1、BSI Standards PublicationBS EN 13869:2016Lighters Child safetyrequirements for lighters Safety requirements and testmethodsBS EN 13869:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13869:2016.It supersedes BS EN 13869:2002+A1:2011 which is withdrawn.The U
2、K participation in its preparation was entrusted to TechnicalCommittee CW/32, Matches and lighters.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are respon
3、sible for its correctapplication. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 88368 2ICS 97.180Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Poli
4、cy and Strategy Committee on 30 April 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 13869:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13869 April 2016 ICS 97.180 Supersedes EN 13869:2002+A1:2011English Version Lighters - Child safety requirements f
5、or lighters - Safety requirements and test methods Briquets - Exigences de scurit enfants pour les briquets - Exigences de scurit et mthodes dessai Feuerzeuge - Anforderungen an die Kindersicherheit von Feuerzeugen - Sicherheitsanforderungen und Prfverfahren This European Standard was approved by CE
6、N on 4 February 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standard
7、s may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notif
8、ied to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Ice
9、land, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Manag
10、ement Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13869:2016 EBS EN 13869:2016EN 13869:2016 (E) 2 Contents Page European foreword . 4 Introduction 5 1 Scope 6 2 Normative reference
11、s 6 3 Terms and definitions . 6 4 Safety requirements . 8 4.1 General 8 4.2 EN ISO 9994 . 8 4.3 Non-child-appealing requirement 8 4.4 Other requirements . 8 4.5 Child test panel requirements, mechanical and geometric requirements . 9 4.5.1 General 9 4.5.2 Child panel test requirements 9 4.5.3 Mechan
12、ical and geometric requirements . 12 5 Test method for child panel . 12 5.1 General . 12 5.2 Method of test 12 5.3 Child test panel 12 5.4 Test sites, environment and testers 13 5.4.1 Test sites 13 5.4.2 Test environment . 13 5.4.3 Testers 14 5.5 Surrogate lighters 14 5.6 Encouragement . 15 5.7 Chil
13、dren who refuse to participate 15 5.8 Test procedure 16 5.9 Data collection and recording . 17 6 Test method for measuring operating button force 18 6.1 General . 18 6.2 General test conditions 18 6.3 Test rig and probe 18 6.4 Test method . 19 7 Method for measuring the nominal surface area of the o
14、perating button 20 7.1 General . 20 7.2 Method . 20 8 Test report 20 8.1 General . 20 8.2 Test report for child test panel . 21 8.3 Test report for mechanical and geometrical tests . 21 9 Compliance . 22 9.1 General . 22 9.2 Declaration of compliance 22 BS EN 13869:2016EN 13869:2016 (E) 3 9.3 Suppor
15、ting documentation for compliance 22 10 Product marking . 22 Annex A (normative) Age and gender distribution . 23 Bibliography . 26 BS EN 13869:2016EN 13869:2016 (E) 4 European foreword This document (EN 13869:2016) has been prepared by Technical Committee CEN/TC 355 “Project Committee - Lighters”,
16、the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2016, and conflicting national standards shall be withdrawn at the latest by October 2016. Attent
17、ion is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13869:2002+A1:2011. This document has been prepared under a mand
18、ate given to CEN by the European Commission and the European Free Trade Association. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Re
19、public, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS
20、 EN 13869:2016EN 13869:2016 (E) 5 Introduction This European Standard is based on US consumer product safety standard for cigarette lighters, given in 16 CFR, Chapter II, Part 1210 “Safety standard for cigarette lighters” of 12 July 1993. Certain mechanical test methods have been introduced as an al
21、ternative to the Child Test Panel for some types of ignition mechanism. It is recognized that assessing lighters with child test panels can be expensive, can go against ethical principles, can take a considerable time and can lead to problems with enforcement. Under a mandate from the European Commi
22、ssion to CEN, it was therefore necessary to devise at least equally effective and reliable but less onerous alternatives for verifying the child-resistance of lighters. It should be noted that the alternative mechanical tests are not mandatory and that the child test panel assessment may still be ca
23、rried out. The mechanical test methods have been based upon the findings and recommendations from a study on child resistance requirements for cigarette lighters that was commissioned in 2011 and undertaken between November 2011 and April 2013. This report has been accepted by the European Commissio
24、n. It has not been possible to define technical parameters for all child-resistant mechanisms in use and only some types of ignition mechanisms are within the scope of the mechanical tests. It is possible that other types of ignition mechanisms (for example sliders and flint mechanisms) might be add
25、ressed at a later date. An alternative to the full child panel test method, based on the sequential method, has also been introduced. Life time has been included in the mechanical test method. No concerns have been raised about the validity of the child panel test but it is anticipated that the chil
26、d panel test could be reviewed in the future to harmonize the test methods of the life time of the child resistance of the lighter. BS EN 13869:2016EN 13869:2016 (E) 6 1 Scope This European Standard specifies child safety requirements for lighters. This European Standard does not apply to matches or
27、 any other lighting device intended primarily for igniting materials other than smoking materials, such as fuel for fireplaces, or for charcoal, or gas-fired grills. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable
28、 for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 9994, Lighters Safety specification (ISO 9994) EN ISO/IEC 17025, General requirements for the competence of tes
29、ting and calibration laboratories (ISO/IEC 17025) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 lighter manually operated flame-producing device employing a fuel, including butane or liquid fuel, normally used for deliberately igniting in p
30、articular cigarettes, cigars and pipes, and which may foreseeably be used to ignite materials such as paper and wicks of candles and lanterns, manufactured with an integral supply of fuel, whether intended to be refuelled or not Note 1 to entry: A price threshold for lighters, whether they are refil
31、lable or not, is applied in countries outside the European Union where child-resistance requirements are in force (US, Canada, Australia, New Zealand) of a customs valuation or ex-factory price under US $ 2,25; this corresponds with the threshold of EURO 2,00 initially defined in the standard EN 138
32、69:2002. 3.2 refillable repairable lighter refillable lighters for which producers provide on request to the competent authorities the necessary documentation substantiating that the lighters are designed, manufactured and placed on the market such as to ensure a continual expected safe use over a l
33、ifetime of at least five years, subject to repair, and which fulfil in particular all of the following: a written guarantee of at least two years for each lighter, in accordance with Directive 1999/44/EC Article 6 of the European Parliament and of the Council; this guarantee is in addition to the co
34、nsumers rights granted under Article 3 thereof; the practical possibility for the lighter to be repaired and safely refilled over the entire lifetime, including in particular a repairable ignition mechanism; parts that are not consumable, but are likely to wear out or fail in continual use after the
35、 guarantee period, are accessible for replacement or repair under the producers responsibility by an authorized or specialized after-sales service centre based in the European Union BS EN 13869:2016EN 13869:2016 (E) 7 Note 1 to entry: The above mentioned criteria relate to the so-called luxury and s
36、emi-luxury lighters which are also characterized by a low degree of substitutability with other lighters and an individual consumer packaging. 3.3 child-appealing lighter lighter, including any holder which can be incorporated later or any attachment which can be fixed later, that resembles by any m
37、eans to another object commonly recognized as appealing to or intended for use by children younger than 51 months, or has entertaining audio effects or animated effects Note 1 to entry: This includes, but is not limited to, lighters or holders that are clearly intended to hold lighters, the shape of
38、 which resembles cartoon characters, toys, guns, watches, telephones, musical instruments, vehicles, human body or parts of the human body, animals, food or beverages, or that play musical notes, or have flashing lights or moving objects or other entertaining features. This excludes lighters that ar
39、e printed or decorated with logos, labels, decals, artwork or heat shrinkable sleeves. 3.4 successful operation one signal of any duration from a surrogate lighter within either of the two 5 min test periods specified in 5.8 3.5 producer either: the manufacturer of the product when established in th
40、e European Union, any other organization presenting itself as the manufacturer by affixing to the product its name, trade mark or other distinctive mark, or the organization that reconditions the product; or the manufacturers representative when the manufacturer is not established in the European Un
41、ion or, if there is no representative established in the European Union, the importer of the product into the European Union; or other professionals in the supply chain insofar as their activities may affect the safety properties of a product 3.6 surrogate lighter device that: approximates to the ap
42、pearance, size, shape and weight of, and is identical in all other factors that affect child resistance including operation (e.g. force(s) and displacement(s), within reasonable manufacturing tolerances, to a lighter intended for use by consumers; has no fuel; does not produce a flame; and produces
43、an audible or visual signal that is clearly discernible when the device is activated in a manner that would normally produce a flame in a production lighter Note 1 to entry: This definition does not require a lighter to be modified with electronics or the like to produce a signal. Producers can use
44、as a surrogate lighter a production lighter but without fuel, if a distinct signal such as a “click” can be heard clearly when the mechanism is operated in each manner that would produce a flame in a production lighter. BS EN 13869:2016EN 13869:2016 (E) 8 3.7 model one or more lighters from the same
45、 producer that do not differ in design or other characteristics in any manner that can affect child-resistance Note 1 to entry: Lighter characteristics that can affect child-resistance include, but are not limited to, size, shape, case material and ignition mechanism (including child-resistant featu
46、res). 3.8 CEN geographical area geographical area, constituted of the territories of the States the national standards organizations which are “national member” of the European Committee for Standardization (CEN), according to Clause 6 of CEN statutes 3.9 operating button part of the lighter pressed
47、 to activate the ignition mechanism 3.10 nominal surface area of the operating button area of the smallest rectangle that can contain the operating button when viewed perpendicular to the direction in which the button moves when activating the ignition mechanism 3.11 push-button ignition lighter Pie
48、zoelectric lighter with straight linear displacement of its operating button that relies solely on the force of the operating button to provide its resistance to operation by young children Note 1 to entry: Other push-button ignition mechanisms may exist but are not covered by this definition. 4 Saf
49、ety requirements 4.1 General Clauses 4.4 and 4.5 do not apply to refillable repairable lighters defined in 3.2. 4.2 EN ISO 9994 Lighters shall comply with EN ISO 9994. 4.3 Non-child-appealing requirement No lighter shall be a child-appealing lighter. 4.4 Other requirements The mechanism or system of a lighter that makes the product resistant to successful operation by young children shall: a) reset itself automatically after each operation of the ignition mechanism of the lighter; b) not impair safe operation of the lighter when used in a normal a
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1