EN 13541-2012 en Glass in building - Security glazing - Testing and classification of resistance against explosion pressure《建筑玻璃 安全玻璃 抗爆性的试验和分类》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 13541:2012Glass in building Securityglazing Testing andclassification of resistanceagainst explosion pressureBS EN 13541:2012 BRITISH STANDARDNational forewordThis British

2、Standard is the UK implementation of EN 13541:2012. Itsupersedes BS EN 13541:2001 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee B/520/3, Security glazing.A list of organizations represented on this committee can beobtained on request to its secretary.

3、This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 75236 0ICS 13.230; 81.040.20Compliance with a British Standard cannot

4、 confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 June 2012.Amendments issued since publicationDate Text affectedBS EN 13541:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13541 February 2012 I

5、CS 13.230; 81.040.20 Supersedes EN 13541:2000English Version Glass in building - Security glazing - Testing and classification of resistance against explosion pressure Verre dans la construction - Vitrage de scurit - Mise essai et classification de la rsistance la pression dexplosion Glas im Bauwese

6、n - Sicherheitssonderverglasung - Prfverfahren und Klasseneinteilung des Widerstandes gegen Sprengwirkung This European Standard was approved by CEN on 31 December 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

7、Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (En

8、glish, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium

9、, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN

10、 COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13541:2012: EBS EN 13541:2012EN

11、13541:2012 (E) 2 Contents Page Foreword 3Introduction .41 Scope 52 Normative references 53 Terms and definitions .54 Classification and designation .65 Test pieces for type testing 75.1 Type, dimensions and marking 75.2 Number of test pieces .76 Requirements .77 Test Method 77.1 Apparatus .77.1.1 Sp

12、ecimen holder 77.1.2 Device for generating the explosive blast .87.1.3 Measuring device .87.2 Preparation of test procedure 87.2.1 Test specimen temperature condition .87.2.2 Test procedure .88 Test report and test report summary .98.1 Test report 98.2 Test report summary (optional) 9Bibliography .

13、10BS EN 13541:2012EN 13541:2012 (E) 3 Foreword This document (EN 13541:2012) has been prepared by Technical Committee CEN/TC 129 “Glass in building”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identica

14、l text or by endorsement, at the latest by August 2012, and conflicting national standards shall be withdrawn at the latest by August 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held respo

15、nsible for identifying any or all such patent rights. This document supersedes EN 13541:2000. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. According to the CEN/CENELEC Internal Regulations, the national standards org

16、anizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, P

17、ortugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13541:2012EN 13541:2012 (E) 4 Introduction The choice of an explosion pressure resistant glazing material (e.g. security and/or anti terrorism glazing product) in an individual case should be estab

18、lished by the user. Experts in the field of explosions are able to determine in most situations the expected level and duration of the shock wave, based on the type of explosion and the distance from the heart of the explosion. The classification of explosion pressure resistance is based on the maxi

19、mum overpressure of the reflected shock wave and the duration of the overpressure phase. BS EN 13541:2012EN 13541:2012 (E) 5 1 Scope This European Standard specifies a test method, performance requirements and classification for explosion pressure resistant glazing for use in buildings. The explosio

20、n pressure resistant glazing is intended to offer resistance against explosives with respect to human safety. This European Standard concerns a method of test against blast waves generated using a shock tube or similar facility to simulate a high explosive detonation. The classification is only vali

21、d for tested glass sizes of about 1 m2. Based on theoretical considerations and/or experimental work, the results can be used for estimating the explosion-pressure-resistance of other glass sizes. NOTE 1 The resistance classes are not assigned to specific situations. For each individual case the ind

22、ividual who specifies, if necessary with the help of experts in the field of explosion, should be consulted. NOTE 2 The protection provided by explosion-resistant-glazing not only depends on the product itself, but also on the design and fixing of the glass. 2 Normative references The following docu

23、ments, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 48, Rubber, vulcanize

24、d or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 explosion pressure resistant glazing security glazing that affords a defined resistance against a specified e

25、xplosive blast NOTE The glass and/or plastics component of an explosion pressure resistant glazing unit may be separated by air spaces. 3.2 sample number of nominally identical glazing units on which type testing is performed for a certain explosion pressure class 3.3 shock tube tube with sufficient

26、 dimensions and rigidity in order to generate a plane shock wave as from a spherical detonation 3.4 test piece one member of the sample prepared for testing BS EN 13541:2012EN 13541:2012 (E) 6 3.5 attack face face of the explosion pressure resistant glazing, marked by the manufacturer and/or supplie

27、r, that is designed to face the explosive blast 4 Classification and designation Table 1 specifies the classification of and the appropriate test conditions for explosion pressure resistant glazing. If all three test pieces of the sample fulfil the performance requirements of a certain class accordi

28、ng to Clause 6, and the test conditions lie within the tolerance given in Table 1, then the glazing product may be classified in the relevant class. When a security glass pane achieves a particular class, it also automatically achieves all lower classes. Table 1 Classification of explosion-pressure-

29、resistant glazing Classification Code Characteristics of the plane shock wave Maximum overpressure of the reflected blast wave Pr (kPa) Positive specific impulse i+(kPa ms) Duration of the overpressure phase t+(ms)ER1 50 pr 100 370 i+ 900 20 ER2 100 pr 150 900 i+ 1500 20 ER3 150 pr 200 1500 i+ 2200

30、20 ER4 200 pr 250 2200 i+ 3200 20 NOTE 1 The specific impulse (i+) results from the pressure-time history versus time, in accordance with EN 13123-1. Annex A of EN 13123-1 specifies the methods to be applied by the testing laboratory in order to obtain consistent measurements and derivations of the

31、parameters of test shock waves to be used in the comparison with the classification parameters specified in Table 1. () ()Aexp11/A1/A2ttpdttp0+=ri (1) where: pris the maximum overpressure; t+is the duration of the positive pressure phase; A is the wave form parameter (values lie between 0 and 4). NO

32、TE 2 No extrapolation can be made for bigger samples. BS EN 13541:2012EN 13541:2012 (E) 7 5 Test pieces for type testing 5.1 Type, dimensions and marking The construction and materials of the test pieces shall comply with the specification of the manufacturer. The test pieces (or the sample) submitt

33、ed for type testing shall be representative of the normal production. The dimensions of the test pieces shall be: length (1100 5) mm; width (900 5) mm. The edges of the test pieces should be raised for ease of handling. The sample shall be identified with a permanent label or removable label, which

34、may not be removed, indicating, as a minimum, the attack face of the product. 5.2 Number of test pieces The sample submitted for testing shall consist of three test pieces for each attack face and each class for which testing shall be required. NOTE One extra test piece should be supplied in case of

35、 transport breakage or other logistic handling. 6 Requirements Each of the three test pieces of a sample, according to Clause 5, submitted for testing, shall comply with the following requirements when tested according to Clause 7: the test piece shall not have any “through“ holes, from the front to

36、 the back; no openings from the front to the back as defined in this standard shall be permitted between the clamping frame and the edges of the test piece. NOTE An opening between the clamping frame and the edges of the test piece can be caused by insufficient clamping pressure. If so, the test can

37、 be repeated with a higher clamping pressure. In this case the test report shall state the applied clamping pressure. 7 Test Method 7.1 Apparatus 7.1.1 Specimen holder The specimen holder shall be intrinsically rigid, and rigidly fixed onto a solid foundation and/or into solid masonry. The specimen

38、holder shall have facilities to ensure: plane parallel clamping of the test piece in a vertical position; support of the test piece only by the frame; BS EN 13541:2012EN 13541:2012 (E) 8 clamping of the edges on all sides over an edge width of (50 10) mm; clamping between rubber strips of (50 2) mm

39、wide and (4 1) mm thick, and hardness (50 10) IRHD in accordance with ISO 48; a clamping pressure of (14 3) N/cm2; around the edges a shield not less than 1000 mm wide and/or meeting the wall of the blast tube; that the surface of the attack face of the shield is plane with the surface of the specim

40、en holder; that the surface of the attack face of the test piece recesses not more than 20 mm behind the surface of the specimen holder. 7.1.2 Device for generating the explosive blast A shock tube or a similar device for generating the desired explosive blast shall ensure the consistent reproductio

41、n of a plane shock wave normal to the attack face of the specimen. The shock wave shall simulate this from a spherical non-fragmenting high explosive charge. The overpressure phase should be of a form which can be related to that from a spherical charge of a known weight of trinitrotoluene (TNT) det

42、onating at a known distance. 7.1.3 Measuring device The measuring device shall permit the determination of the magnitude and time of development of the overpressure of the shock wave reflected from the attack face of the specimen with an accuracy of 5 %. 7.2 Preparation of test procedure 7.2.1 Test

43、specimen temperature condition The surface and mass temperature of the test specimen shall be at a temperature of (18 5) C. The test piece shall be stored for at least 12 hours prior to the test in that range. The ambient testing conditions may be (18 10) C. 7.2.2 Test procedure For each test, the f

44、ollowing procedure shall be followed: clamp the test piece into the specimen holder according to 7.1.1; ensure that the edges of the test piece fully contact the supporting surface; determine the target values for the maximum overpressure, the positive specific impulse and the duration of the overpr

45、essure phase according to the requested class; initiate the blast load; measure the pressure-time parameters of the reflected blast wave; determine the actual values of the maximum overpressure and duration of the overpressure phase; inspect the test piece for openings penetrating the whole thicknes

46、s of the sample and for openings from the front to the back between frame and edges. NOTE Each test piece may be exposed to only one blast, as each blast causes weakening. BS EN 13541:2012EN 13541:2012 (E) 9 8 Test report and test report summary 8.1 Test report The following items shall be included

47、in the test report as a minimum: the name and address of the testing laboratory; test report number; date of test; reference to this standard; name (trade name or descriptive name) of the glazing product; name and address of the company or authority submitting the sample for test; description of the

48、 construction of the security glazing product (material, number, thickness and sequence of the layers) which have been previously submitted by the applicant before testing; attack face, temperature of the test specimen storage room and surface; temperature, and the ambient test temperature condition

49、; characteristics of the shock wave according to Table 1. class of resistance against explosive blast, i.e.: EN 13541-ER1, EN 13541-ER2, EN 13541-ER3 or EN 13541-ER4 NOTE Results of the tests can be further notated with the addition of an S or NS. Suffix “NS”,no splintering, means that no fragmentation occurred of the last pane rear face of the test piece, suffix “S”, splintering, the last