1、BRITISH STANDARDBS EN 13525:2005Forestry machinery Wood chippers SafetyICS 65.060.80g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58+A2:2009Copyrigh
2、t European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-National forewordThis British Standard is the the UK implementation of EN 13525:2005+A2:2009. It supersedes BS EN 13525:2005 which is with
3、drawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted to
4、 Technical Committee AGE/29, Forestry machinery. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance w
5、ith a British Standard cannot confer immunity from legal obligations.BS EN 13525:2005+A2:2009This British Standard was published under the authority of the Standards Policy and Strategy Committee on 27 June 2005 BSI 2010Amendments/corrigenda issued since publicationAmd. No. Date Comments 17182 29 Ju
6、ne 2007Implementation of CEN amendment A1:2007 28 February 2010 Implementation of CEN amendment A2:2009ISBN 978 0 580 62475 9Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROP
7、EAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13525:2005+A2 October 2009 ICS 65.060.80 Supersedes EN 13525:2005+A1:2009 English Version Forestry machinery - Wood chippers - Safety Machines forestires - Dchiqueteuses - Scurit Forstmaschinen - Buschholzhacker - Sicherheit This European Standard was
8、approved by CEN on 8 December 2004 and includes Amendment 1 approved by CEN on 13 April 2007 and Amendment 2 approved by CEN on 17 August 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a n
9、ational standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version
10、in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmar
11、k, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATI
12、ON EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13525:2005+A2:2009: ECopyright European Committee for Standardization Provided by IHS under
13、 license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 13525:2005+A2:2009 (E) 2 Contents Page Foreword 4 Introduction 51 Scope 62 Normative references 73 Terms and definitions .84 Safety requirements and/or measures . 104.1 General . 104.2 Operator con
14、trols 104.2.1 General . 104.2.2 Starting the machine 104.2.3 Stopping the machine 114.2.4 Infeed stop control 114.2.5 Safety and reliability of control systems 154.3 Protection against mechanical hazards . 164.3.1 Stability 164.3.2 Risk of break-up during operation 164.3.3 Hazards related to infeed
15、components and chipping components 174.3.4 Risks due to ejected objects . 194.3.5 Protection against access to moving power transmission parts 194.4 Protection against non-mechanical hazards . 204.4.1 Noise 204.4.2 Hydraulic components . 214.4.3 Hot surfaces 214.4.4 Electrical hazards . 214.5 Prepar
16、ation for transport and maintenance . 225 Verification of the safety requirements and/or measures 235.1 General . 235.2 Stability 235.3 Chipping components risk of break-up 245.4 Hot surfaces 245.4.1 Temperature measuring equipment 245.4.2 Test method . 245.4.3 Test acceptance 255.5 Verification of
17、requirements on noise Measurement of noise emission . 256 Information for use . 256.1 Instruction handbook . 256.2 Marking 276.3 Warnings 27Annex A (normative) List of significant hazards . 29Annex B (normative) Noise test code - Engineering method (grade 2) 33Annex C (normative) !Machines with inte
18、grated feed chain conveyor“ 37Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC, amended by Directive 98/79/EC . 40BS EN 13525:2005+A2:2009Copyright European Committee for Standardization Provided by IHS under license with CENN
19、ot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 13525:2005+A2:2009 (E) 3 Annex ZB (informative) #Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC$ 41Bibliography 42BS EN 13525:2005+A2:2009Copyright European Com
20、mittee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 13525:2005+A2:2009 (E) 4 Foreword This document (EN 13525:2005+A2:2009) has been prepared by Technical Committee CEN/TC 144 “Tractors and machinery f
21、or agriculture and forestry”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2010 and conflicting national standards shall be withdrawn at the lat
22、est by April 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2007-04-13 a
23、nd Amendment 2, approved by CEN on 2009-08-17. This document supersedes #EN 13525:2005+A1:2009$. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“ and # $. This document has been prepared under a mandate given to CEN by the European Commission and th
24、e European Free Trade Association, and supports essential requirements of EU Directive(s). #For relationship with EU Directives, see informative Annexes ZA and ZB, which are integral parts of this document.$ According to the CEN/CENELEC Internal Regulations, the national standards organizations of t
25、he following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak
26、ia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 13525:2005+A2:2009Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 13525:2005+A2:2009 (E) 5 Introduction This
27、 document is a type C standard as stated in EN ISO 12100-1. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document. When provisions of this type C standard are different from those, which are stated in type A o
28、r B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of this type C standard. BS EN 13525:2005+A2:2009Copyright European Committee for Standardization Provided by I
29、HS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 13525:2005+A2:2009 (E) 6 1 Scope This document specifies safety requirements and their verification for design and construction of transportable, i.e. self-propelled, mounted, semi-mounted
30、and trailed, wood chippers used in forestry, agriculture, horticulture and landscaping. !This document applies to chippers, used when stationary, which are manually loaded with wood through a horizontal or near horizontal infeed chute and where the infeed action is performed by the chipping componen
31、ts acting as infeed components or by separate integrated infeed components such as rollers or chain conveyors integral to the infeed chute. The included wood chippers may be powered either by an external power take-off, hydraulics etc. or by an integral power source such as an internal combustion en
32、gine.“ This document does not cover: requirements relating to national road regulations arising from transport between work sites; hazards arising from any self-propelled function; hazards arising from the transmission of power from an external power source e.g. power take-off drive shafts; !any mac
33、hines where the infeed chute is fitted with an extension table or the integrated chain conveyor is protruding beyond the outermost lower edge of the infeed chute;“ hazards arising from the engine pull starting of an integral power source; hazards arising from mechanical loading; vertical infeed chut
34、e chippers; electromagnetic aspects of the chippers; shredders/chippers to be covered by EN 13683; !any machines where the infeed chute is fitted with a belt type conveyor; mechanical discharge systems.“ This document deals with all significant hazards, hazardous situations and events relevant to wo
35、od chippers, when they are used as intended and under the conditions foreseen by the manufacturer (see Annex A). In addition, it specifies the type of information to be provided by the manufacturer on the safe use of these machines. It is not applicable to environmental hazards (except noise). This
36、document is not applicable to wood chippers which are manufactured before the date of publication of this document by CEN. BS EN 13525:2005+A2:2009Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without lice
37、nse from IHS-,-,-EN 13525:2005+A2:2009 (E) 7 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any am
38、endments) applies. EN 294:1992, Safety of machinery Safety distance to prevent danger zones being reached by the upper limbs EN 563:1994, Safety of machinery Temperatures of touchable surfaces Ergonomics data to establish temperature limit values for hot surfaces EN 811:1996, Safety of machinery Saf
39、ety distances to prevent danger zones being reached by the lower limbs EN 953:1997, Safety of machinery Guards General requirements for the design and construction of fixed and movable guards EN 954-1:1996, Safety of machinery Safety-related parts of control systems Part 1: General principles for de
40、sign EN 982:1996, Safety of machinery Safety requirements for fluid power systems and their components Hydraulics EN 1175-2:1998, Safety of industrial trucks Electrical requirements Part 2: General requirements of internal combustion engine powered trucks EN 10025-2:2004, Hot rolled products of stru
41、ctural steels - Part 2: Technical delivery conditions for non-alloy structural steels EN 60204-1:1997, Safety of machinery Electrical equipment of machines Part 1: General requirements (IEC 60204-1:1997) EN 60529:1991, Degrees of protection provided by enclosures (IP Code) (IEC 60529:1989) EN 60947-
42、5-1:2004, Low-voltage switchgear and controlgear Part 5-1: Control circuit devices and switching elements Electromechanical control circuit devices (IEC 60947-5-1:2003) EN ISO 3744:1995, Acoustics Determination of sound power levels of noise sources using sound pressure - Engineering method in an es
43、sentially free field over a reflecting plane (ISO 3744:1994) EN ISO 4871:1996, Acoustics Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) EN ISO 9614-1:1995, Acoustics Determination of sound power levels of noise sources using sound intensity Part 1: M
44、easurements at discrete points (ISO 9614-1:1993) EN ISO 9614-2:1996, Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996) EN ISO 11201:1995, Acoustics Noise emitted by machinery and equipment Measurement of emissio
45、n sound pressure levels at a work station and at other specified positions Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995) EN ISO 11204:1995, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station an
46、d at other specified positions Method requiring environmental corrections (ISO 11204:1995) BS EN 13525:2005+A2:2009Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 13525:2005+A
47、2:2009 (E) 8 EN ISO 11688-1:1998, Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning (ISO/TR 11688-1:1995) EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology (ISO 12100-1:2003)
48、 EN ISO 12100-2:2003, Safety of machinery Basic concepts, general principles for design Part 2: Technical principles (ISO 12100-2:2003) ISO 4413:1998, Hydraulic fluid power General rules relating to systems ISO 11684:1995, Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Safety signs and hazard pictorials General principles I
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1