EN 13543-2001 en Manufactured Articles Filled with Feather and down - Measurement of Water Absorption of Filling Material《羽绒制品 填充材料吸水性的测量》.pdf

1、BRITISH STANDARD Manufactured articles filled with feather and down Measurement of water absorption of filling material The European Standard EN 13543:2001 has the status ofa British Standard ICs 59.040 BS EN 13543:2001 Wk present to the responsible European committee any enquiries on the interpreta

2、tion, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. - A list of organizations represented on this committee can be obtained on request to its secretary. Cr oss-r e fer enc e s The British Standards

3、which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard doe

4、s not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an insi

5、de front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. O BSI 30 November 200 1 ISBN O 580 38738 O EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13543 October 2001 IC

6、s 59.040 English version Manufactured articles filled with feather and down - Measurement of water absorption of filling material Articles manufacturs garnis avec des plumes et duvets - Mesure de labsorption deau du matriau de garnissage Fertigartikel gefllt mit Federn und Daunen - Messung der Wasse

7、raufnahme von Fllstoff This European Standard was approved by CEN on 11 August 2001. CEN members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists an

8、d bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibili

9、ty of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands,

10、 Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION EUROPISCHES KOMITEE FR NORMUNG COMIT EUROPEN DE NORMALISATION Management Centre: rue de Stassart, 36 B-1050 Brussels O 2001 CEN All rights of exploitation in any form and by any means reserved wo

11、rldwide for CEN national Members. Ref. No. EN 13543:2001 E EN 13543:2001 (E) Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions 4 4 Principle 4 5 Reagent . 4 6 Apparatus . 5 7 Sampling. conditioning and testing . 5 8 Procedure . 5 9 Expression of results 5 10 Precisi

12、on . 6 11 Test report 6 2 EN 13543:2001 (E) Foreword This European Standard has been prepared by Technical Committee CEN/TC 222 “Feather and down as filling material for any article, as well as finished articles filled with feather and down I, the secretariat of which is held by UNI. This European S

13、tandard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2002, and conflicting national standards shall be withdrawn at the latest by April 2002. According to the CENKENELEC Internal Regulations, the national stand

14、ards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. 3 EN 13543:

15、2001 (E) 1 Scope This European standard describes a method to determine the absorption of water of a filling of feathers and downs. The absorption of water is defined by the capacity and the time of absorption. 2 Normative references This European standard incorporates by dated or undated reference,

16、 provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European standard only when incorporated i

17、n it by amendment or revision. For undated references, the latest edition of the publication referred to applies (including amendments). EN 1883 Feather and down - Sampling in view of tests EN 20139 Textiles - Standard atmospheres for conditioning and testing (IS0 139:1973) EN 20187 Paper, board and

18、 pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (IS0 187:1990) EN IS0 3696 Water for analytical laboratory use - Specification and test methods (IS0 3696:1987) 3 Terms and definitions For the purposes of this standard

19、the following terms and definitions apply. 3.1 time of absorption time required for the saturation of a test specimen in defined condition 3.2 capacity of absorption mass of water, under specified conditions, in a fully saturated test specimen, expressed as a percentage of the mass of the conditione

20、d test specimen constant mass mass reached when two consecutive weights are equivalent to the nearest gram 4 Principle A given quantity of feather and down is placed in a bag of defined dimension. The bag is immersed in water for a specified period of time. After this period, the bag is put to drain

21、 and then weighed. The procedure is repeated until constant mass (3.3). 5 Reagent Water of grade 3, conforming with EN IS0 3696 to (20 f 2)“C 4 EN 13543:2001 (E) 6 Apparatus 6.1 Tank of immersion having minimal dimensions 400 mm x 400 mm x 300 mm. 6.2 Polyester (or polyamide) carrier bags prepared a

22、fter cut in a knit ladderproof chain, having a maximal mass of 50 g/m2. Dimensions of bags (120 f 5) mm x (150 f 5) mm. A small side and a face are left open. Bags are fitted with handles. Identify each bag by marking it by means of yarns and knots to the number of 1, 2, etc. 6.3 Bars of metal (in s

23、tainless steel) of length (350 f 1 O) mm and having a minimal mass of 500 g. 6.4 Balance with an accuracy of 0,Ol g 6.5 Chronometer 7 Sampling, conditioning and testing 7.1 Take the sample of test according to EN 1883 7.2 Conditioning and testing are undertaken according to EN 20139. The temperature

24、 and the relative humidity are measured according to EN 20187 8 Procedure 8.1 Fill the tank of immersion with water (clause 5) to a height of at least 200 mm. 8.2 Of the conditioned laboratory sample, take 4 test specimens of filling identified as a, b, c and d, each of (IO f 0,l) g and place them c

25、arefully in their bags by the unpicked side (6.2) marked 1, 2, 3 and 4. Close the bags by sewing. Weigh each bag containing the filling to the nearest 0,l g. Mla, Mqb, Mlc, kqd being these masses. 8.3 Pass the bar of metal to the breadth of the handles. Place the bar on the bottom of the tank of imm

26、ersion, with the result that bags float to the surface but remain under the level of the water and do not touch between them. Launch the chronometer for a duration of at least 60 min. 8.4 At the end of this period of time pull bags off the tank of immersion after having removed bars. Suspend bags to

27、 a thread in the standard atmosphere. Leave to drain during 30 min. Avoid to eliminate the excess bag water during the manipulation. Weigh bags containing the filling wetted to the nearest 0,l g. Mza, MZb, Mzc, and Mzd being these masses 8.5 Repeat the procedure of immersion, drainage and weighing a

28、ccording to an equal time, until constant mass (3.3). 8.6 Examine each weighing result of the series Mz (a, b, c. d) and verify that differences of mass do not exceed 15%. If such was the case, resume tests at the beginning. If differences persist, record them, calculate them and indicate in the rep

29、ort of test the individual results by even of values (Mia, Mza; Mqb, MZb; Mlc, Mzc; Mqd, /i MI, is the mass before the test, expressed to the nearest 0,l g; M2 is the mass after the test, expressed to the nearest 0,l g. 9.2 Calculate the absorption of water in percentage according to the formula M.1

30、00 Mo =- M, where Mo is the capacity of water absorption in percentage; M is the mean quantity of water retained expressed in g to the nearest 0,l g MI is the mean mass of samples (a,b,c,d) conditioned before the test expressed to the nearest 0,l g 10 Precision At the moment of drafting this Europea

31、n standard, data on repeatability and reproducibility are not available. 11 Test report The test report of test shall include at least the following information : a) reference to this standard; b) date and place of the test; c) identification of the sample tested; d) the average result of the water

32、absorption in percentage expressed to the closest integer; e) the immersion time until constant mass; f) any deviation from the specified procedure and any unusual features observed during the test. 6 BS EN 13543:2001 BSI 389 Chiswick High Road Lon don w4 4AL BSI is the independent national body res

33、ponsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Re vi si ons British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest

34、amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can

35、be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards pu

36、blications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as

37、British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which giv

38、e details on all its products and services. Contact the Information Centre. Tel: 020 8996 71 11. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details ofthese and other benefits

39、 contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, ofthe publications of the international standard

40、ization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means - electronic, photocopying, recording or otherwise -without prior written permission from BSI. This does not pre

41、clude the free use, in the course of implementing the standard, ofnecessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then the prior written permission ofBSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.