EN 13659-2015 en Shutters and external venetian blinds - Performance requirements including safety《百叶窗和外部百叶帘 包括安全的性能要求》.pdf

1、BSI Standards PublicationBS EN 13659:2015Shutters and external venetianblinds Performancerequirements including safetyBS EN 13659:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13659:2015. Itsupersedes BS EN 13659:2004+A1:2008 which is withdrawn.The UK par

2、ticipation in its preparation was entrusted to TechnicalCommittee B/538/3, Domestic shutters and blinds.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are r

3、esponsible for its correctapplication. The British Standards Institution 2015. Published by BSI StandardsLimited 2015ISBN 978 0 580 86855 9ICS 91.060.50Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStanda

4、rds Policy and Strategy Committee on 31 May 2015.Amendments issued since publicationDate Text affectedBS EN 13659:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13659 May 2015 ICS 91.060.50 Supersedes EN 13659:2004+A1:2008English Version Shutters and external venetian blinds - Performance

5、requirements including safety Fermetures et stores vnitiens extrieurs - Exigences de performance y compris la scurit Abschlsse auen und Auenjalousien - Leistungs- und Sicherheitsanforderungen This European Standard was approved by CEN on 16 February 2015. CEN members are bound to comply with the CEN

6、/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Cen

7、tre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as th

8、e official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Nether

9、lands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All righ

10、ts of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13659:2015 EBS EN 13659:2015EN 13659:2015 (E) Contents Page Foreword 5 Introduction .7 1 Scope 8 2 Normative references 8 3 Terms and definitions 10 4 Product characteristics 11 4.1 Resistance to

11、 wind loads . 11 4.2 Resistance of non retractable elements to pressure loads . 12 4.3 Resistance to snow load (roller shutters only) 12 4.3.1 General . 12 4.3.2 Determination of performance 13 4.3.3 Performance requirement 13 4.3.4 Expression of the results . 13 4.3.5 Classes of snow resistance . 1

12、3 4.4 Operating effort . 13 4.4.1 General . 13 4.4.2 Determination of performance 14 4.4.3 Performance requirement and operational effort classes 14 4.5 Operating mechanism HPV diagrams (“Human Pull Value”) 14 4.5.1 General . 14 4.5.2 Performances requirements 14 4.6 Resistance in case of misuse 16

13、4.6.1 General . 16 4.6.2 Determination of performance 18 4.6.3 Performance requirement 18 4.7 Edge loading (wing shutters only) 19 4.7.1 General . 19 4.7.2 Determination of performance 19 4.7.3 Performance requirement 19 4.8 Resistance of mechanisms holding the shutter in the extended position . 20

14、4.8.1 General . 20 4.8.2 Determination of performance 20 4.8.3 Performance requirement 21 4.9 Mechanical endurance (repeated operating cycles) . 22 4.9.1 General . 22 4.9.2 Determination of performance 22 4.9.3 Performance requirement 22 4.9.4 Classes of endurance . 23 4.10 Operation in frosty condi

15、tions 24 4.11 Impact resistance 24 4.11.1 General . 24 4.11.2 Determination of performance 24 4.11.3 Performance requirement 24 4.12 Prevention of access 24 4.12.1 General . 24 4.12.2 Retraction of the curtain 25 4.12.3 Resistance of the guide rail against splaying 25 4.12.4 Rigidity of the curtain

16、under the application of an horizontal force . 26 4.12.5 Perforation of a lath or of a panel . 27 4.12.6 Resistance of the bottom lath . 27 4.12.7 Installation of the shutter . 27 BS EN 13659:2015EN 13659:2015 (E) 3 4.12.8 Ability to dismantle from outside 28 4.12.9 Access to the installation means

17、from outside 28 4.12.10 Access to operating system from outside (including remote control) 28 4.12.11 Classification of reinforced shutters . 28 4.13 Safety in use 29 4.13.1 General . 29 4.13.2 Protection from potentially harmful parts . 29 4.13.3 Power operated shutters Injurious contact in operati

18、on . 29 4.13.4 Electrical hazards 30 4.14 Additional thermal resistance R 31 4.15 Total solar energy transmittance gtot. 31 4.16 Materials . 31 4.16.1 General . 31 4.16.2 Rigid plastic materials 32 4.16.3 Metals 33 4.16.4 Wood . 33 4.17 Dimensional tolerances 36 4.17.1 General . 36 4.17.2 Determinat

19、ion of performance . 36 4.17.3 Performance requirement . 36 4.18 Specific characteristics 36 4.18.1 Bullet resistance 36 4.18.2 Burglar resistance . 36 4.18.3 Explosion resistance . 37 4.18.4 Airborne sound insulation 37 5 Handling and storage 37 5.1 General . 37 5.2 Determination of performance . 3

20、7 5.3 Performance requirement . 37 6 Information for use 37 6.1 General . 37 6.2 Signal and warning devices . 37 6.3 Accompanying documents (in particular the instruction handbook) 37 6.3.1 General . 37 6.3.2 Instructions for handling, unpacking and installation 37 6.3.3 Instructions for use and mai

21、ntenance 38 6.4 Marking . 39 7 Assessment and verification of constancy of performance - AVCP 40 7.1 General . 40 7.2 Type Testing 40 7.2.1 General . 40 7.2.2 Test samples, testing and compliance criteria 41 7.2.3 Test reports 41 7.2.4 Shared other party results 41 7.2.5 Cascading determination of t

22、he product type results . 42 7.3 Factory Production Control (FPC) . 43 7.3.1 General . 43 7.3.2 Requirements . 43 7.3.3 Product specific requirements . 45 7.3.4 Procedure for modifications. 46 7.3.5 One-off products, pre-production products (e.g. prototypes) 46 8 Marking . 47 Annex A (informative) T

23、emperature effects . 48 Annex B (informative) Calculation of wind pressure exerted on a shutter Allocation of a class of wind resistance . 50 BS EN 13659:2015EN 13659:2015 (E) 4 Annex C (normative) List of significant machine hazards . 52 Annex D (informative) Example of calculation for the wind res

24、istance determination on fixed parts of shutters in retracted position 53 Annex E (informative) List of wood species 54 Annex F (informative) Time limits for the application of the finish regarding temporary moisture-repellent protections 58 Annex G (informative) Determination of the moisture-repell

25、ent value of a temporary protection 59 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation . 62 Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC . 68

26、Bibliography . 69 BS EN 13659:2015EN 13659:2015 (E) 5 Foreword This document (EN 13659:2015) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR. This European Standard shall be given the stat

27、us of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2015 and conflicting national standards shall be withdrawn at the latest by February 2017. Attention is drawn to the possibility that some of the elements of this document may be the su

28、bject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13659:2004+A1:2008. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and

29、 supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA and Annex ZB, which are integral parts of this document. This European Standard is a part of a series of standards dealing with blinds and shutters for buildings as defined in EN 1221

30、6. The major modifications to the previous edition are: 4.1 “Resistance to wind loads” has been modified and has been aligned with the revised version of EN 1932 “Test methods”; 4.2 “Resistance of non retractable elements to pressure loads” has been added to integrate requirements on the shutters an

31、d external venetian blinds in the retracted position; 4.8 “Resistance of mechanisms holding the shutter in the extended position” has been clarified and modified to be applicable to any type of shutters and external venetian blinds; 4.12 “Prevention of access” has been added; 4.14 “Additional therma

32、l resistance” has been clarified; 4.15 “Total solar energy transmittance” has been added; 4.16 “Materials” has been aligned with the new version of EN 13245-1 for plastics and requirements for metals have been clarified; 4.17 “Dimensional tolerances” has been modified for external venetian blinds; C

33、lause 7 “Assessment and verification of constancy of performance - AVCP” has been aligned with the European template; Annex B “Calculation of wind pressure exerted on a shutter Allocation of a class of wind resistance” has been modified to consider values of Eurocode 1; Annex C “List of significant

34、machine hazards” has been modified and EN ISO 12100 has been introduced; Annex D “Example of calculation for the wind resistance determination on fixed parts of shutters in retracted position” has been added; BS EN 13659:2015EN 13659:2015 (E) 6 Annex ZA has been modified to introduce a two mandated

35、characteristics: the total solar energy transmittance gtot, the additional thermal resistance R and revised in accordance with requirements of the CPR. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Europ

36、ean Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slov

37、enia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13659:2015EN 13659:2015 (E) 7 Introduction This document is a type C standard as stated in EN ISO 12100. The machinery concerned, i.e. power operated products, and the extent to which hazards, hazardous situations and hazardous e

38、vents are covered are indicated in the scope of this document. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been de

39、signed and built according to the provisions of this type C standard. BS EN 13659:2015EN 13659:2015 (E) 8 1 Scope This European Standard specifies the performance requirements for shutters and external venetian blinds intended to be fitted externally to buildings and other construction works. It dea

40、ls also with the significant hazards for assembly, transport, installation, operation and maintenance (see list of significant machine hazards in Annex C). It applies to all shutters and external venetian blinds whatever their use and nature of the materials used, as follows and defined in EN 12216:

41、 external venetian blind, roller shutter, wing shutter, Venetian shutter, flat-closing concertina shutter, concertina shutter or sliding panel shutter, with or without a system of projection. These products can be operated manually with or without compensating spring, or by means of electric motors

42、(power operated products). However, the durability and endurance of the autonomous supply for power operated shutters and external venetian blinds not connected to the mains supply are not covered. This European Standard deals also with all significant hazards, hazardous situations and events when s

43、hutters and external venetian blinds are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex D). This European Standard covers shutters and external venetian blinds mounted externally. In case such products are installed internally, they sh

44、ould fulfil all relevant safety requirements defined in EN 13120. The noise emission of power operated shutters and external venetian blinds is not considered to be a relevant hazard health and safety requirements. Therefore this European Standard does not contain any specific requirements on noise

45、health and safety objective. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced

46、document (including any amendments) applies. EN 204, Classification of thermoplastic wood adhesives for non-structural applications EN 1522, Windows, doors, shutters and blinds - Bullet resistance - Requirements and classification EN 1523, Windows, doors, shutters and blinds - Bullet resistance - Te

47、st method EN 1627, Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Requirements and classification EN 1628, Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under stat

48、ic loading EN 1629, Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under dynamic loading EN 1630, Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the

49、 determination of resistance to manual burglary attempts EN 1670, Building hardware - Corrosion resistance - Requirements and test methods EN 1932, External blinds and shutters - Resistance to wind loads - Method of testing and performance criteria EN 12045, Shutters and blinds power operated - Safety in use - Measurement of the transmitted force BS EN 13659:2015EN 13659:2015 (E) 9 EN 12194, Shutters, external and internal blinds - Misuse - Test methods EN 12216, Shutters, external blinds, internal blinds - Terminology, glossary and def