EN 13880-5-2004 en Hot applied joint sealants - Part 5 Test method for the determination of flow resistance《热接合密封剂 第5部分 流动阻力的测定》.pdf

1、BRITISH STANDARD BS EN 13880-5:2004 Hot applied joint sealants Part 5: Test method for the determination of flow resistance The European Standard EN 13880-5:2004 has the status of a British Standard ICS 93.080.20 BS EN 13880-5:2004 This British Standard was published under the authority of the Stand

2、ards Policy and Strategy Committee on 11 August 2004 BSI 11 August 2004 ISBN 0 580 44245 4 National foreword This British Standard is the official English language version of EN 13880-5:2004. The UK participation in its preparation was entrusted by Technical Committee B/510, Road materials, to Subco

3、mmittee B/510/3, Materials for concrete roads, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this docu

4、ment may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract.

5、 Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for ch

6、ange, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright no

7、tice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN138805 August2004 ICS93.080.20 Englishversion HotappliedjointsealantsPart5:Testmethodforthe determinationofflowresis

8、tance ProduitsdescellementdejointsappliquschaudPartie 5:Mthodedessaipourladterminationdelarsistance aufluage HeiverarbeitbareFugenmassenTeil5:Prfverfahren zurBestimmungderFlielnge ThisEuropeanStandardwasapprovedbyCENon2May2003. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstip

9、ulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,Fre

10、nch,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, German

11、y,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050

12、Brussels 2004CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN138805:2004:EEN 13880-5:2004 (E) 2 Contents page Foreword3 1 Scope 4 2 Normative references 4 3 Term and definition4 4 Principle4 5 Apparatus .4 6 Preparation and conditioning of the test

13、specimens.5 7 Test conditions 6 8 Procedure .6 9 Expression of results 6 10 Precision.6 11 Test report 6 EN 13880-5:2004 (E) 3 Foreword This document (EN 13880-5:2004) has been prepared by Technical Committee CEN/TC 227 “Road materials”, the secretariat of which is held by DIN. This European Standar

14、d shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2005, and conflicting national standards shall be withdrawn at the latest by February 2005. This document is one of a series of standards as listed below: EN 13

15、880-1 Hot applied joint sealants Part 1: Test method for the determination of density at 25 C EN 13880-2 Hot applied joint sealants Part 2: Test method for the determination of cone penetration at 25 C EN 13880-3 Hot applied joint sealants Part 3: Test method for the determination of penetration and

16、 recovery (resilience) EN 13880-4 Hot applied joint sealants Part 4: Test method for the determination of heat resistance Change in penetration value EN 13880-5 Hot applied joint sealants Part 5: Test method for the determination of flow resistance EN 13880-6 Hot applied joint sealants Part 6: Test

17、method for the preparation of samples for testing EN 13880-7 Hot applied joint sealants Part 7: Function testing of joint sealants EN 13880-8 Hot applied joint sealants Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion EN 13880-9

18、 Hot applied joint sealants Part 9: Test method for the determination of compatibility with asphalt pavements EN 13880-10 Hot applied joint sealants Part 10: Test method for the determination of adhesion and cohesion following continuous extension and compression EN 13880-11 Hot applied joint sealan

19、ts Part 11: Test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements EN 13880-12 Hot applied joint sealants Part 12: Test method for the manufacture of concrete test blocks for testing (recipe methods) EN 13880

20、-13 Hot applied joint sealants Part 13: Test method for the determination of the discontinuous extension (adherence test) According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium

21、, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 13880-5:2004 (E) 4 1 Scope This document

22、describes a method for determining the flow resistance of hot applied joint sealants. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of

23、the referenced document (including any amendments) applies. EN 13880-6, Hot applied joint sealants Part 6: Test method for the preparation of samples for testing. prEN 14188-1, Joint fillers and sealants Part 1:Specifications for hot applied sealants. ISO 188, Rubber, vulcanized or thermoplastic Acc

24、elerated ageing and heat resistance tests. 3 Term and definition For the purposes of this document, the terms and definitions given in prEN 14188-1 and the following apply. 3.1 flow resistance movement of the lower transverse edge of the test specimen, following a specified conditioning period 4 Pri

25、nciple A portion of the test specimen is poured to excess into the metal moulding frame, positioned on the metal plate. After cooling in air the test specimen is trimmed with a heated knife and the metal plate carrying the test specimen is mounted onto a metal stand, the whole assembly is then place

26、d into a controlled environment for 5h. The flow resistance is then calculated by measuring the movement along the lower transverse edge. 5 Apparatus 5.1 Laboratory oven conforming to ISO 188, with low air speed, capable of maintaining the test specimen and apparatus at the test temperature of (60,0

27、 2,5) C. 5.2 Metal frame comprising a steel frame conforming to Figure 1 with external dimensions (80 1) mm wide (100 1) mm long and internal dimensions (40 1) mm wide (60 1) mm long. 5.3 Release agent comprising a mixture of glycerine and dextrine. EN 13880-5:2004 (E) 5 Dimensions in millimetres Fi

28、gure 1 Mould frame 5.4 Metal plate roughened with sand paper grain 120, (60 1) mm wide (80 1) mm long (1,5 0,1) mm thick. 5.5 Metal stand conforming to Figure 2, designed to allow the metal plate containing the test specimen to be mounted so that the longitudinal axis of the test specimen is at an a

29、ngle of (75 2) with the horizontal, and the transverse axis is horizontal. Dimensions in millimetres Key 1 Stand for metal plate 2 Inclination adjustment screws 3 Metal plate 4 Test specimen Figure 2 Examples of stand with test specimen 6 Preparation and conditioning of the test specimens 6.1 Prepar

30、e the test specimen according to EN 13880-6 EN 13880-5:2004 (E) 6 6.2 Treat the inside of the metal frame with the release agent. Place the frame on the metal plate and fill the frame with an excess of the test specimen. Record the actual temperature at the end of pouring. 6.3 After cooling for 1 h

31、in air at standard laboratory conditions, trim the excess test specimen in the frame with a heated knife. 6.4 For each test, two test specimens shall be prepared. 7 Test conditions The test conditions shall be: temperature: (60,0 2,5) C; duration of test: 5 h 3 min. 8 Procedure 8.1 Remove the frame

32、and mark the existing profile of the sealant on the metal plate with an index line drawn parallel and along the lower transverse edge of the test specimen. 8.2 Place the metal stand in the oven set at the required test temperature for 30 min before beginning the test. 8.3 Place the metal plate conta

33、ining the test specimen on the metal stand, mounted so that the longitudinal axis of the test specimen is at an angle of (75 2) with the horizontal and the transverse axis is horizontal. Maintain the temperature of (60,0 2,5) C for 5 h 3 min. 8.4 After 5 h remove the assembly from the oven and measu

34、re the maximum movement of the lower transverse edge of the test specimen below the index line to the nearest 1 mm. 9 Expression of results Report the flow resistance as the average of the two determinations, rounded to the nearest 1 mm. 10 Precision Estimates of the repeatability and reproducibilit

35、y of this test method and of the variability due to sampling are not available yet but they will be included by amendment when known. 11 Test report The test report shall state that the test was carried out in accordance with this document and include the following information: a) name of test speci

36、men and related primers if used; b) source of test specimen and relevant primer (if applicable); c) batch number and date of manufacture where appropriate or expiry date; d) date of testing and results obtained; e) name of the analyst and test laboratory; blankBS EN 13880-5:2004 BSI 389 Chiswick Hig

37、h Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amen

38、dment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard w

39、ould inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the l

40、atest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In

41、response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards th

42、rough its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members

43、of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding onl

44、ine access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the inter

45、national standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. Thi

46、s does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.