1、BRITISH STANDARD BS EN 13796-2:2005 Safety requirements for cableway installations designed to carry persons Carriers Part 2: Slipping resistance test for grips The European Standard EN 13796-2:2005 has the status of a British Standard ICS 45.100 BS EN 13796-2:2005 This British Standard was publishe
2、d under the authority of the Standards Policy and Strategy Committee on 27 June 2005 BSI 27 June 2005 ISBN 0 580 46154 8 National foreword This British Standard is the official English language version of EN 13796-2:2005. The UK participation in its preparation was entrusted to Technical Committee M
3、CE/20, Aerial Ropeways, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the B
4、SI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for
5、 its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK inte
6、rests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 8, an inside back cover and a back cover. The BSI copyright notice displayed in this doc
7、ument indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13796-2 May 2005 ICS 45.100 English version Safety requirements for cableway installations designed to carry persons - Carriers - Part 2:
8、Slipping resistance test for grips Prescriptions de scurit pour les installations cbles transportant des personnes - Vhicules - Partie 2 : Essai de rsistance au glissement des attaches Sicherheitsanforderungen fr Seilbahnen und Schleppaufzge fr den Personenverkehr - Fahrzeuge - Teil 2: Klemmenabzieh
9、versuch This European Standard was approved by CEN on 17 April 2005. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographic
10、al references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN m
11、ember into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, L
12、ithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN
13、All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13796-2:2005: EEN 13796-2:2005 (E) 2 Contents Page Foreword .3 1 Scope5 2 Normative references.5 3 Terms and definitions 5 4 Symbols and abbreviations .5 5 General6 6 Parts to be tested .
14、6 7 Information to be provided by the manufacturer 6 8 Examination prior to the test .6 9 Test requirements 6 10 Slipping resistance force .7 11 Conclusion of the test7 11.1 Evaluation of test results .7 11.2 Test report 7 Annex ZA (informative) Relationship between this European Standard and the Es
15、sential Requirements of EU Directive 2000/9/EC relating to cableway installations designed to carry persons .8EN 13796-2:2005 (E) 3 Foreword This European Standard (EN 13796-2:2005) has been prepared by Technical Committee CEN/TC 242 “Safety requirements for passenger transportation by rope”, the se
16、cretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2005, and conflicting national standards shall be withdrawn at the latest by November 2005. This Europ
17、ean Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the EU Directive For relationship with the EU Directive, see informative annex ZA, which is an integral part of this European Standar
18、d. EN 13796 comprises the following parts under the general title Safety requirements for cableway installations designed to carry persons Carriers: Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow- hangers Part 2: Slipping resistance test for grip
19、s Part 3: Fatigue testing This European Standard forms part of the standards programme approved by the CEN Technical Board on safety requirements for cableway installations designed to carry persons. This programme comprises the following standards: 1) Safety requirements for cableway installations
20、designed to carry persons - Terminology 2) Safety requirements for cableway installations designed to carry persons - General requirements 3) Safety requirements for cableway installations designed to carry persons - Calculations 4) Safety requirements for cableway installations designed to carry pe
21、rsons - Ropes 5) Safety requirements for cableway installations designed to carry persons - Tensioning devices 6) Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment 7) Safety requirements for cableway installations designed to carr
22、y persons - Carriers 8) Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems 9) Safety requirements for cableway installations designed to carry persons - Civil engineering works 10) Safety requirements for cableway installation
23、s designed to carry persons Pre-commissioning inspection, maintenance and operational inspection and checks 11) Safety requirements for cableway installations designed to carry persons Recovery and evacuation EN 13796-2:2005 (E) 4 12) Safety requirements for cableway installations designed to carry
24、persons - Operation 13) Safety requirements for cableway installations designed to carry persons - Quality assurance Together these form a series of standards regarding design, manufacture, construction, maintenance and operation of all cableway installations designed to carry persons. According to
25、the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxe
26、mbourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 13796-2:2005 (E) 5 1 Scope This European Standard specifies the safety requirements applicable to carriers for cableway installations designed to carry persons. It is appli
27、cable to the various types of installations and takes into account their environment. This European Standard describes the requirements to be met when testing the slipping resistance of grips clamped on the haulage or carrying hauling rope of carriers of monocable or bicable aerial ropeways with fix
28、ed or detachable grips, covered by 7.4 of Part 1 of this standard; on the towing rope of ski-tows with fixed grips, covered by 7.6.2 of Part 1 of this standard. It does not apply to installations for the transportation of goods nor to inclined lifts. 2 Normative references The following referenced d
29、ocuments are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1907:2005, Safety requirements for cableway installations desig
30、ned to carry persons Terminology EN 13796-1:2005, Safety requirements for cableway installations designed to carry persons Carriers Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers EN ISO/IEC 17025, General requirements for the competence o
31、f testing and calibration laboratories (ISO/IEC 17025:1999) . 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN 1907:2005 and EN 13796-1:2005 apply. 4 Symbols and abbreviations F labSlipping resistance force determined experimentally in the lab
32、oratory (kN) F maxMaximum slipping resistance force (kN) F theo Calculated slipping resistance force (kN) I gtotTotal slipping length (m) EN 13796-2:2005 (E) 6 5 General The corresponding risk factors and safety measures to be taken into consideration in this standard appear in EN 13796-1. The test
33、shall be carried out by a laboratory certified according to EN ISO/IEC 17025. The test will make it possible to validate the field of use of the grip proposed by the manufacturer. 6 Parts to be tested The geometry and the materials of the test piece shall be identical to the series-produced componen
34、ts. Their production methods shall be equivalent. In particular, the test piece shall be galvanized if it is planned that the series-produced component will be. 7 Information to be provided by the manufacturer The manufacturer shall supply the following information and documents to the test laborato
35、ry: general description of the grip; production drawings of the grip; descriptions and explanations required to understand the above-mentioned drawings and the mode of operation of the grip; field of use of the grip, including F theo ; declaration of conformity certifying that the grip supplied for
36、the test corresponds to the operating manual specified in EN 13796-1. The test piece shall be identified by a mark. 8 Examination prior to the test The test laboratory shall verify by a visual examination that the test piece complies with the documentation supplied by the manufacturer. The procedure
37、 and the result of the examination shall be included in the test report. 9 Test requirements The test consists of subjecting a grip clamped on a rope to an increasing tensile force until it starts to slip, while recording the change in its resistance to slipping. whatever the field of use of the gri
38、p, the test shall be carried out on a parallel-lay galvanized rope. If the field of use of the grip specifies several nominal machining diameters for the jaws corresponding to as many nominal rope diameters, the test shall be carried out only on the largest diameter; EN 13796-2:2005 (E) 7 the rope s
39、hall be subjected to a tensile force corresponding to 1/6 of its breaking load; the grip shall be attached according to the conditions specified by the manufacturer; the equipment used to transmit the force shall allow controlled and gradual application; the equipment for measuring the slipping resi
40、stance force shall enable a continuous permanent record to be made of the applied force as a function of time; the tensile force on the grip shall be applied so that the resultant of the slipping force coincides with the axis of the rope; the force on the grip shall be applied progressively until sl
41、ipping starts and shall be maintained to cause a minimum slippage of at least 5 mm; the test shall be carried out 10 times. The total slipping length I gtotshall be at least: I gtot rope strands the of in number strands of pitch(m) ( 1 ) These tests may be carried out successively without opening th
42、e grip. 10 Slipping resistance force The slipping resistance force F labis equal to the mean of the maximum values F maxobtained in the 10 tests: F lab= 10 max F( 2 ) 11 Conclusion of the test 11.1 Evaluation of test results The test is regarded as satisfactory if F labis greater than F theoand no m
43、ovement of any wire making up the test rope is observed in the zone affected by the slipping of the grip. 11.2 Test report The procedures and results shall be included in a test report. The test report shall meet the requirements of EN ISO/IEC 17025. EN 13796-2:2005 (E) 8 Annex ZA (informative) Rela
44、tionship between this European Standard and the Essential Requirements of EU Directive 2000/9/EC relating to cableway installations designed to carry persons This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to pr
45、ovide a means of conforming to Essential Requirements of the New Approach Directive 2000/9/EC relating to cableway installations designed to carry persons. Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national stan
46、dard in at least one Member State, compliance with the clauses of this standard given in table ZA confers, within the limits of the scope of this standard, a presumption of conformity with the corresponding Essential Requirements of that Directive and associated EFTA regulations. Table ZA Correspond
47、ence between this European Standard and Directive 2000/9/EC relating to cableway installations designed to carry persons Clause(s)/sub-clause(s) of this EN Essential Requirements (ERs) of Directive 2000/9/EC Qualifying remarks/Notes 5 5.2 6 5.2 7 5.2 8 5.2 9 5.2 10 5.2 11 5.2 WARNING Other requireme
48、nts and other EU Directives may be applicable to the product(s) falling within the scope of this standard. blankBS EN 13796-2:2005 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents
49、the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity w
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1