-1 Design stresses for aluminium and aluminium alloy material .12 Table 6.2-2 Allowable design strength values for 6 000 series aluminiu

24、m alloys in the welded condition (see 5.6) .13 Table 6.5-1 Special symbols for subclause 6.5 .14 Table 7.3-1 Tolerances for welded pipes .16 Table 7.5-1 Heat treatment of flat products after cold forming 18 Table 7.5-3 Heat treatment after hot forming .19 Table 8.2-1 Destructive testing of formed an

25、d heat treated parts 23 Table 8.4-1 Extent of testing for circumferential, branch, socket and seal welds 24 Table 8.4-2 Extent of VT and NDT for longitudinal welds and spiral welded tubes/pipes .24 Table 8.5-1 Techniques, methods, acceptance criteria .25 Table 8.6-1 Production test plates for welded

26、 pipes according to 8.6 a) .26 Table 8.6-2 Required tests and acceptance criteria for production test plates 26 Table 9.2-1 Extent of NDT in case of pneumatic pressure test according to 9.2b) .27 Table A.1 Tolerances .29 Table B.1 Testing of transition joints (T.J.) 34 Table C.1 Extruded rod/bar, tu

27、be and profile .36 Table C.2 Cold drawn rod/bar and tube .37 Table C.3 Forgings .38 Table C.4 Plate .39 Table ZA.1 Correspondence between this European Standard and Directive 2014/68/EU on Pressure Equipment 43 BS EN 13480-8:2012+A2:2015EN 13480-8:2012+A2:2015 (E) Issue 4 (2016-07) 5 Foreword This d

28、ocument (EN 13480-8:2012) has been prepared by Technical Committee CEN/TC 267 “Industrial piping and pipelines”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the la

29、test by December 2012, and conflicting national standards shall be withdrawn at the latest by December 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or a

30、ll such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part o

31、f this document. This European Standard EN 13480 for metallic industrial piping consists of eight interdependent and not dissociable Parts which are: Part 1: General; Part 2: Materials; Part 3: Design and calculation; Part 4: Fabrication and installation; Part 5: Inspection and testing; Part 6: Addi

32、tional requirements for buried piping; CEN/TR 13480-7, Guidance on the use of conformity assessment procedures; Part 8: Additional requirements for aluminium and aluminium alloy piping. Although these Parts may be obtained separately, it should be recognised that the Parts are inter-dependant. As su

33、ch the manufacture of metallic industrial piping requires the application of all the relevant Parts in order for the requirements of the Standard to be satisfactorily fulfilled. This European Standard will be maintained by a Maintenance MHD working group whose scope of working is limited to correcti

34、ons and interpretations related to EN 13480. The contact to submit queries can be found at http:/www.unm.fr (en13480unm.fr). A form for submitting questions can be downloaded from the link to the MHD website. After subject experts have agreed an answer, the answer will be communicated to the questio

35、ner. Corrected pages will be given specific issue number and issued by CEN according to CEN Rules. Interpretation sheets will be posted on the website of the MHD. BS EN 13480-8:2012+A2:2015EN 13480-8:2012+A2:2015 (E) Issue 4 (2016-07) 6 This document supersedes EN 13480-8:2007+A1:2011. This new edit

36、ion incorporates the Amendments/the corrigenda which have been approved previously by CEN members, and the corrected pages up to Issue 17 without any further technical change. Annex Y provides details of significant technical changes between this European Standard and the previous edition. Amendment

37、s to this new edition may be issued from time to time and then used immediately as alternatives to rules contained herein. It is intended to deliver a new Issue of EN 13480:2012 each year, consolidating these Amendments and including other identified corrections. Issue 4 (2016-07) consolidates Amend

38、ment EN 13480-8:2012/A2:2015; it includes the corrected pages listed in Annex Y. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republ

39、ic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN

40、13480-8:2012+A2:2015EN 13480-8:2012+A2:2015 (E) Issue 4 (2016-07) 7 1 Scope This Part of EN 13480 specifies requirements for industrial piping systems made of aluminium and aluminium alloys in addition to the general requirements for industrial piping according to the series of standards EN 13480 an

41、d CEN/TR 13480-7. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (i

42、ncluding any amendments) applies. EN 485-2:2013, Aluminium and aluminium alloys Sheet, strip and plate Part 2: Mechanical properties EN 485-3, Aluminium and aluminium alloys Sheet, strip and plate Part 3: Tolerances on dimensions and form for hot-rolled products EN 485-4, Aluminium and aluminium all

43、oys Sheet, strip and plate Part 4: Tolerances on shape and dimensions for cold-rolled products EN 573-3:2013, Aluminium and aluminium alloys Chemical composition and form of wrought products Part 3: Chemical composition and form of products EN 586-2:1994, Aluminium and aluminium alloys Forgings Part

44、 2: Mechanical properties and additional property requirements EN 754 (all parts), Aluminium and aluminium alloys Cold drawn rod/bar and tube EN 755 (all parts), Aluminium and aluminium alloys Extruded rod/bar, tube and profiles EN 764-3, Pressure equipment Part 3: Definition of parties involved EN

45、1779:1999, Non-destructive testing Leak testing Criteria for method and technique selection EN 10204:2004, Metallic products Types of inspection documents EN 12392:2000, Aluminium and aluminium alloys Wrought products Special requirements for products intended for the production of pressure equipmen

46、t EN 13445-4:2014, Unfired pressure vessels Part 4: Fabrication EN 13480-1:2012, Metallic industrial piping Part 1: General EN 13480-2:2012, Metallic industrial piping Part 2: Materials EN 13480-3:2012, Metallic industrial piping Part 3: Design and calculation EN 13480-4:2012, Metallic industrial pi

47、ping Part 4: Fabrication and installation EN 13480-5:2012, Metallic industrial piping Part 5: Inspection and testing EN ISO 148-1:2010, Metallic materials Charpy pendulum impact test Part 1: Test method (ISO 148-1:2009) EN ISO 3452-1:2013, Non-destructive testing Penetrant testing Part 1: General pr

48、inciples (ISO 3452-1:2013) EN ISO 3834-2:2005, Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements (ISO 3834-2:2005) BS EN 13480-8:2012+A2:2015EN 13480-8:2012+A2:2015 (E)Issue 4 (2016-07) 8 EN ISO 3834-3:2005, Quality requirements for fusion weldi

49、ng of metallic materials Part 3: Standard quality requirements (ISO 3834-3:2005) EN ISO 4063:2010, Welding and allied processes Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01) EN ISO 4136:2012, Destructive tests on welds in metallic materials Transverse tensile test (ISO 4136:2012) EN ISO 5173:2010 + A1:2011, Destructive tests on welds in metallic materials Bend tests (ISO 5173:2009 + Amd 1:2011) EN I