EN 13567-2002 en Protective clothing - Hand arm chest abdomen leg genital and face protectors for fencers - Requirements and test methods (Incorporates Amendment A1 2007)《防护服 剑术师的手.pdf

1、BRITISH STANDARDBS EN 13567:2002 +A1:2007Protective clothing Hand, arm, chest, abdomen, leg, genital and face protectors for fencers Requirements and test methodsICS 13.340.01g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3

2、g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 13567:2002+A1:2007This British Standard was published under the authority of the Standards Policy and Strategy Committee on 5 August 2002 BSI 2008ISBN 978 0 580 61983 0National forewordThis British Standard is the UK im

3、plementation of EN 13567:2002+A1:2007. It supersedes BS EN 13567:2002, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amen

4、dment A1 is indicated by !“.The UK participation in its preparation was entrusted by Technical Committee PH/3, Protective clothing, to Subcommittee PH/3/11, Protective equipment for sports players.A list of organizations represented on this subcommittee can be obtained on request to its secretary.Th

5、is publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments/corrigenda issued since publicationDate Comments30 May 2008 Implementat

6、ion of CEN amendment A1:2007EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13567:2002+A1 June 2007 ICS 13.340.10 Supersedes EN 13567:2002English Version Protective clothing - Hand, arm, chest, abdomen, leg, genital and face protectors for fencers - Requirements and test methods Vtements de pro

7、tection - Protection des mains, des bras, de la piotrine, de labdomen, des jambes, gnitales et de la face pour les escrimeurs - Exigences et mthodes dessaiSchutzkleidung - Hand-, Arm-, Brustkorb-, Unterleibs-, Bein-, Genital- und Gesichtsschtzer fr Fechter - Anforderungen und Prfverfahren This Europ

8、ean Standard was approved by CEN on 25 March 2002 and includes Amendment 1 approved by CEN on 10 May 2007. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterati

9、on. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by transla

10、tion under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany,

11、 Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Man

12、agement Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13567:2002+A1:2007: E2 Contents page Foreword3 Introduction .4 1 Scope 4 2 Normative references 4 3 Terms and definitions .5 4

13、 Requirements.9 4.1 General9 4.2 Innocuousness.9 4.3 Ergonomic requirements 9 4.4 Restraint requirements .9 4.5 Sizing 9 4.6 Minimum dimensions of zones of protection .10 4.7 Construction materials and construction details.18 4.8 Penetration resistance 20 4.9 Burst strength of seams .22 5 Test metho

14、ds22 5.1 Instruments 22 5.2 Products for testing.22 5.3 Conditioning of products23 5.4 Innocuousness.23 5.5 Ergonomic testing .23 5.6 Sizing 24 5.7 Examination of zones of protection.24 5.8 Restraint testing of masks24 5.9 Bib attachment testing 25 5.10 Penetration testing 26 5.11 Burst testing.35 6

15、 Marking .36 7 Information to be supplied by the manufacturer36 Annex A (informative) Information about determining the chemical innocuousness of protective clothing and equipment 38 A.1 General38 A.2 Evidence of innocuousness .38 A.3 Possible specific innocuousness testing .38 Annex B (informative)

16、 Levels of protection.40 B.1 Performance levels40 B.2 Performance of combinations40 B.3 Fencing jackets, breeches and underpants40 B.4 Masks - bibs .41 Annex C (informative) Visors and masks made of material other than steel wire mesh 42 Annex ZA (informative) Clauses of this European Standard addre

17、ssing essential requirements or other provisions of EU Directives43 Bibliography44 BS EN 13567:2002+A1:20073 Foreword This document (EN 13567:2002+A1:2007) has been prepared by Technical Committee CEN/TC 162 “Protective clothing including hand and arm protection and lifejackets“, the secretariat of

18、which is held by DIN. This document shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2007 and conflicting national standards shall be withdrawn at the latest by December 2007. This document includes Amendment 1,

19、 approved by CEN on 2007-05-10. This document supersedes EN 13567:2002. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Associatio

20、n, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to impl

21、ement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland

22、 and United Kingdom. BS EN 13567:2002+A1:20074 Introduction Fencing by virtue of being a combat sport in which body contact by the weapon occasionally (but usually inadvertently) occurs outside the zones of protection, is by its nature dangerous. Protective clothing and equipment for fencers is inte

23、nded as far as possible to prevent injuries, or in the worst cases to reduce the severity of injuries, particularly by the point of the weapon. Broken blades pose a particular threat. The circumstances of the breakage of blades may result in high tip velocities and consequent high energy impacts by

24、the broken blade. Broken blades have been known to penetrate protective equipment with fatal consequences. No practical clothing is capable of withstanding all broken blade impacts. In this standard the concept of the optimum level of protection has been taken into account. This concept is that the

25、level of protection specified should be as high as it can be, without causing such unacceptable discomfort or impediment to fencing movements that fencers would not use the protective clothing. The clothing specified in this standard provides two levels of protection perceived by the organisers and

26、participants in the sport to be appropriate. Its use is expected to reduce risks of injuries to fencers to a tolerable level. 1 Scope This European Standard specifies the general requirements for ergonomics, sizing, coverage and performance of protective clothing and equipment for use in the sport o

27、f fencing. Requirements for the marking of clothing and equipment and the information to be supplied by the manufacturer are given. Test methods are described and performance levels are defined. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from

28、 other publications. These normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendme

29、nt or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 166:2001, Personal eye-protection Specifications. EN 388, Protective gloves against mechanical risks. EN 420, General requirements for gloves. EN 1082-1:1996, Protective clothi

30、ng Gloves and arm guards protecting against cuts and stabs by hand knives Part 1: Chain mail gloves and arm guards. EN ISO 5084:1996, Textiles Determination of thickness of textiles and textile products (ISO 5084:1996). EN 13546:2002, Protective clothing Hand, arm, chest, abdomen, leg, foot and geni

31、tal protectors for field hockey goal keepers, and shin protectors for field players Requirements and test methods. EN 13595-3:2002, Protective clothing for professional motorcycle riders Jackets, trousers and one-piece or divided suits Part 3: Test method for determination of burst strength. EN ISO

32、13938-1:1999, Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension (ISO 13938-1:1999). BS EN 13567:2002+A1:20075 EN ISO 13938-2:1999, Textiles Bursting properties of fabrics Part 2: Pneumatic method for determination of burst

33、ing strength and bursting distension (ISO 13938-2:1999). !deleted text“ ISO 3758, Care labelling code using symbols. ISO 6330:2000, Textiles Domestic washing and drying procedures for textile testing. ISO 7500-1:1999, Metallic materials Verification of static uniaxial testing machines Part 1: Torsio

34、n/compression testing machines Verification and calibration of the force-measuring system. ISO 8559:1989, Garment construction and anthropometric surveys Body dimensions. 3 Terms and definitions For the purposes of this European Standard, the following terms and definitions apply. 3.1 protective clo

35、thing and equipment clothing and specific devices worn on the body, arms, hands and legs and over the face and neck, that are intended to reduce the severity of injuries from fencing weapons 3.2 zone of protection area of protective equipment that is intended to provide protection, and is subject to

36、 specific testing 3.3 coverage area of the fencers body covered by the whole item of protective clothing or equipment and its attachments 3.4 garment unit of clothing which itself has an integral zone of protection replacing or in addition to an article of non-protective clothing 3.5 handedness desi

37、gns and the markings on equipment that relate to its intended use by fencers holding their weapons in the right hands or left hands or whether the equipment is for ambidextrous use by right or left handed fencers 3.6 performance level number designating the level of the protection that it is intende

38、d the product should provide. This number is used in designating the test severity to which the product is to be subjected. For non-normative guidance on performance levels and the choice of equipment see annex B 3.7 fencing International and Olympic sport based on European duelling with swords and

39、embracing disciplines characterised by the relevant weapons 3.8 weapon collective term covering the following specific swords used in fencing BS EN 13567:2002+A1:20076 3.8.1 foil rectangular section blade conventional duelling weapon with which hits are scored with the point only. The target is the

40、anterior of the torso including the abdomen and the posterior torso down to the waist. The head, arms and legs are excluded, but are often hit 3.8.2 epee traditional duelling weapon of V section blade with which hits are scored only with the point, and for which the target is the whole body, includi

41、ng the head and feet 3.8.3 sabre weapon derived from the Cavalry sabre with a blunt cutting edge. Hits are scored with any part of the blade. The target is the whole body above the waist with the exception of the hands 3.9 point expanded and/or flattened end of the blade of a weapon so designed as t

42、o reduce the possibility of the perforation of the protective clothing 3.10 fencing mask protective device covering the face and sides of the head and the front of the neck. The parts are illustrated in Key ! a) Front view b) Side view “ 1 Hard shell 2 Lateral protection 3 Bib 4 Visor (optional) Fig

43、ure 1 Component parts of a fencing mask BS EN 13567:2002+A1:20077 3.10.1 hard shell framework, part of which is see-through covering the face of the head 3.10.2 lateral protection framework, part of which can be see-through covering the sides of the head and meeting over the top of the head 3.10.3 m

44、ask bib protective element covering the front of the neck 3.10.4 visor optional transparent area of the mask replacing part or all of the hard shell 3.10.5 join any junction between the hard shell and visor, or hard shell or visor and the lateral protection 3.10.6 see-through area region of the hard

45、 shell through which a fencer is able to see their opponent 3.11 fencing clothing clothing designed specifically for the sport of fencing 3.11.1 fencing jacket garment covering the full length of both arms from the wrist to the shoulder, the chest and at least the upper part of the abdomen 3.11.2 fe

46、ncing breeches (trousers) garment covering the abdomen, thighs and knees (and occasionally the lower leg) 3.11.3 fencing underpants protective garment covering the abdomen and upper half of the thigh. If used, this garment is worn inside the trousers 3.11.4 (fencing) under plastron one armed garment

47、 worn under a jacket covering at least part of the weapon arm, the axilla (armpit) of the weapon arm and part of the chest wall on the same side NOTE There are two-armed under plastrons which cover both of the fencers arms. These are generally used by sabre fencers to reduce bruising. 3.11.5 fencing

48、 gloves clothing covering the hand, wrist and part of the forearm of the fencer 3.11.6 long fencing socks garments covering the feet and the lower part of the leg to just above the knee BS EN 13567:2002+A1:20078 3.12 fencing breast protector device worn over the breasts by lady fencers. The devices

49、may be in one part or may consist of two, or may be elements for fitting into the inside of the front of the jacket or into the brassiere, or other garment 3.13 genital protector device worn inside the trousers to protect the genitalia 3.14 body dimensions 3.14.1 stature (height) vertical distance between the crown of the head and the ground measured with the subject standing upright without shoes and with their feet together 3.14.2 chest girth maximum horizontal girth measured during normal breathing with the subject standing u