EN 13491-2018 en Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and associated underground structures.pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Geosynthetic barriers Characteristics required for use in the construction of tunnels and associated underground structuresBS EN 13491:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13491 March 2018 ICS 59.080

2、70; 91.100.50 Supersedes EN 13491:2013English Version Geosynthetic barriers - Characteristics required for use in the construction of tunnels and associated underground structures Gomembranes et gosynthtiques bentonitiques - Caractristiques requises pour lutilisation dans la construction de tunnels

3、 et des structures souterraines associes Geosynthetische Dichtungsbahnen - Eigenschaften, die fr die Anwendung beim Bau von Tunneln und damit verbundenen Tiefbauwerken erforderlich sind This European Standard was approved by CEN on 23 October 2017. CEN members are bound to comply with the CEN/CENELE

4、C Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or

5、to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the offic

6、ial versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,

7、Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CEN All

8、 rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13491:2018 ENational forewordThis British Standard is the UK implementation of EN 13491:2018. It supersedes BS EN 13491:2013, which is withdrawn.The UK participation in its preparation was e

9、ntrusted to Technical Committee B/553, Geosynthetics.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The Briti

10、sh Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 93477 3ICS 91.100.50; 59.080.70Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee o

11、n 31 March 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 13491:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13491 March 2018 ICS 59.080.70; 91.100.50 Supersedes EN 13491:2013English Version Geosynthetic barriers - Characteristics required for

12、use in the construction of tunnels and associated underground structures Gomembranes et gosynthtiques bentonitiques - Caractristiques requises pour lutilisation dans la construction de tunnels et des structures souterraines associes Geosynthetische Dichtungsbahnen - Eigenschaften, die fr die Anwendu

13、ng beim Bau von Tunneln und damit verbundenen Tiefbauwerken erforderlich sind This European Standard was approved by CEN on 23 October 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a nati

14、onal standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A ver

15、sion in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus,

16、Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United

17、 Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. E

18、N 13491:2018 EBS EN 13491:2018EN 13491:2018 (E) 2 Contents Page European foreword . 3 Introduction 4 1 Scope 5 2 Normative references 5 3 Terms, definitions and abbreviations . 8 3.1 Terms and definitions . 8 3.2 Abbreviations . 9 4 Characteristics and corresponding methods of test 10 4.1 General .

19、10 4.2 Types of application 10 4.3 Relevant characteristics 14 4.4 Characteristics relevant to specific conditions of use 20 4.5 Release of dangerous substances . 21 5 Assessment and verification of constancy of performance (AVCP) . 21 5.1 General . 21 5.2 Type testing 21 5.3 Factory production cont

20、rol (FPC) 25 Annex A (normative) Durability of geosynthetic barriers . 33 A.1 General . 33 A.2 Weathering . 34 A.3 Products used with a service life up to 5 years . 36 A.4 Other applications and service life of 25 and 50 years 36 A.5 Durability tests on GBR-P 42 A.6 Evaluation tests on GBR-P and GBR

21、C . 50 A.7 Durability tests on GBR-B 51 A.8 Evaluation tests on GBR-B . 55 Annex ZA (informative) Relationship of this European Standard with Regulation (EU) No. 305/2011 . 57 ZA.1 Scope and relevant characteristics 57 ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) 58

22、 ZA.3 Assignment of AVCP tasks . 59 Bibliography . 61 BS EN 13491:2018EN 13491:2018 (E) 3 European foreword This document (EN 13491:2018) has been prepared by Technical Committee CEN/TC 189 “Geosynthetics”, the secretariat of which is held by NBN. This document supersedes EN 13491:2013. This Europea

23、n Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2018, and conflicting national standards shall be withdrawn at the latest by December 2019. Attention is drawn to the possibility that some of the ele

24、ments of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. For relationshi

25、p with Regulation (EU) No. 305/2011, see informative Annex ZA, which is an integral part of this document. The main changes with respect to the previous edition are listed below: The list of normative references has been updated; In 3.1 three terms have been added; In 3.2 list of abbreviations has b

26、een updated; In 4.3, Table 1, has been modified to comply with the modified mandate M/386 (inclusion of elongation in separation and filtration functions) and has been technically revised, all H-coded characteristics have been replaced by “A”; Figures and keys have been revised; Clause 5 “Evaluation

27、 of conformity” has been superseded by new Clause 5 “Assessment and verification of constancy of performance (AVCP)”; Annex A “Factory production control Factory production control scheme” has been deleted; Former Annex B “Durability” becomes Annex A, which has been totally revised; Annex ZA has bee

28、n updated according to new template to fulfil requirements of CPR, also examples for CE-marking have been deleted. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulga

29、ria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerl

30、and, Turkey and the United Kingdom. BS EN 13491:2018EN 13491:2018 (E) 4 Introduction This document allows manufacturers to describe geosynthetic barriers on the basis of declared values for characteristics relevant to the intended use and if tested to the specified method. It also includes procedure

31、s for assessment and verification of constancy of performance (AVCP) including the factory production control. This document can also be used by designers, end-users and other interested parties as a tool to define relevant and appropriate characteristics for specifications. Tests for some non-manda

32、ted characteristics are still under study and will be included when the standard is revised. The term “product” used in this document refers to a geosynthetic barrier, including polymeric geosynthetic barriers, clay geosynthetic barriers and bituminous geosynthetic barriers. This document is part of

33、 a group of standards, addressing the requirements for geosynthetic barriers when used in a specific application. Particular application cases can contain requirements about additional properties and preferably standardized test methods, if they are technically relevant and not conflicting with Euro

34、pean Standards. The design life of the product should be determined, since its function can be temporary, as construction expediency, or permanent, for the lifetime of the structure. BS EN 13491:2018EN 13491:2018 (E) 5 1 Scope This document specifies the characteristics of geosynthetic barriers, inc

35、luding polymeric geosynthetic barriers, clay geosynthetic barriers and bituminous geosynthetic barriers, when used as fluid barriers and separation layer in the construction of tunnels and associated underground structures, and the appropriate test methods to determine these characteristics. The int

36、ended use of these products is to control the leakage of fluid through the construction. This document is not applicable to geotextiles or geotextile-related products as defined in EN ISO 10318-1. This document provides for the assessment and verification of constancy of performance (AVCP) of the pr

37、oduct to this European Standard including factory production control procedures. This document defines characteristics to be considered with regard to the presentation of performance. This document does not cover applications where the geosynthetic barrier is to be in contact with water that has bee

38、n treated for human consumption. NOTE Where potable water is or can be in direct contact with the product, other relevant standards, requirements and/or regulations can be considered for the design. 2 Normative references The following documents, in whole or in part, are normatively referenced in th

39、is document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1109:2013, Flexible sheets for waterproofing - Bitumen sheets for roof waterproofi

40、ng - Determination of flexibility at low temperature EN 1296:2000, Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roofing - Method of artificial ageing by long term exposure to elevated temperature EN 1844:2013, Flexible sheets for waterproofing - Determination of resista

41、nce to ozone - Plastic and rubber sheets for roof waterproofing EN 1849-1:1999, Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing EN 1849-2:2009, Flexible sheets for waterproofing - Determination of thickness and mas

42、s per unit area - Part 2: Plastic and rubber sheets EN 12224:2000, Geotextiles and geotextile-related products - Determination of the resistance to weathering EN 12225:2000, Geotextiles and geotextile-related products - Method for determining the microbiological resistance by a soil burial test EN 1

43、2226:2012, Geosynthetics - General tests for evaluation following durability testing EN 12310-1:1999, Flexible sheets for waterproofing - Part 1: Bitumen sheets for waterproofing - Determination of resistance to tearing (nail shank) EN 12311-1:1999, Flexible sheets for waterproofing - Part 1: Bitume

44、n sheets for roof waterproofing - Determination of tensile properties BS EN 13491:2018EN 13491:2018 (E) 6 EN 12311-2:2013, Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing EN 13249:2016, Geotextiles and geotextile-rela

45、ted products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion) EN 13250:2016, Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways EN 13251:2016, Geotextiles

46、and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures EN 13252:2016, Geotextiles and geotextile-related products - Characteristics required for use in drainage systems EN 13253:2016, Geotextiles and geotextile-related products - Charac

47、teristics required for use in erosion control works (coastal protection, bank revetments) EN 13254:2016, Geotextiles and geotextile-related products - Characteristics required for the use in the construction of reservoirs and dams EN 13255:2016, Geotextiles and geotextile-related products - Characte

48、ristics required for use in the construction of canals EN 13256:2016, Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures EN 13257:2016, Geotextiles and geotextile-related products - Characteristics required for use

49、 in solid waste disposals EN 13265:2016, Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects EN 14150:2006, Geosynthetic barriers - Determination of permeability to liquids EN 14151:2010, Geosynthetics - Determination of burst strength EN 14196:2016, Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers EN 14414:2015, Geosynthetics - Screening test method for determining chemical resistance for landfill applications EN 14415:2004, Ge