1、BRITISH STANDARDBS EN 13845:2005Resilient floor coverings Polyvinyl chloride floor coverings with particle based enhanced slip resistance SpecificationThe European Standard EN 13845:2005 has the status of a British StandardICS 97.150g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g5
2、1g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 13845:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 27 September 2005 BSI 27 September 2005ISBN 0
3、 580 46677 9National forewordThis British Standard is the official English language version of EN 13845:2005.The UK participation in its preparation was entrusted to Technical Committee PRI/60, Resilient floor coverings, which has the responsibility to:A list of organizations represented on this com
4、mittee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “S
5、earch” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard does not of itself confer immunity from legal o
6、bligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.Summary of
7、 pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 19 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARDNORME EUROPE
8、NNEEUROPISCHE NORMEN 13845August 2005ICS 97.150English VersionResilient floor coverings - Polyvinyl chloride floor coverings withparticle based enhanced slip resistance - SpecificationRevtements de sol rsilients - Revtements de sol enchlorure de polyvinyle rsistance accrue au glissement -Spcificatio
9、nElastische Bodenbelge - Polyvinylchlorid-Bodenbelge mitpartikelbasiertem erhhten Gleitwiderstand - SpezifikationThis European Standard was approved by CEN on 27 June 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Europea
10、nStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, Fren
11、ch, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic
12、, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUR
13、OPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13845:2005: EEN 13845:2005 (E) 2 Contents Page Foreword 3 Introduction . 4 1 Scope. 5 2 Normative
14、references. 5 3 Terms and definitions 6 4 Requirements 6 4.1 General requirements. 6 4.2 Classification requirements. 6 5 Marking 10 Annex A (informative) Optional properties 11 Annex B (informative) Additional methods of test 12 Annex C (normative) Determination of slip resistance 13 C.1 Scope. 13
15、C.2 Referenced documents 13 C.3 Principle 13 C.4 Operator 13 C.5 Test footwear 14 C.6 Apparatus 14 C.7 Test fluid . 14 C.8 Test piece 14 C.9 Procedure 15 C.10 Evaluation . 15 C.11 Calibration. 15 C.12 Test report. 15 Annex D (normative) Determination of wear resistance. 16 D.1 Scope. 16 D.2 Principl
16、e 16 D.3 Apparatus 16 D.4 Test specimen. 16 D.5 Conditioning . 17 D.6 Procedure 17 D.7 Expression of result . 17 D.8 Test report. 18 Bibliography 19 EN 13845:2005 (E) 3 Foreword This European Standard (EN 13845:2005) has been prepared by Technical Committee CEN/TC 134 “Resilient, textile and laminat
17、e floor coverings”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2006, and conflicting national standards shall be withdrawn at the latest by F
18、ebruary 2006. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Ita
19、ly, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 13845:2005 (E) 4 Introduction The ramp test is a means of assessing the slipperiness of floors under wet conditions. Ramps of different designs exist
20、 and CEN/TC 134 therefore decided not to standardise on a ramp design. The aim of this European Standard is to establish and standardise the principle of testing and specify the parameters to be followed when designing a ramp device and when testing with it. EN 13845:2005 (E) 5 1 Scope This European
21、 Standard specifies the characteristics of floor coverings with sustainable enhanced slip resistant characteristics under specified conditions based on polyvinyl chloride and modifications thereof, supplied in either tile or roll form. To encourage the consumer to make an informed choice, this Europ
22、ean Standard includes a classification system (see EN 685) based on intensity of use, which shows where resilient floor coverings should give satisfactory service. In addition, this European Standard details the requirements for the information to be included on the packaging labels. The slip measur
23、ements are made in a laboratory on ex-factory floor covering surfaces only. The method described is suitable for testing on wet surfaces. 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition
24、cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 425, Resilient and laminate floor coverings Castor chair test EN 426, Resilient floor coverings Determination of width, length, straightness and flatness of sheet material EN 4
25、27, Resilient floor coverings Determination of the side length, squareness and straightness of tiles EN 428:1993, Resilient floor coverings Determination of overall thickness EN 430:1994, Resilient floor coverings Determination of mass per unit area EN 433:1994, Resilient floor coverings Determinati
26、on of residual indentation after static loading EN 434, Resilient floor coverings Determination of dimensional stability and curling after exposure to heat EN 435:1994, Resilient floor coverings Determination of flexibility EN 660-2, Resilient floor coverings Determination of wear resistance Frick-T
27、aber test EN 684, Resilient floor coverings Determination of seam strength EN 685, Resilient, textile and laminate floor coverings - Classification EN 12466:1998, Resilient floor coverings Vocabulary ISO 105-B02:1994, Textiles Tests for colour fastness Part B02: Colour fastness to artificial light:
28、Xenon arc fading lamp test EN 13845:2005 (E) 6 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN 12466:1998 and the following apply. 3.1 enhanced slip resistance capacity of a floor covering to counteract slipping under wet conditions 3.2 floor
29、 covering with particle based enhanced slip resistance floor covering with a wear surface modified to provide sustainable enhanced slip resisting properties under specified conditions. The floor covering can have other solid layers which may differ in composition and/or design and may contain a rein
30、forcement. This type of floor covering contains various aggregate or identifiable particles of different hardness to the surface layer such as cork which are to be present in the surface layer throughout the normal wear life of the product. They do not necessarily form a distinctive, measurable surf
31、ace layer and have specific tests designed to measure the performance 3.3 polyvinyl chloride floor covering floor covering with surface layers produced using polyvinyl chloride and modifications thereof as binder 3.4 aggregate natural or synthetically coloured mineral granules, such as quartz and al
32、uminium trioxide, that can be used to provide and maintain the surface roughness of a resilient floor covering 3.5 wet-loaded area area in which the floor coverings are generally wet and walked on. These are in buildings used by the public and for industrial purposes, such as for example in baths, c
33、hanging rooms, washrooms, toilets, sluice rooms, kitchens, etc. 3.6 barefoot area area where the floor is primarily intended for barefoot use such as in shower trays and pool surrounds 3.7 footwear area area where the floor is intended for use with shoes and other types of footwear 4 Requirements 4.
34、1 General requirements Floor coverings described in this European Standard shall comply with the appropriate general requirements specified in Table 1, when tested in accordance with the methods given therein. 4.2 Classification requirements Floor coverings described in this European Standard shall
35、be classified as suitable for different levels of use in accordance with the performance requirements specified in Table 2, when tested with the methods given therein. Classification shall conform to the scheme established in EN 685. EN 13845:2005 (E) 7 Table 1 General requirements Characteristic Re
36、quirement Test method Roll form: EN 426 length (m) width (mm) Not less than the nominal values Tiles: EN 427side length (mm) Deviation 0,13 % of nominal length up to 0,5 mm maximum squareness and straightness for side length (mm) Deviation allowed at any point 400 mm 0,25 400 mm 0,35 400 mm (intende
37、d for welding) 0,50 Nominal value + 13 % Total mass per unit area (average) (g/m2) 10 % EN 430 Overall thickness: (mm) Nominal + 0,13 Average - 0,10 Individual results average value 0,15 EN 428 Class ESf (footwear) 20 Slip classification (Degrees) Class ESb (barefoot) 15 Annex C Residual indentation
38、 (average) (mm) 0,1 EN 433 Dimensional stability: (%) Variation in each direction EN 434 sheets and tiles (intended for welding) 0,4 % tiles (intended for dry-joint laying) 0,25 % Curling: (mm) Sheets and tiles to be bonded (See footnoteote aSheets and tiles un-bonded 2 Flexibility: Test using a 20
39、mm mandrel. EN 435 Method A Colour fastness to artificial light 6 minimum EN ISO105-B02:1994 Method 3 b aThe test need not be carried out for fully bonded and welded materials. If supplied in tile form and dry joint laid the material shall meet the requirement (2 mm). bExpose a full size test sample
40、. Store a further test sample in the dark, which will constitute the reference standard for assessment of change in colour. EN 13845:2005 (E) 8 Table 2 Classification requirements for level of use Class Symbol Level of use Minimum overall thickness aNominal value, mm Effect of Wear resistance b cEff
41、ect of a castor chair Seam strength N/50 mm 21 21domestic moderate 1,0 22 22+ 22domestic general 1,5 20 000 cycles No Requirement No Requirement 23 23domestic heavy 1,5 31 31commercial moderate When welded in accordance with the manufacturers 32 33commercial general 2,0 30 000 cycles instructionsave
42、rage value 240. Individual values 41 41light industrial moderate If tested for verification, no disturbance to the surface other than slight change due to flatter appearance and no delamination shall occur. values 180 EN 13845:2005 (E)9 Table 2 (continued)ClassSymbolLevelofuseMinimum overallthicknes
43、saNominal value,mmEffect of Wearresistanceb cEffect of acastorchairSeam strength N/50mm3333commercial heavy2,0 40000 cyclesWhenweldedinaccordancewith themanufacturers4242lightindustrialgeneral instructionsaverage value240. Individualvalues3434commercial very heavy 2,0 50000 cyclesvalues1804343lighti
44、ndustrialheavyTest methodEN428 AnnexDEN425EN684aThe averagevalue shallbe the nominal value 10,013,0+mm. Noindividual value shall varymore than 0,15 mmfromthe averagevalue.bAftertestingto therequirednumber of cyclesthereduction inidentifiableparticles shouldbe 10%.cFloorcoverings for barefootuseonlyn
45、eed not betestedand are automaticallyapplieda classification21/31. EN 13845:2005 (E) 10 5 Marking Floor coverings covered by this standard and/or their packaging shall bear the following marking: a) number and date of this European Standard, i.e. EN : 13845:2005 b) manufacturers or suppliers identif
46、ication; c) product name; d) colour/pattern, and batch and roll number if applicable; e) classes/symbols appropriate for the product; f) for rolls: the length, width and thickness; g) for tiles: the dimensions of a tile and the area in square metres contained in a package; h) for rolls: a statement
47、that the material shall be fully bonded to the subfloor; i) slip resistance classification. EN 13845:2005 (E) 11 Annex A (informative) Optional properties Where the following properties are requested for specific applications, the floor covering should be tested in accordance with the appropriate me
48、thods. electrical resistance (EN 1081); electrostatic propensity (EN 1815); effect of stains (EN 423); heavy swivel castor (EN 1818) EN 13845:2005 (E) 12 Annex B (informative) Additional methods of test The following test methods are also available for this type of product but do not form part of th
49、e specification: effect of simulated movement of a furniture leg (EN 424); peel resistance (EN 431); shear force (EN 432); spreading of water (EN 661); curling on exposure to moisture (EN 662); conventional pattern depth (EN 663); volatile loss (EN 664); exudation of plasticizers (EN 665); gelling (EN 666); mass/unit area of a reinforcement or backing (EN 718). EN 13845:2005 (E) 13 Annex C (normative) Determination of slip resistance
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1