EN 13501-6-2014 en Fire classification of construction products and building elements - Part 6 Classification using data from reaction to fire tests on electric cables《建筑产品的及建筑元件的火.pdf

1、BSI Standards PublicationBS EN 13501-6:2014Fire classification ofconstruction products andbuilding elementsPart 6: Classification using data fromreaction to fire tests on electric cablesBS EN 13501-6:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13501-6:2

2、014.The UK participation in its preparation was entrusted to TechnicalCommittee FSH/21/-/8, Reaction to fire tests - Classification andapplication of test results.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to inc

3、lude all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 76561 2ICS 13.220.50; 29.060.20Compliance with a British Standard cannot confer immunity fromlegal obligation

4、s.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 March 2014.Amendments issued since publicationDate Text affectedBS EN 13501-6:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13501-6 March 2014 ICS 13.220.50; 29.060.20 English Ver

5、sion Fire classification of construction products and building elements - Part 6: Classification using data from reaction to fire tests on electric cables Classement au feu des produits et lments de construction- Partie 6: Classement partir des donnes dessais de raction au feu sur cbles lectriques K

6、lassifizierung von Bauprodukten und Bauarten zu ihrem Brandverhalten - Teil 6: Klassifizierung mit den Ergebnissen aus den Prfungen zum Brandverhalten von elektrischen Kabeln This European Standard was approved by CEN on 20 December 2013. CEN members are bound to comply with the CEN/CENELEC Internal

7、 Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

8、 member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versio

9、ns. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Po

10、land, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitatio

11、n in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13501-6:2014 EBS EN 13501-6:2014EN 13501-6:2014 (E) 2 Contents Page Foreword 4 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms, definitions and symbols .6 3.1 Terms and definitions .6 3.2 Symbols and a

12、bbreviations 9 4 Classes of reaction to fire performance 9 5 Test methods . 10 5.1 General . 10 5.2 Heat of combustion test (EN ISO 1716) 10 5.3 Vertical flame spread of single cable (EN 60332-1-2) 10 5.4 Burning behaviour and smoke production of bunched cable (EN 50399) . 10 5.5 Smoke production of

13、 burning cable (EN 61034-2) 10 5.6 Acidity of gases produced by burning cables (EN 50267-2-3) . 10 6 Principles for specimen preparation 10 7 Number of tests for classification . 11 7.1 Minimum number of tests 11 7.2 Additional tests . 11 7.3 Criteria for classification 11 7.4 Continuous parameters

14、. 11 7.5 Discontinuous parameters 11 8 Testing of electric cables (see Table 1) 12 8.1 Class Eca12 8.2 Classes Dca, Cca, B2ca12 8.3 Class B1ca12 8.4 Class Aca12 8.5 Additional classifications s1, s2, s3 for smoke production . 12 8.6 Additional classifications s1a, s1b for smoke production . 12 8.7 A

15、dditional classifications d0, d1, d2 for flaming droplets/particles 12 8.8 Additional classifications a1, a2, a3 for acidity . 12 9 Classification criteria for electric cables (see Table 1) . 13 9.1 General . 13 9.2 Class Fca. 13 9.3 Class Eca13 9.4 Class Dca13 9.5 Class Cca14 9.6 Class B2ca14 9.7 C

16、lass B1ca14 9.8 Class Aca15 9.9 Additional classifications s1, s1a, s1b, s2, s3 for smoke production . 15 9.9.1 General . 15 9.9.2 Additional classification s1 . 15 9.9.3 Additional classification s1a . 15 9.9.4 Additional classification s1b . 15 BS EN 13501-6:2014EN 13501-6:2014 (E) 3 9.9.5 Additio

17、nal classification s2 15 9.9.6 Additional classification s3 15 9.10 Additional classifications d0, d1, d2 for flaming droplets and/or particles 16 9.11 Additional classifications a1, a2, a3 for acidity 16 10 Presentation of classification 16 11 Field of application of the classification . 18 12 Clas

18、sification report 19 12.1 General . 19 12.2 Content and format . 19 Annex A (normative) Reaction to fire classification report for electric cables 22 A.1 Introduction 22 A.2 Details of classified product. 22 A.2.1 General . 22 A.2.2 Product description . 23 A.3 Reports and results in support of this

19、 classification 23 A.3.1 Reports . 23 A.3.2 Results 23 A.4 Classification and field of application . 24 A.4.1 Reference of classification . 24 A.4.2 Classification . 24 A.4.3 Field of application 24 A.5 Limitations . 24 Annex B (informative) Background information as regards the reaction to fire per

20、formance of cables 26 B.1 General . 26 B.2 Assumptions 26 B.3 Reference scenario and fire situations for cables . 26 Bibliography 29 BS EN 13501-6:2014EN 13501-6:2014 (E) 4 Foreword This document (EN 13501-6:2014) has been prepared by Technical Committee CEN/TC 127 “Fire safety in buildings”, the se

21、cretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2014, and conflicting national standards shall be withdrawn at the latest by September 2014. Attention

22、is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the

23、European Free Trade Association, and supports essential requirements of (EU) N305/2011. CEN, CENELEC and EOTA committees preparing technical specifications, which contain performance requirements against reaction to fire tests, should make reference to the reaction to fire classification given in th

24、is European Standard and not refer directly to any specific fire test method. This document has been prepared in cooperation with CLC/TC 20 “Electric cables”, CLC/TC 46X “Communication cables” and CLC/TC 86A “Optical fibre cables”. EN 13501 Fire classification of construction products and building e

25、lements consists of the following parts: Part 1: Classification using data from reaction to fire tests; Part 2: Classification using data from fire resistance tests, excluding ventilation services; Part 3: Classification using data from fire resistance tests on products and elements used in building

26、 service installations: fire resisting ducts and fire dampers; Part 4: Classification using data from fire resistance tests on components of smoke control systems; Part 5: Classification using data from external fire exposure to roofs tests; Part 6: Classification using data from reaction to fire te

27、sts on electric cables. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic o

28、f Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13501-6:2014EN 13501-6:2014 (E) 5 Introduction The aim of

29、 this European Standard is to define a harmonized procedure for the classification of reaction to fire of electric cables. This classification is based on the test procedures listed in Clause 5. This European Standard has been prepared in support of the second essential requirement in the EC Constru

30、ction Products Regulation (EU) N305/2011 and as detailed in the Interpretative Document Number 2: Safety in case of fire (OJ C62 Vol. 37). Background information on the Commission Decision regarding the classification of the reaction to fire performance of electric cables is given in Annex B. There

31、is a procedure by which certain products can be assigned a particular fire classification without the need for testing. Such products have well established reaction to fire performance and have been agreed by the Standing Committee on Construction. Agreements relating to such products which may be c

32、lassified without further testing (CWFT) are published in the Official Journal of the EC and are listed on the Nando-CPD database on the EC website (http:/europa.eu.int/comm/enterprise/construction). Part 1 of this European Standard covers classification resulting from reaction to fire tests for pro

33、ducts other than electric cables. Parts 2, 3 and 4 of this European Standard are concerned with classification resulting from fire resistance tests. Part 5 covers classification resulting from tests for external fire exposure to roofs. BS EN 13501-6:2014EN 13501-6:2014 (E) 6 1 Scope This European St

34、andard provides the reaction to fire classification procedure for electric cables. NOTE For the purpose of this European Standard the term “electric cables” covers all power, control and communication cables, including optical fibre cables. 2 Normative references The following documents, in whole or

35、 in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 50267-2-3, Common test methods for cable

36、s under fire conditions Tests on gases evolved during combustion of material from cables Part 2-3: Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity EN 50399, Common test methods for cables under fire conditions Heat r

37、elease and smoke production measurement on cables during flame spread test Test apparatus, procedures, results prEN 50575, Power, control and communication cables Cables for general applications in construction works subject to reaction to fire requirements CLC/FprTS 50576, Electric cables, extended

38、 application of test results EN 60332-1-2:2004, Tests on electric and optical fibre cables under fire conditions Part 1-2: Test for vertical flame propagation for a single insulated wire or cable Procedure for 1 kW pre-mixed flame (IEC 60332-1-2:2004) EN 61034-2, Measurement of smoke density of cabl

39、es burning under defined conditions Part 2: Test procedure and requirements (IEC 61034-2) EN ISO 1716, Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) (ISO 1716) 3 Terms, definitions and symbols 3.1 Terms and definitions For the purposes of this do

40、cument, the following terms and definitions apply. NOTE Where the definitions are identical to those in EN ISO 13943, this is indicated. 3.1.1 product material, element or component about which information is required, in the context of this standard, the product is an electric cable about which inf

41、ormation is required 3.1.2 material single basic substance or uniformly dispersed mixture of substances BS EN 13501-6:2014EN 13501-6:2014 (E) 7 3.1.3 external component external layer of the cable, i.e. the sheath 3.1.4 end use application real application of a product, in relation to all aspects th

42、at influence the behaviour of that product under different fire situations Note 1 to entry: It covers aspects such as its quantity, orientation, position in relation to other adjacent products, and its method of fixing. 3.1.5 fire performance response of a test specimen when exposed to a specific fi

43、re SOURCE: EN ISO 13943 3.1.6 reaction to fire response of a test specimen when it is exposed to fire under specified conditions in a fire test SOURCE: EN ISO 13943 3.1.7 fire scenario qualitative description of the course of a fire with respect to time, identifying key events that characterize the

44、studied fire and differentiate it from other possible fires SOURCE: EN ISO 13943 3.1.8 reference scenario hazard situation used as a reference for a given test method or classification system 3.1.9 fire situation stage in the development of a fire, characterised by the nature, severity and size of t

45、he thermal attack on the products involved 3.1.10 combustion exothermic reaction of a substance with an oxidizer SOURCE: EN ISO 13943 Note 1 to entry: Combustion generally emits effluent accompanied by flames and/or visible light. 3.1.11 heat of combustion thermal energy produced by combustion of un

46、it of mass of a given substance SOURCE: EN ISO 13943 Note 1 to entry: It is expressed in kilojoules per gram. BS EN 13501-6:2014EN 13501-6:2014 (E) 8 3.1.12 gross heat of combustion (PCS) heat of combustion of a substance when the combustion is complete and any produced water is entirely condensed u

47、nder specified conditions SOURCE: EN ISO 13943 3.1.13 net heat of combustion (PCI) heat of combustion of a substance when the combustion is complete and any produced water is in the vapour state under specified conditions SOURCE: EN ISO 13943 3.1.14 contribution to fire energy released by a product

48、influencing the fire growth both in pre- and post-flashover situations 3.1.15 heat release thermal energy produced by combustion SOURCE: EN ISO 13943 3.1.16 vertical flame spread (FS) damaged length of the sample, as measured in the EN 50399 test 3.1.17 vertical flame spread (H) distance from the up

49、per onset of charring (above the flame application point) to the lower onset of charring (below the flame application point) as measured in the EN 60332-1-2 test 3.1.18 fully developed fire state of total involvement of combustible materials in a fire SOURCE: EN ISO 13943 3.1.19 flashover transition to a state of total surface involvement in a fire of combustible materials within an enclosure SOURCE: EN ISO 13943 3.1.20 flaming droplets/particles material separating from the specimen during the fire test and continui