1、BRITISH STANDARD BS EN 13684:2004 Garden equipment Pedestrian controlled lawn aerators and scarifiers Safety ICS 65.060.70 +A3:2009National foreword This British Standard is the UK implementation of EN 13684:2004+A3:2009. It supersedes BS EN 13684:2004+A2:2009, which is withdrawn. The start and fini
2、sh of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“. The UK participation in its preparation was entrusted to Technical Committee AG
3、E/20, Powered lawn and garden equipment. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a Br
4、itish Standard cannot confer immunity from legal obligations. BS EN 13684:2004+A3:2009 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 11 October 2004 BSI 2010 Amendments/corrigenda issued since publication Date Comments 31 August 2009 Implem
5、entation of CEN amendment A2:2009 28 February 2010 Implementation of CEN amendment A3:2009 ISBN 978 0 580 70653 0 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13684:2004+A3 December 2009 ICS 65.060.70 Supersedes EN 13684:2004+A2:2009 English Version Garden equipment - Pedestrian controlled l
6、awn aerators and scarifiers - Safety Matriel de jardinage - Arateurs et scarificateurs conducteur pied - Scurit Gartengerte - Handgefhrte Rasen-Bodenbelfter und Vertikutierer - Sicherheit This European Standard was approved by CEN on 1 April 2004 and includes Amendment 2 approved by CEN on 6 June 20
7、09 and Amendment 3 approved by CEN on 20 November 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
8、 concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into
9、its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
10、Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2
11、009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13684:2004+A3:2009: EEN 13684:2004+A3:2009 (E) 2 Contents page Foreword . 4 Introduction . 5 1 Scope 6 2 Normative references . 6 3 Terms and definitions . 7 4 List of significant
12、 hazards 9 5 Safety requirements and/or protective measures . 12 5.1 General . 12 5.2 %Power driven components and the tines& . 12 5.3 Guard attachment . 12 5.4 Hot exhaust surfaces 13 5.4.1 General . 13 5.4.2 Test equipment and method of test 13 5.4.3 Test acceptance 13 5.5 Protection from exhaust
13、fumes . 13 5.6 Pressurised components . 13 5.7 Liquid spillage . 14 5.8 Controls . 14 5.8.1 General . 14 5.8.2 Identification of controls 14 5.8.3 Operator presence control . 15 5.8.4 Traction drive 15 5.9 Electrical requirements 15 5.9.1 General . 15 5.9.2 Low voltage battery circuits (not includin
14、g magneto grounding circuits) . 15 5.9.3 Terminals and uninsulated electrical parts 16 5.10 Stopping and starting . 16 5.10.1 Engine 16 5.10.2 %Aerators Tines& . 16 5.11 Braking requirements . 17 5.11.1 General . 17 5.11.2 Service brake . 17 5.11.3 Parking brake 17 5.12 Handles 17 5.12.1 Constructio
15、n 17 5.12.2 Foot probe test 18 5.13 Thrown object hazard . 18 5.13.1 General . 18 5.13.2 Thrown object test 18 5.13.3 Test results 19 5.13.4 Test acceptance (pass/fail criteria) . 19 5.13.5 Additional testing 19 5.14 Strength of tines and tine mountings . 19 5.15 General construction Guarding and sh
16、ielding 20 5.16 Noise. 21 5.16.1 Noise reduction as a safety requirement 21 5.16.2 Verification of requirements on noise Noise measurement 22 5.17 Vibration . 22 5.17.1 Reduction by design and protective measures . 22 5.17.2 Reduction by information. 22 BS EN 13684:2004+A3:2009EN 13684:2004+A3:2009
17、(E) 3 5.17.3 Vibration measurement 22 6 Information for use . 23 6.1 Instruction for use . 23 6.2 Marking 24 6.2.1 Minimum marking . 24 6.2.2 Warnings 24 6.2.3 Marking durability . 25 6.2.4 Test . 25 Annex A (normative) %Safety signs and symbols& . 34 A.1 General . 34 A.2 %Safety signs and symbols&
18、. 34 Annex B (informative) Safety instructions . 36 B.1 General . 36 B.2 Safe operation practices. . 36 B.2.1 Training 36 B.2.2 Preparation 36 B.2.3 Operation . 37 B.2.4 Maintenance and storage . 38 Annex C (normative) Noise test code Engineering method (grade 2) . 39 C.1 Scope 39 C.2 A-weighted sou
19、nd power level determination . 39 C.3 A-weighted emission sound pressure level measurement 41 C.4 Requirements for test floor 41 C.4.1 Artificial surface 41 C.4.2 Natural grass . 42 C.5 Installation, mounting and operating conditions 42 C.6 Measurement uncertainties and declaration of noise emission
20、 values 43 C.7 Information to be recorded and reported . 43 Annex D (informative) Example of a material and construction fulfilling the requirements for an artificial surface 44 D.1 Material . 44 D.2 Construction 44 Annex E (normative) Vibration . 46 E.1 Quantities to be measured . 46 E.2 Instrument
21、ation . 46 E.2.1 General . 46 E.2.2 Fastening of transducer . 46 E.2.3 Calibration . 46 E.3 Measurement direction and measurement location 46 E.3.1 Measurement direction . 46 E.3.2 Measurement location 47 E.4 Determination of working procedure 47 E.5 Measurement procedure 47 E.6 Determination of the
22、 measurement result 48 Annex ZA (informative) #Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC$ . 49 Annex ZB (informative) #Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC$ . 50 Bibliography .
23、51 BS EN 13684:2004+A3:2009EN 13684:2004+A3:2009 (E) 4 Foreword This document (EN 13684:2004+A3:2009) has been prepared by Technical Committee CEN/TC 144 “Tractors and machinery for agriculture and forestry”, the secretariat of which is held by AFNOR. This European Standard shall be given the status
24、 of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at the latest by June 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of
25、patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 2, approved by CEN on 2009-06-06 and Amendment 3, approved by CEN on 2009-11-20. This document supersedes %EN 13684:2004+A2:2009&. The start and finish of t
26、ext introduced or altered by amendment is indicated in the text by tags #$ and % &. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of %EU Directive(s)&. #For relationship with %EU Di
27、rective(s)&, see informative Annexes ZA and ZB, which are integral parts of this document.$ Annexes A, C and E are normative. Annexes B and D are informative. This document includes a Bibliography. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followi
28、ng countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Sloven
29、ia, Spain, Sweden, Switzerland and United Kingdom. BS EN 13684:2004+A3:2009EN 13684:2004+A3:2009 (E) 5 Introduction This document is a type C standard as stated in EN 1070. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope
30、 of this document. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions
31、 of this type C standard. BS EN 13684:2004+A3:2009EN 13684:2004+A3:2009 (E) 6 1 Scope This European Standard specifies safety requirements and their verification for the design and construction of pedestrian controlled integrally powered lawn aerators and scarifiers which are designed for re-generat
32、ing lawns by, for instance, combing out grass, thatch and moss or cutting vertically into the lawn face using tines which rotate about a horizontal axis. It describes methods of elimination or reduction of hazards arising from their use. In addition, it specifies the type of information to be provid
33、ed by the manufacturer on safe working practices. Throughout this standard, the term “machine” applies to those machines known as aerators, scarifiers, corers, lawn rakes or grass rakes. This standard does not apply to aerators/scarifiers made from a machine falling within the scope of EN 709:1997 w
34、hen fitted with an aerating/scarifying implement, non-powered aerators, vertical axis aerators or those aerators which cut into the soil by means of a reciprocating motion or by water pressure. The electrical aspects of mains operated machines are covered by EN 60335-1. The safety aspects of batteri
35、es other than batteries for starting the engine and the electrical safety aspects of battery powered lawn aerators and scarifiers are not covered by this standard. This standard deals with all significant hazards, hazardous situations and events relevant to scarifiers and aerators, when they are use
36、d as intended and under the conditions foreseen by the manufacturer (see Clause 4). Environmental hazards and EMC have not been considered in this standard. This document is not applicable to aerators/scarifiers which are manufactured before the date of publication of this document by CEN. 2 Normati
37、ve references %The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.& EN 294:1992, Safety of machinery
38、Safety distance to prevent danger zones being reached by the upper limbs EN 954-1:1996, Safety of machinery Safety related parts of control systems Part 1: General principles for design EN 982:1996, Safety of machinery Safety requirements for fluid power systems and their components Hydraulics EN 10
39、33:1995, Hand-arm vibration Laboratory measurement of vibration at the grip surface of hand-guided machinery General EN 1070, Safety of machinery Terminology EN 60335-1:2002, Household and similar electrical appliances Part 1: General requirements (IEC 60335-1:2001, modified) EN ISO 354:2003, Acoust
40、ics Measurement of sound absorption in a reverberation room (ISO 354:2003) EN ISO 3744:1995, Acoustics Determination of sound power levels of noise sources using sound pressure Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994) BS EN 13684:2004+A3:2009EN 13684:20
41、04+A3:2009 (E) 7 EN ISO 11201:1995, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995) EN ISO 11688-1:1998, Acoust
42、ics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning (ISO/TR 11688-1:1995) EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-2:2003, Safety of machiner
43、y Basic concepts, general principles for design Part 2: Technical principles (ISO 12100-2:2003) ISO 3767-1:1998, Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other displays Part 1: Common symbols ISO 3767-3:1995, Tractors, mach
44、inery for agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other displays Part 3: Symbols for powered lawn and garden equipment ISO 3767-4:1993, Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Symbols for operator contr
45、ols and other displays Part 4: Symbols for forestry machinery ISO 3864-1:2002, Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs in workplaces and public areas ISO 11684:1995, Tractors, machinery for agriculture and forestry, powered lawn and garden equipme
46、nt Safety signs and hazard pictorials General principles 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN 1070 and the following apply. 3.1 braking system combination of one or more brakes and the related means of operation and control 3.2 cat
47、cher part or combination of parts which provides a means for collecting grass, thatch, moss or other debris 3.3 control means or device which will control the operation of the machine or any specific operating function thereof 3.4 working position any depth setting of the tines designated by the man
48、ufacturer 3.5 discharge chute extension of the tine enclosure from the discharge opening, generally used to control the discharge of material from the tines BS EN 13684:2004+A3:2009EN 13684:2004+A3:2009 (E) 8 3.6 discharge opening gap or opening in the tine enclosure through which grass, thatch, moss and other debris may be discharged 3.7 front discharge denote
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1